Since the 12 June snapshot I have been unable to run fvwm, either from xdm or
using startx. Dmesg and Xorg.log below.
--
Ed Ahlsen-Girard
Ft. Walton Beach FL
OpenBSD 5.1-current (GENERIC) #231: Tue Jun 12 18:31:26 MDT 2012
t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.66GHz ("GenuineIntel" 686-class) 2.66 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 1072713728 (1023MB)
avail mem = 1044353024 (995MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/23/03, BIOS32 rev. 0 @ 0xffe90, SMBIOS
rev. 2.3 @ 0xf0450 (56 entries)
bios0: vendor Dell Computer Corporation version "A08" date 09/23/2003
bios0: Dell Computer Corporation Dimension 4550
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC BOOT ASF!
acpi0: wakeup devices VBTN(S4) PCI0(S3) USB0(S3) USB1(S3) USB2(S3) PCI1(S5)
KBD_(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132MHz
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PCI1)
acpicpu0 at acpi0
acpibtn0 at acpi0: VBTN
bios0: ROM list: 0xc0000/0xf800 0xcf800/0x800 0xe0000/0x1800 0xe1800/0x2800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x01
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe8000000, size 0x8000000
ppb0 at pci0 dev 1 function 0 "Intel 82845G AGP" rev 0x01
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce4 MX 420" rev 0xa3
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: apic 8 int 16
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: apic 8 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: apic 8 int 18
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: apic 8 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x81
pci2 at ppb1 bus 2
cmpci0 at pci2 dev 0 function 0 "C-Media Electronics CMI8738/C3DX Audio" rev
0x10: apic 8 int 21
audio0 at cmpci0
opl at cmpci0 not configured
mpu at cmpci0 not configured
vendor "Broadcom", unknown product 0x4212 (class communications subclass modem,
rev 0x02) at pci2 dev 1 function 0 not configured
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x81, i82562: apic 8 int
20, address 00:07:e9:c3:c0:ba
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD600BB-75CAA0>
wd0: 16-sector PIO, LBA, 57220MB, 117187500 sectors
wd1 at pciide0 channel 0 drive 1: <WDC WD800JB-00JJC0>
wd1: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD+RW ND-1100A, 10GE> ATAPI 5/cdrom
removable
wd2 at pciide0 channel 1 drive 1: <WDC WD800JB-00JJC0>
wd2: 16-sector PIO, LBA, 76319MB, 156301488 sectors
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: apic 8 int 17
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
ulpt0 at uhub2 port 2 configuration 1 interface 1 "hp officejet 5500 series"
rev 2.00/1.00 addr 2
ulpt0: using bi-directional mode
ugen0 at uhub2 port 2 configuration 1 "hp officejet 5500 series" rev 2.00/1.00
addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd1a swap on wd1b dump on wd1b
Xorg.log
[ 15.319] (II) Loading /usr/X11R6/lib/modules/libxaa.so
[ 15.355] (II) Module xaa: vendor="X.Org Foundation"
[ 15.355] compiled for 1.12.2, module version = 1.2.1
[ 15.355] ABI class: X.Org Video Driver, version 12.0
[ 15.355] (II) Loading sub module "ramdac"
[ 15.355] (II) LoadModule: "ramdac"
[ 15.355] (II) Module "ramdac" already built-in
[ 15.355] (II) UnloadModule: "vesa"
[ 15.355] (II) Unloading vesa
[ 15.355] (--) Depth 24 pixmap format is 32 bpp
[ 15.367] Segmentation fault at address 0x0
[ 15.367]
Fatal server error:
[ 15.367] Caught signal 11 (Segmentation fault). Server aborting
[ 15.367]
[ 15.367]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 15.367] Please also check the log file at "/var/log/Xorg.0.log" for additio
nal information.
[ 15.367]
[ 15.376] Server terminated with error (1). Closing log file.
