hello, trying to use an intel centrino w/ wimax
6150 on version 5.1, i have been trying to figure this out
but
have had no luck
pcidump -vx shows;
13:0:0: Intel WiFi Link 6150
0x0000: Vendor ID: 8086 Product ID: 0886
0x0004: Command: 0006 Status ID: 0010
0x0008: Class: 02 Subclass: 80 Interface: 00 Revision: 67
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size:
10
0x0010: BAR mem 64bit addr: 0x00000000c4500000/0x00002000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 1315
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 03 Min Gnt: 00 Max Lat: 00
0x00c8: Capability 0x01: Power Management
0x00d0: Capability 0x05: Message Signaled Interrupts (MSI)
0x00e0: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 GT/s Link Width: x1 / x1
0x0000: 08868086 00100006 02800067 00000010
0x0010: c4500004 00000000 00000000 00000000
0x0020: 00000000 00000000 00000000 13158086
0x0030: 00000000 000000c8 00000000 00000103
and usbdevs -v shows;
port 5 addr 3: high speed, self powered, config 1, Intel(R) Centrino(R)
Wireless-N + WiMAX 6150(0x07d7), Intel Corporation(0x8087), rev 0.00
