On Fri, Jun 15, 2012 at 7:40 PM, Jan Stary <h...@stare.cz> wrote: > 5.1/current @ HP EliteBook 8530w. Sometimes during boot, acpitz says > > acpitz2: critical temperature exceeded 5424C (56976K), shutting down > > and at the end of the booting sequence, > > Process (pid 1) got signal 31 > > It seems to happen more often when running on battery. > > The temperature numbers must somehow be absurdly wrong, > unless there really is 5424 degrees. Also, 5424C is not 56976K. > Also, it continues to run fine: it does not shut down even though > it decided to. > > The acpidump is available at > http://stare.cz/dmesg/hp-elitebook-8530w.tar.gz > > Is there something I should specifically test?
See here http://marc.info/?l=openbsd-misc&w=2&r=1&s=critical+temperature+exceeded&q=b . Most probably message from Theo and some previous email with patch, but was not working for some people. There's some "workaround" tested as well - removing battery and running with apmd -C > > Jan > > > OpenBSD 5.1-current (GENERIC) #230: Mon Jun 11 12:10:30 MDT 2012 > t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC > RTC BIOS diagnostic error bb<clock_battery,config_unit,memory_size,fixed_disk> > cpu0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel" 686-class) 2.53 GHz > cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,SMX,EST, TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,LAHF > real mem = 2125709312 (2027MB) > avail mem = 2080153600 (1983MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 11/10/08, SMBIOS rev. 2.4 @ 0x7edbf000 (21 entries) > bios0: vendor Hewlett-Packard version "68PDV Ver. F.06" date 12/15/2008 > bios0: Hewlett-Packard HP EliteBook 8530w > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SLIC SSDT DMAR ASF! SSDT SSDT SSDT SSDT > acpi0: wakeup devices LANC(S5) HDEF(S4) RP02(S5) WNIC(S5) RP03(S5) ECF0(S5) RP05(S5) ECF0(S5) RP06(S5) NIC_(S5) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3) U6RM(S3) EHC1(S3) EHC2(S3) PCIB(S5) HST1(S5) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 266MHz > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 0, remapped to apid 1 > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpiprt0 at acpi0: bus 1 (PEGP) > acpiprt1 at acpi0: bus 2 (RP01) > acpiprt2 at acpi0: bus 3 (RP02) > acpiprt3 at acpi0: bus 4 (RP03) > acpiprt4 at acpi0: bus 69 (RP05) > acpiprt5 at acpi0: bus 134 (PCIB) > acpiprt6 at acpi0: bus 0 (PCI0) > acpiec0 at acpi0 > acpicpu0 at acpi0: C3, C2, C1, PSS > acpipwrres0 at acpi0: APPR > acpipwrres1 at acpi0: COMP > acpipwrres2 at acpi0: LPP_ > acpipwrres3 at acpi0: PGF0 > acpitz0 at acpi0: critical temperature is 115 degC > acpitz1 at acpi0: critical temperature is 105 degC > acpitz2 at acpi0: critical temperature is 112 degC > acpitz3 at acpi0: critical temperature is 112 degC > acpitz4 at acpi0: critical temperature is 90 degC > acpitz5 at acpi0: critical temperature is 112 degC > acpibat0 at acpi0: BAT0 model "Primary" serial 34704 2002/12/16 type LIon oem "Hewlett-Packard" > acpibat1 at acpi0: BAT1 not present > acpiac0 at acpi0: AC unit offline > acpibtn0 at acpi0: SLPB > acpibtn1 at acpi0: LID_ > acpivideo0 at acpi0: DGFX > acpivout0 at acpivideo0: LCD_ > bios0: ROM list: 0xc0000/0xe200 0xce800/0x1000 0xcf800/0x1000 > cpu0: Enhanced SpeedStep 2528 MHz: speeds: 2534, 2533, 1600, 800 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 > ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: apic 1 int 16 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x065c rev 0xa1 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured > pciide0 at pci0 dev 3 function 2 "Intel GM45 PT IDER" rev 0x07: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI > pciide0: using apic 1 int 18 for native-PCI interrupt > pciide0: channel 0 ignored (not responding; disabled or no drives?) > pciide0: channel 1 ignored (not responding; disabled or no drives?) > puc0 at pci0 dev 3 function 3 "Intel GM45 KT" rev 0x07: ports: 1 com > com3 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo > com3: probed fifo depth: 15 bytes > em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address 00:23:7d:e7:ac:60 > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16 > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17 > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi > azalia0: codecs: Analog Devices AD1984A, 0x0000/0x0000, using Analog Devices AD1984A > audio0 at azalia0 > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 16 > pci2 at ppb1 bus 2 > ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 17 > pci3 at ppb2 bus 3 > iwn0 at pci3 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, MIMO 3T3R, MoW, address 00:21:6a:0f:b2:8e > ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 1 int 18 > pci4 at ppb3 bus 4 > ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 16 > pci5 at ppb4 bus 69 > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20 > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 22 > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 20 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 > pci6 at ppb5 bus 134 > sdhc0 at pci6 dev 9 function 0 "Ricoh 5C822 SD/MMC" rev 0x25: apic 1 int 22 > sdmmc0 at sdhc0 > "Ricoh 5C843 MMC" rev 0x14 at pci6 dev 9 function 1 not configured > "Ricoh 5C592 Memory Stick" rev 0x14 at pci6 dev 9 function 2 not configured > "Ricoh 5C852 xD" rev 0x14 at pci6 dev 9 function 3 not configured > cbb0 at pci6 dev 9 function 4 "Ricoh 5C476 CardBus" rev 0xbb: apic 1 int 22 > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 135 device 0 cacheline 0x0, lattimer 0x20 > pcmcia0 at cardslot0 > pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03 > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2 > scsibus0 at ahci0: 32 targets > sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS72322, FCDO> SCSI3 0/direct fixed naa.5000cca583c16d27 > sd0: 238475MB, 512 bytes/sector, 488397168 sectors > cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-T50L, SC04> ATAPI 5/cdrom removable > usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > wsmouse1 at pms0 mux 0 > pms0: Synaptics touchpad, firmware 7.0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > mtrr: Pentium Pro MTRR support > "RICOH, Bay8Controller" (manufacturer 0x0, product 0x0) at pcmcia0 function 0 not configured > acpitz2: critical temperature exceeded 5424C (56976K), shutting down > uvideo0 at uhub0 port 5 configuration 1 interface 0 "Chicony Electronics Co., Ltd. CKA7216" rev 2.00/32.18 addr 2 > video0 at uvideo0 > ugen0 at uhub2 port 1 "Broadcom Corp HP Integrated Module" rev 2.00/1.00 addr 2 > ugen1 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on sd0a (2bc64a6c405e47ad.a) swap on sd0b dump on sd0b > Process (pid 1) got signal 31
