So, every time I increase the size of the ramdisk, I tempt fate. In other point
of view, it's also the textbook definition as to why custom kernels aren't
supported here. Clearly, something's missing.
Peter Kay [syllops...@syllopsium.co.uk] wrote:
> I have a Pentium III system running 5.1 current with athn(4) hostap power
> saving patches or 5.2 current. It has the slightly unusual configuration of
> an ISA video card (X not used) and a 64 bit PCI NIC hacked to run in a 32
> bit slot, but is otherwise a bog standard desktop. It's running flashrd due
> to using an IDE to compact flash adaptor.
>
> 5.1 release is entirely stable (it may have hung once, perhaps, in months
> of operation).
>
> Once I put on 5.2 current (from a few days ago) or 5.1 stable with the
> latest athn patches the system hangs hard, in around 20 minutes to an hour.
> No response from network, console or anything suspicious in the log if I
> leave a tail -f /var/log/messages running. I suspect the athn patches
> aren't the problem, but they're the whole reason I'm trying to patch the
> firewall.
>
> I can try other hardware on a temporary basis, but what's the best method
> of diagnosing failure/possible things to try? Yes, flashrd does run a
> custom kernel, but the differences aren't that major and 5.1 release is
> reliable.
>
> dmesg :
>
> OpenBSD 5.1-stable (FLASHRD) #0: Mon Sep 3 04:52:51 BST 2012
> r...@fwbuilder.syllopsium.com:/usr/src/sys/arch/i386/compile/FLASHRD
> cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 502 MHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,SSE
> real mem = 267907072 (255MB)
> avail mem = 250122240 (238MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 04/23/99, BIOS32 rev. 0 @ 0xfb220,
> SMBIOS rev. 2.2 @ 0xf0800 (34 entries)
> bios0: vendor Award Software International, Inc. version
> "HW.27.04(QHW.04.00)" date 04/23/1999
> bios0: Hewlett-Packard HP Vectra
> apm0 at bios0: Power Management spec V1.2 (slowidle)
> acpi at bios0 function 0x0 not configured
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb6a0
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf00/144 (7 entries)
> pcibios0: PCI Exclusive IRQs: 3 10 11 15
> pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB ISA" rev 0x00)
> pcibios0: PCI bus #2 is the last bus
> bios0: ROM list: 0xc0000/0x8000
> cpu0 at mainbus0: (uniprocessor)
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
> intelagp0 at pchb0
> agp0 at intelagp0: aperture at 0xe0000000, size 0x4000000
> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
> pci1 at ppb0 bus 1
> clcs0 at pci0 dev 4 function 0 "Cirrus Logic CS4280/46xx CrystalClear" rev
> 0x01: irq 3
> ac97: codec id 0x43525903 (Cirrus Logic CS4297 rev 3)
> ac97: codec features headphone, 18 bit DAC, 18 bit ADC, No 3D Stereo
> piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
> pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel
> 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <CF Card>
> wd0: 1-sector PIO, LBA, 961MB, 1969632 sectors
> wd0(pciide0:0:0): using PIO mode 4
> pciide0: channel 1 ignored (disabled)
> uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 15
> piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x02: polling
> iic0 at piixpm0
> spdmem0 at iic0 addr 0x50: 128MB SDRAM non-parity PC100CL3
> spdmem1 at iic0 addr 0x51: 128MB SDRAM non-parity PC133CL3
> athn0 at pci0 dev 15 function 0 "Atheros AR5416" rev 0x01: irq 11
> athn0: MAC AR5416 rev 2, RF AR2133 (3T2R), ROM rev 5, address
> b0:48:7a:ec:9f:34
> ppb1 at pci0 dev 16 function 0 "DEC 21154 PCI-PCI" rev 0x02
> pci2 at ppb1 bus 2
> fxp0 at pci2 dev 4 function 0 "Intel 8255x" rev 0x05, i82558: irq 3,
> address 00:08:c7:91:b5:2a
> inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0
> fxp1 at pci2 dev 5 function 0 "Intel 8255x" rev 0x05, i82558: irq 10,
> address 00:08:c7:91:b5:2b
> inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 0
> isa0 at piixpcib0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
> wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> cannot support dma lance devices
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> mtrr: Pentium Pro MTRR support
> vscsi0 at root
> scsibus0 at vscsi0: 256 targets
> softraid0 at root
> scsibus1 at softraid0: 256 targets
> root on rd0a swap on rd0b dump on rd0b
> clcs0: image download error
> WARNING: /flash was not properly unmounted
>
> Thanks for any help
>
> Peter
--
Keep them laughing half the time, scared of you the other half. And always keep
them guessing. -- Clair George
