Hi:
Is OpenBSD 3.8 compatible with the optical
DVD-RW/CD-RW CF-VDM291U MultiDrive for the CF-29
ToughBook?
--- Jared Solomon <[EMAIL PROTECTED]> wrote:
> Hello,
>
> Here is the dmesg for my Panasonic Toughbook CF-72.
> When booting the
> install cd, I had to disable ahc else the boot would
> hang.
>
> I also have not got the aironet 350 working. Any
> assistance would be
> appreciated.
> dmesg says
> "Aironet MPI-350 Wireless" rev 0x00 at pci2 dev 3
> function 0 not configured
>
>
>
> full dmesg
> follows________________________________________
>
> OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT
> 2005
>
>
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz
> ("GenuineIntel"
> 686-class) 1.20 GHz
> cpu0:
>
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX
> ,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
> real mem = 804298752 (785448K)
> avail mem = 726609920 (709580K)
> using 4278 buffers containing 40316928 bytes
> (39372K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(10) BIOS, date 09/17/02,
> BIOS32 rev. 0 @ 0xfd870
> apm0 at bios0: Power Management spec V1.2
> apm0: battery life expectancy 99%
> apm0: AC off, battery charge high
> apm0: flags 30102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xfd870/0x790
> pcibios0: PCI IRQ Routing Table rev 1.0 @
> 0xfdf30/176 (9 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel
> 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #4 is the last bus
> bios0: ROM list: 0xc0000/0xe000 0xce000/0x1000
> 0xe0000/0x10000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no
> bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82845 Host"
> rev 0x04
> ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev
> 0x04
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility
> M7 LW" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100
> emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100
> emulation)
> uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM
> USB" rev 0x02: irq 9
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM
> Hub-to-PCI" rev 0x42
> pci2 at ppb1 bus 2
> cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus"
> rev 0x80: irq 9
> cbb1 at pci2 dev 0 function 1 "Ricoh 5C476 CardBus"
> rev 0x80: irq 9
> "AT&T/Lucent LTMODEM" rev 0x02 at pci2 dev 1
> function 0 not configured
> rl0 at pci2 dev 2 function 0 "Realtek 8139" rev
> 0x10: irq 9 address
> 00:80:45:22:bf:fd
> rlphy0 at rl0 phy 0: RTL internal phy
> "Aironet MPI-350 Wireless" rev 0x00 at pci2 dev 3
> function 0 not configured
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0,
> lattimer 0x40
> pcmcia0 at cardslot0
> cardslot1 at cbb1 slot 1 flags 0
> cardbus1 at cardslot1: bus 4 device 0 cacheline 0x0,
> lattimer 0x40
> pcmcia1 at cardslot1
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM
> LPC" rev 0x02: SpeedStep
> pciide0 at pci0 dev 31 function 1 "Intel 82801CAM
> IDE" rev 0x02: DMA,
> channel 0 configur
> ed to compatibility, channel 1 configured to
> compatibility
> wd0 at pciide0 channel 0 drive 0: <IC25N030ATMR04-0>
> wd0: 16-sector PIO, LBA48, 28615MB, 58605120 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA720
> DVD/CDRW, 1.00> SCSI0
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> "Intel 82801CA/CAM SMBus" rev 0x02 at pci0 dev 31
> function 3 not configured
> auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM
> AC97" rev 0x02:
> irq 9, ICH3 AC97
> ac97: codec id 0x83847656 (SigmaTel STAC9756/57)
> ac97: codec features 18 bit DAC, 18 bit ADC,
> SigmaTel 3D
> audio0 at auich0
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte
> fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask ef6d netmask ef6d ttymask ffef
> pctr: user-level cycle counter enabled
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
>
> --
> The only way to keep your health is to eat what you
> don't want, drink
> what you don't like, and do what you'd rather not.
> - Mark Twain
