Hi,
I`m having a problem to establish a IPSEC transport between two
openbsd hosts (one with 5.1 and the other with 4.9). They are
configured to use the transport mode (confs bellow).
When I run "isakmpd -K ; ipsecctl -f /etc/ipsec.conf" on both hosts,
no SA are created. What did I miss?
Thanks,
Mosconi
OBSD51 (hubble):
PF:
# pfctl -sr
pass all flags S/SA
block drop in on ! lo0 proto tcp from any to any port 6000:6010
# ping -c 5 spitzer
PING spitzer.domain (IP_SPITZER): 56 data bytes
64 bytes from IP_SPITZER: icmp_seq=0 ttl=244 time=69.193 ms
64 bytes from IP_SPITZER: icmp_seq=1 ttl=244 time=70.835 ms
64 bytes from IP_SPITZER: icmp_seq=2 ttl=244 time=70.223 ms
64 bytes from IP_SPITZER: icmp_seq=3 ttl=244 time=70.740 ms
64 bytes from IP_SPITZER: icmp_seq=4 ttl=244 time=69.469 ms
--- spitzer.domain ping statistics ---
5 packets transmitted, 5 packets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 69.193/70.092/70.835/0.661 ms
# cat /etc/ipsec.conf
# $OpenBSD: ipsec.conf,v 1.5 2006/09/14 15:10:43 hshoexer Exp $
#
# See ipsec.conf(5) for syntax and examples.
# Set up two tunnels using automatic keying with isakmpd(8):
#
# First between the networks 10.1.1.0/24 and 10.1.2.0/24,
# second between the machines 192.168.3.1 and 192.168.3.2.
# Use FQDNs as IDs.
ike esp transport from hubble to spitzer \
main \
auth hmac-sha2-512 \
enc aes-256 \
group modp4096 \
srcid hubble.domain \
dstid spitzer.domain \
psk '/+V1gt9G6FTQ"_}/Rn#nny!ZCgmd5+jIe^dKXf+)40R6%ZS(zD8Q2DUt[T(NwJOy'
# ipsecctl -vvf /etc/ipsec.conf
@0 C set [Phase 1]:IP_SPITZER=peer-IP_SPITZER force
C set [peer-IP_SPITZER]:Phase=1 force
C set [peer-IP_SPITZER]:Address=IP_SPITZER force
C set
[peer-IP_SPITZER]:Authentication=/+V1gt9G6FTQ"_}/Rn#nny!ZCgmd5+jIe^dKXf+)40R6%ZS(zD8Q2DUt[T(NwJOy
force
C set [peer-IP_SPITZER]:Configuration=phase1-peer-IP_SPITZER force
C set [phase1-peer-IP_SPITZER]:EXCHANGE_TYPE=ID_PROT force
C add [phase1-peer-IP_SPITZER]:Transforms=AES-256-SHA2-512-GRP16 force
C set [peer-IP_SPITZER]:ID=id-hubble.domain force
C set [id-hubble.domain]:ID-type=FQDN force
C set [id-hubble.domain]:Name=hubble.domain force
C set [peer-IP_SPITZER]:Remote-ID=id-spitzer.domain force
C set [id-spitzer.domain]:ID-type=FQDN force
C set [id-spitzer.domain]:Name=spitzer.domain force
C set [from-IP_HUBBLE-to-IP_SPITZER]:Phase=2 force
C set [from-IP_HUBBLE-to-IP_SPITZER]:ISAKMP-peer=peer-IP_SPITZER force
C set
[from-IP_HUBBLE-to-IP_SPITZER]:Configuration=phase2-from-IP_HUBBLE-to-IP_SPITZER
force
C set [from-IP_HUBBLE-to-IP_SPITZER]:Local-ID=from-IP_HUBBLE force
C set [from-IP_HUBBLE-to-IP_SPITZER]:Remote-ID=to-IP_SPITZER force
C set [phase2-from-IP_HUBBLE-to-IP_SPITZER]:EXCHANGE_TYPE=QUICK_MODE force
C set
[phase2-from-IP_HUBBLE-to-IP_SPITZER]:Suites=QM-ESP-TRP-AES-SHA2-256-PFS-SUITE
force
C set [from-IP_HUBBLE]:ID-type=IPV4_ADDR force
C set [from-IP_HUBBLE]:Address=IP_HUBBLE force
C set [to-IP_SPITZER]:ID-type=IPV4_ADDR force
C set [to-IP_SPITZER]:Address=IP_SPITZER force
C add [Phase 2]:Connections=from-IP_HUBBLE-to-IP_SPITZER
@1 C set [Phase 1]:IP6_SPITZER=peer-IP6_SPITZER force
C set [peer-IP6_SPITZER]:Phase=1 force
C set [peer-IP6_SPITZER]:Address=IP6_SPITZER force
C set
[peer-IP6_SPITZER]:Authentication=/+V1gt9G6FTQ"_}/Rn#nny!ZCgmd5+jIe^dKXf+)40R6%ZS(zD8Q2DUt[T(NwJOy
force
C set [peer-IP6_SPITZER]:Configuration=phase1-peer-IP6_SPITZER force
C set [phase1-peer-IP6_SPITZER]:EXCHANGE_TYPE=ID_PROT force
C add [phase1-peer-IP6_SPITZER]:Transforms=AES-256-SHA2-512-GRP16 force
C set [peer-IP6_SPITZER]:ID=id-hubble.domain force
C set [id-hubble.domain]:ID-type=FQDN force
C set [id-hubble.domain]:Name=hubble.domain force
C set [peer-IP6_SPITZER]:Remote-ID=id-spitzer.domain force
C set [id-spitzer.domain]:ID-type=FQDN force
C set [id-spitzer.domain]:Name=spitzer.domain force
C set [from-IP6_HUBBLE-to-IP6_SPITZER]:Phase=2 force
C set [from-IP6_HUBBLE-to-IP6_SPITZER]:ISAKMP-peer=peer-IP6_SPITZER force
C set
[from-IP6_HUBBLE-to-IP6_SPITZER]:Configuration=phase2-from-IP6_HUBBLE-to-IP6_SPITZER
force
C set [from-IP6_HUBBLE-to-IP6_SPITZER]:Local-ID=from-IP6_HUBBLE force
C set [from-IP6_HUBBLE-to-IP6_SPITZER]:Remote-ID=to-IP6_SPITZER force
C set [phase2-from-IP6_HUBBLE-to-IP6_SPITZER]:EXCHANGE_TYPE=QUICK_MODE force
C set
[phase2-from-IP6_HUBBLE-to-IP6_SPITZER]:Suites=QM-ESP-TRP-AES-SHA2-256-PFS-SUITE
force
C set [from-IP6_HUBBLE]:ID-type=IPV6_ADDR force
C set [from-IP6_HUBBLE]:Address=IP6_HUBBLE force
C set [to-IP6_SPITZER]:ID-type=IPV6_ADDR force
C set [to-IP6_SPITZER]:Address=IP6_SPITZER force
C add [Phase 2]:Connections=from-IP6_HUBBLE-to-IP6_SPITZER
# cat /var/run/dmesg.boot
OpenBSD 5.1 (GENERIC) #160: Sun Feb 12 09:46:33 MST 2012
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: QEMU Virtual CPU version 1.0 ("GenuineIntel" 686-class) 2.54 GHz
cpu0:
FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,LONG,SSE3,CX16,POPCNT,LAHF
real mem = 267960320 (255MB)
avail mem = 253480960 (241MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/23/99, BIOS32 rev. 0 @
0xff046, SMBIOS rev. 2.4 @ 0xfd930 (10 entries)
bios0: vendor Bochs version "Bochs" date 01/01/2007
bios0: Bochs Bochs
acpi0 at bios0: rev 0
acpi0: sleep states S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC HPET
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
acpihpet0 at acpi0: 100000000 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: unknown i686 model 0x2, can't get bus clock (0x0)
cpu0: apic clock running at 1000MHz
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type ISA
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
bios0: ROM list: 0xc0000/0x8e00 0xc9000/0xa00 0xca000/0xa00
0xcb000/0x600 0xcb800/0x2400
vmt0 at mainbus0
vmware: open failed, eax=564d5868, ecx=0000001e, edx=00005658
vmt0: failed to open backdoor RPC channel (TCLO protocol)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 1 int 11
piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic 1 int 9
iic0 at piixpm0
iic0: addr 0x19 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=0000
01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x1b 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=0000
01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x1c 0f=00 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words
00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x1d 0f=00 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words
00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x1e 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=0000
01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x1f 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=0000
01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x29 00=d0 01=d0 02=d0 03=d0 04=d0 05=d0 06=d0 07=d0 08=d0
words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x2b 00=d0 01=d0 02=d0 03=d0 04=d0 05=d0 06=d0 07=d0 08=d0
words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x4c 00=d0 01=d0 02=d0 03=d0 04=d0 05=d0 06=d0 07=d0 08=d0
words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x4e 00=d0 01=d0 02=d0 03=d0 04=d0 05=d0 06=d0 07=d0 08=d0
words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
re0 at pci0 dev 3 function 0 "Realtek 8139" rev 0x20: RTL8139C+
(0x7480), apic 1 int 11, address 52:54:00:ae:81:38
rlphy0 at re0 phy 0: RTL internal PHY
re1 at pci0 dev 4 function 0 "Realtek 8139" rev 0x20: RTL8139C+
(0x7480), apic 1 int 11, address 52:54:00:40:71:14
rlphy1 at re1 phy 0: RTL internal PHY
siop0 at pci0 dev 5 function 0 "Symbios Logic 53c895A" rev 0x00: apic
1 int 10, using 8K of on-board RAM
scsibus0 at siop0: 16 targets, initiator 7
siop0: bad offset in siop_sdp (17)
sd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU HARDDISK, 1.0> SCSI3 0/direct fixed
sd0: 5120MB, 512 bytes/sector, 10485760 sectors
siop0: bad offset in siop_sdp (17)
cd0 at scsibus0 targ 1 lun 0: <QEMU, QEMU CD-ROM, 1.0> SCSI3 5/cdrom removable
"Qumranet Virtio Memory" rev 0x00 at pci0 dev 6 function 0 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: density unknown
fd1 at fdc0 drive 1: density unknown
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
nvram: invalid checksum
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (6c9545cabdb4b09c.a) swap on sd0b dump on sd0b
clock: unknown CMOS layout
OBSD49 (spitzer):
$ pfctl -sr
pass all flags S/SA keep state
block drop in on ! lo0 proto tcp from any to any port 6000:6010
spitzer[~]$ ping -c 5 hubble
PING hubble.domain (IP_HUBBLE): 56 data bytes
64 bytes from IP_HUBBLE: icmp_seq=0 ttl=244 time=69.185 ms
64 bytes from IP_HUBBLE: icmp_seq=1 ttl=244 time=69.367 ms
64 bytes from IP_HUBBLE: icmp_seq=2 ttl=244 time=70.129 ms
64 bytes from IP_HUBBLE: icmp_seq=3 ttl=244 time=72.605 ms
64 bytes from IP_HUBBLE: icmp_seq=4 ttl=244 time=69.694 ms
--- hubble.domain ping statistics ---
5 packets transmitted, 5 packets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 69.185/70.196/72.605/1.246 ms
spitzer[~]$
spitzer[~]$ cat /etc/ipsec.conf
# $OpenBSD: ipsec.conf,v 1.5 2006/09/14 15:10:43 hshoexer Exp $
#
# See ipsec.conf(5) for syntax and examples.
# Set up two tunnels using automatic keying with isakmpd(8):
#
# First between the networks 10.1.1.0/24 and 10.1.2.0/24,
# second between the machines 192.168.3.1 and 192.168.3.2.
# Use FQDNs as IDs.
ike esp transport from spitzer to hubble \
main \
auth hmac-sha2-512 \
enc aes-256 \
group modp4096 \
srcid spitzer.domain \
dstid hubble.domain \
psk '/+V1gt9G6FTQ"_}/Rn#nny!ZCgmd5+jIe^dKXf+)40R6%ZS(zD8Q2DUt[T(NwJOy'
$ ipsecctl -vvf /etc/ipsec.conf
@0 C set [Phase 1]:IP_HUBBLE=peer-IP_HUBBLE force
C set [peer-IP_HUBBLE]:Phase=1 force
C set [peer-IP_HUBBLE]:Address=IP_HUBBLE force
C set
[peer-IP_HUBBLE]:Authentication=/+V1gt9G6FTQ"_}/Rn#nny!ZCgmd5+jIe^dKXf+)40R6%ZS(zD8Q2DUt[T(NwJOy
force
C set [peer-IP_HUBBLE]:Configuration=phase1-peer-IP_HUBBLE force
C set [phase1-peer-IP_HUBBLE]:EXCHANGE_TYPE=ID_PROT force
C add [phase1-peer-IP_HUBBLE]:Transforms=AES-256-SHA2-512-GRP16 force
C set [peer-IP_HUBBLE]:ID=id-spitzer.domain force
C set [id-spitzer.domain]:ID-type=FQDN force
C set [id-spitzer.domain]:Name=spitzer.domain force
C set [peer-IP_HUBBLE]:Remote-ID=id-hubble.domain force
C set [id-hubble.domain]:ID-type=FQDN force
C set [id-hubble.domain]:Name=hubble.domain force
C set [from-IP_SPITZER-to-IP_HUBBLE]:Phase=2 force
C set [from-IP_SPITZER-to-IP_HUBBLE]:ISAKMP-peer=peer-IP_HUBBLE force
C set
[from-IP_SPITZER-to-IP_HUBBLE]:Configuration=phase2-from-IP_SPITZER-to-IP_HUBBLE
force
C set [from-IP_SPITZER-to-IP_HUBBLE]:Local-ID=from-IP_SPITZER force
C set [from-IP_SPITZER-to-IP_HUBBLE]:Remote-ID=to-IP_HUBBLE force
C set [phase2-from-IP_SPITZER-to-IP_HUBBLE]:EXCHANGE_TYPE=QUICK_MODE force
C set
[phase2-from-IP_SPITZER-to-IP_HUBBLE]:Suites=QM-ESP-TRP-AES-SHA2-256-PFS-SUITE
force
C set [from-IP_SPITZER]:ID-type=IPV4_ADDR force
C set [from-IP_SPITZER]:Address=IP_SPITZER force
C set [to-IP_HUBBLE]:ID-type=IPV4_ADDR force
C set [to-IP_HUBBLE]:Address=IP_HUBBLE force
C add [Phase 2]:Connections=from-IP_SPITZER-to-IP_HUBBLE
@1 C set [Phase 1]:IP6_HUBBLE=peer-IP6_HUBBLE force
C set [peer-IP6_HUBBLE]:Phase=1 force
C set [peer-IP6_HUBBLE]:Address=IP6_HUBBLE force
C set
[peer-IP6_HUBBLE]:Authentication=/+V1gt9G6FTQ"_}/Rn#nny!ZCgmd5+jIe^dKXf+)40R6%ZS(zD8Q2DUt[T(NwJOy
force
C set [peer-IP6_HUBBLE]:Configuration=phase1-peer-IP6_HUBBLE force
C set [phase1-peer-IP6_HUBBLE]:EXCHANGE_TYPE=ID_PROT force
C add [phase1-peer-IP6_HUBBLE]:Transforms=AES-256-SHA2-512-GRP16 force
C set [peer-IP6_HUBBLE]:ID=id-spitzer.domain force
C set [id-spitzer.domain]:ID-type=FQDN force
C set [id-spitzer.domain]:Name=spitzer.domain force
C set [peer-IP6_HUBBLE]:Remote-ID=id-hubble.domain force
C set [id-hubble.domain]:ID-type=FQDN force
C set [id-hubble.domain]:Name=hubble.domain force
C set [from-IP6_SPITZER-to-IP6_HUBBLE]:Phase=2 force
C set [from-IP6_SPITZER-to-IP6_HUBBLE]:ISAKMP-peer=peer-IP6_HUBBLE force
C set
[from-IP6_SPITZER-to-IP6_HUBBLE]:Configuration=phase2-from-IP6_SPITZER-to-IP6_HUBBLE
force
C set [from-IP6_SPITZER-to-IP6_HUBBLE]:Local-ID=from-IP6_SPITZER force
C set [from-IP6_SPITZER-to-IP6_HUBBLE]:Remote-ID=to-IP6_HUBBLE force
C set [phase2-from-IP6_SPITZER-to-IP6_HUBBLE]:EXCHANGE_TYPE=QUICK_MODE force
C set
[phase2-from-IP6_SPITZER-to-IP6_HUBBLE]:Suites=QM-ESP-TRP-AES-SHA2-256-PFS-SUITE
force
C set [from-IP6_SPITZER]:ID-type=IPV6_ADDR force
C set [from-IP6_SPITZER]:Address=IP6_SPITZER force
C set [to-IP6_HUBBLE]:ID-type=IPV6_ADDR force
C set [to-IP6_HUBBLE]:Address=IP6_HUBBLE force
C add [Phase 2]:Connections=from-IP6_SPITZER-to-IP6_HUBBLE
$ dmesg
OpenBSD 4.9 (GENERIC) #671: Wed Mar 2 07:09:00 MST 2011
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: QEMU Virtual CPU version 0.14.1 ("GenuineIntel" 686-class) 2.54 GHz
cpu0:
FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16,POPCNT
real mem = 267993088 (255MB)
avail mem = 253476864 (241MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/23/99, BIOS32 rev. 0 @
0xff046, SMBIOS rev. 2.4 @ 0xffffef0 (10 entries)
bios0: vendor Bochs version "Bochs" date 01/01/2007
bios0: Bochs Bochs
acpi0 at bios0: rev 0
acpi0: sleep states S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC HPET
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
acpihpet0 at acpi0: 100000000 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: unknown i686 model 0x2, can't get bus clock (0x0)
cpu0: apic clock running at 999MHz
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type ISA
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
bios0: ROM list: 0xc0000/0x8c00 0xc9000/0x10000 0xd9000/0x600
0xd9800/0x2200
vmt0 at mainbus0
vmware: open failed, eax=564d5868, ecx=0000001e, edx=00005658
vmt0: failed to open backdoor RPC channel (TCLO protocol)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 1
int 11 (irq 11)
piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic
1 int 9 (irq 10)
iic0 at piixpm0
iic0: addr 0x19 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=0000
01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x1b 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=0000
01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x1c 0f=00 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words
00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x1d 0f=00 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words
00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x1e 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=0000
01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x1f 3e=00 48=00 4a=00 4e=00 fc=00 fe=00 words 00=0000
01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x29 00=d0 01=d0 02=d0 03=d0 04=d0 05=d0 06=d0 07=d0 08=d0
words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x2b 00=d0 01=d0 02=d0 03=d0 04=d0 05=d0 06=d0 07=d0 08=d0
words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x4c 00=d0 01=d0 02=d0 03=d0 04=d0 05=d0 06=d0 07=d0 08=d0
words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x4e 00=d0 01=d0 02=d0 03=d0 04=d0 05=d0 06=d0 07=d0 08=d0
words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
re0 at pci0 dev 3 function 0 "Realtek 8139" rev 0x20: RTL8139C+
(0x7480), apic 1 int 11 (irq 11), address 52:54:00:92:c4:b6
rlphy0 at re0 phy 0: RTL internal PHY
re1 at pci0 dev 4 function 0 "Realtek 8139" rev 0x20: RTL8139C+
(0x7480), apic 1 int 11 (irq 11), address 52:54:00:fc:42:df
rlphy1 at re1 phy 0: RTL internal PHY
siop0 at pci0 dev 5 function 0 "Symbios Logic 53c895A" rev 0x00: apic
1 int 10 (irq 10), using 8K of on-board RAM
scsibus0 at siop0: 16 targets, initiator 7
siop0: bad offset in siop_sdp (17)
sd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU HARDDISK, 0.14> SCSI3 0/direct fixed
sd0: 5120MB, 512 bytes/sec, 10485760 sec total
siop0: bad offset in siop_sdp (17)
cd0 at scsibus0 targ 1 lun 0: <QEMU, QEMU CD-ROM, 0.14> SCSI3 5/cdrom removable
"Qumranet Virtio Memory" rev 0x00 at pci0 dev 6 function 0 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: density unknown
fd1 at fdc0 drive 1: density unknown
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
nvram: invalid checksum
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
clock: unknown CMOS layout
scsibus2 at softraid0: 1 targets
sd1 at scsibus2 targ 0 lun 0: <OPENBSD, SR CRYPTO, 004> SCSI2 0/direct fixed
sd1: 4470MB, 512 bytes/sec, 9156522 sec total
