hi there,
urtwn(4) says that "D-Link DWA-121" is supported.
based on that i bought it. it is kind of working.
after a while i get this:
Sep 3 12:00:18 amaaq /bsd: urtwn0: device timeout
Sep 3 12:00:18 amaaq /bsd: urtwn0: could not send firmware command 5
Sep 3 12:00:27 amaaq last message repeated 4 times
Sep 3 12:00:27 amaaq /bsd: urtwn0: device timeout
Sep 3 12:00:29 amaaq /bsd: urtwn0: could not send firmware command 5
Sep 3 12:00:31 amaaq /bsd: urtwn0: could not send firmware command 5
Sep 3 12:00:32 amaaq /bsd: urtwn0: device timeout
Sep 3 12:00:33 amaaq /bsd: urtwn0: could not send firmware command 5
Sep 3 12:01:03 amaaq last message repeated 15 times
Sep 3 12:03:02 amaaq last message repeated 59 times
Sep 3 12:05:32 amaaq last message repeated 74 times
Sep 3 12:05:33 amaaq /bsd: urtwn0: device timeout
Sep 3 12:05:34 amaaq /bsd: urtwn0: could not send firmware command 5
Sep 3 12:05:42 amaaq last message repeated 4 times
Sep 3 12:05:42 amaaq /bsd: urtwn0: device timeout
Sep 3 12:05:44 amaaq /bsd: urtwn0: could not send firmware command 5
Sep 3 12:05:46 amaaq /bsd: urtwn0: could not send firmware command 5
Sep 3 12:05:47 amaaq /bsd: urtwn0: device timeout
Sep 3 12:05:48 amaaq /bsd: urtwn0: could not send firmware command 5
Sep 3 12:06:20 amaaq last message repeated 16 times
Sep 3 12:06:54 amaaq last message repeated 17 times
Sep 3 12:06:55 amaaq /bsd: urtwn0: device timeout
Sep 3 12:06:56 amaaq /bsd: urtwn0: could not send firmware command 5
Sep 3 12:07:27 amaaq last message repeated 15 times
but this netbook's usb is rather quirky,
if i boot it up with devices in the usb port,
the ports "do not work" if i remove them
and replace them again. or try a different usb device.
also, removing the usb nic results more often than not in:
Sep 3 11:17:16 amaaq /bsd: ehci_idone: ex=0xd1f58100 is done!
and the corresponding usb ports is also sometimes disabled:
Sep 3 10:17:09 amaaq /bsd: uhub3: device problem, disabling port 2
it is a pity that in 2012 they still cannot make a netbook
with a "normal" ACPI bios that just lets me live.
OpenBSD 5.2-current (GENERIC.MP) #6: Sat Sep 1 20:16:09 MDT 2012
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Atom(TM) CPU N570 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF
real mem = 1061818368 (1012MB)
avail mem = 1033539584 (985MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/31/10, SMBIOS rev. 2.6 @ 0xeb0f0 (53
entries)
bios0: vendor LENOVO version "50CN12WW" date 04/22/2011
bios0: LENOVO 20109
acpi0 at bios0: rev 3
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SLIC HPET
acpi0: wakeup devices P0P8(S4) PS2K(S3) PS2M(S3) EUSB(S3) P0PA(S4) P0PB(S4)
P0PC(S4) P0P9(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3) PWRB(S3) SLPB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N570 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Atom(TM) CPU N570 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Atom(TM) CPU N570 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (P0P8)
acpiprt2 at acpi0: bus -1 (P0PA)
acpiprt3 at acpi0: bus -1 (P0PB)
acpiprt4 at acpi0: bus -1 (P0PC)
acpiprt5 at acpi0: bus 1 (P0P9)
acpiec0 at acpi0
acpicpu0 at acpi0:, C3, C2, C1, PSS
acpicpu1 at acpi0:, C3, C2, C1, PSS
acpicpu2 at acpi0:, C3, C2, C1, PSS
acpicpu3 at acpi0:, C3, C2, C1, PSS
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: LID_
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "LNV-L10C6Y12" serial 004706 type LiIon
oem "CPT-ES3"
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
bios0: ROM list: 0xc0000/0xda00! 0xce000/0x1000
cpu0: Enhanced SpeedStep 1663 MHz: speeds: 1667, 1334, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 4 int 16
drm0 at inteldrm0
"Intel Pineview Video" rev 0x02 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8105E (0x4080), apic
4 int 16, address 50:af:73:14:da:b5
ukphy0 at re0 phy 7: Generic IEEE 802.3u media interface, rev. 2: OUI 0x000732,
model 0x0008
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci2 at ppb1 bus 2
pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x02: msi, AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, HITACHI HTS54323, ES2Z> SCSI3 0/direct
fixed naa.5000cca6c7d0d37f
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR3 SDRAM PC3-10600 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 5 configuration 1 interface 0 "Generic USB2.0-CRW" rev
2.00/38.82 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct
removable serial.0bda0138516388200000
sd1: 15484MB, 512 bytes/sector, 31711232 sectors
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Lenovo Lenovo EasyCamera"
rev 2.00/10.22 addr 3
video0 at uvideo0
ugen0 at uhub2 port 2 "Cambridge Silicon Radio Bluetooth" rev 2.00/52.76 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (65714a12cd3919f3.a) swap on sd0b dump on sd0b
--
enter any 12-digit prime number to continue:
