Hey,
I'm testing the new hibernate support on my ThinkPad T43 running current.
Many thanks to the developers for implementing this feature.
Unfortunately there's nothing happening at all when I issue the
ZZZ command. I see no increased disk activity and the laptop keeps
running and running for hours.
$ sudo ZZZ
Password:
Hibernating system...
$
I have enough swap space available:
$ swapctl -l
Device 512-blocks Used Avail Capacity Priority
/dev/wd0b 4203360 0 4203360 0% 0
And my hardware is supported:
$ dmesg
OpenBSD 5.2 (GENERIC) #1: Fri Jul 20 19:05:31 CEST 2012
root@laptop:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.86GHz ("GenuineIntel" 686-class)
1.87 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,NXE,EST,TM2
real mem = 1072033792 (1022MB)
avail mem = 1043660800 (995MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/07/05, BIOS32 rev. 0 @ 0xfd760,
SMBIOS rev. 2.33 @ 0xe0010 (64 entries)
bios0: vendor IBM version "1YET59WW (1.24 )" date 11/07/2005
bios0: IBM 2668AG2
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd6f0/0x910
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/256 (14 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
cpu0: Enhanced SpeedStep 1863 MHz: speeds: 1867, 1600, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
io address conflict 0x5800/0x8
io address conflict 0x5808/0x4
io address conflict 0x5810/0x8
io address conflict 0x580c/0x4
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82915GM PCIE" rev 0x03: irq 11
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M300 M22" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: irq 11
drm0 at radeondrm0
ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: irq 11
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1
(0x4101): irq 11, address 00:10:c6:e2:b7:92
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x03: irq 11
pci3 at ppb2 bus 3
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 11
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci4 at ppb3 bus 4
cbb0 at pci4 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x8d: irq 11
iwi0 at pci4 dev 2 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq
11, address 00:16:6f:04:c2:e6
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 5 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq 11,
ICH6 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS541060G9AT00>
wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8083N, 0K04> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 11
iic0 at ichiic0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 5.9
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (98d0b835e59425c9.a) swap on wd0b dump on wd0b
iwi0: timeout waiting for master
Is there anything I can do to troubleshoot this further?
Thanks
Andre
