On 2012-05-15, Brad Smith <b...@comstyle.com> wrote:
> http://marc.info/?l=openbsd-tech&m=133160147815932&w=2
No negative impact on bge(4) BCM5704C. Jumbos worked before, tested rx
and tx, and still work afterwards.
OpenBSD 5.1-current (GENERIC.MP) #17: Wed May 16 19:42:42 BST 2012
st...@symphytum.spacehopper.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1072627712 (1022MB)
avail mem = 1021775872 (974MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf8dc0 (60 entries)
bios0: vendor American Megatrends Inc. version "080011" date 11/17/2005
bios0: Supermicro H8SSL
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S5
acpi0: tables DSDT FACP APIC OEMB
acpi0: wakeup devices P1P2(S1) USB0(S1) USB1(S1) USB2(S1) PS2K(S1) PS2M(S1)
SLPB(S1)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Opteron(tm) Processor 146, 1995.26 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: AMD erratum 89 present, BIOS upgrade may be required
cpu0: apic clock running at 199MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0: apid 2 pa 0xfec01000, version 11, 16 pins
ioapic2 at mainbus0: apid 3 pa 0xfec02000, version 11, 16 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus 2 (P1P2)
acpicpu0 at acpi0
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
pci0 at mainbus0 bus 0
ppb0 at pci0 dev 1 function 0 "ServerWorks HT-1000 PCI" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 13 function 0 "ServerWorks HT-1000 PCIX" rev 0xb2
pci2 at ppb1 bus 2
em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82546EB)" rev 0x01: apic 2 int
4, address 00:11:0a:59:5a:64
em1 at pci2 dev 1 function 1 "Intel PRO/1000MT (82546EB)" rev 0x01: apic 2 int
5, address 00:11:0a:59:5a:65
bge0 at pci2 dev 3 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): apic 2 int 8, address 00:30:48:56:6b:76
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 3 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): apic 2 int 9, address 00:30:48:56:6b:77
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
piixpm0 at pci0 dev 2 function 0 "ServerWorks HT-1000" rev 0x00: polling
disabled
pciide0 at pci0 dev 2 function 1 "ServerWorks HT-1000 IDE" rev 0x00: DMA
wd0 at pciide0 channel 0 drive 0: <InnoDisk Corp. - EDC4000 1GB>
wd0: 2-sector PIO, LBA, 999MB, 2047248 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pcib0 at pci0 dev 2 function 2 "ServerWorks HT-1000 LPC" rev 0x00
ohci0 at pci0 dev 3 function 0 "ServerWorks HT-1000 USB" rev 0x01: apic 1 int
10, version 1.0, legacy support
ohci1 at pci0 dev 3 function 1 "ServerWorks HT-1000 USB" rev 0x01: apic 1 int
10, version 1.0, legacy support
ehci0 at pci0 dev 3 function 2 "ServerWorks HT-1000 USB" rev 0x01: apic 1 int 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ServerWorks EHCI root hub" rev 2.00/1.00 addr 1
vga1 at pci0 dev 5 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 2 configuration 1 interface 0 " USB Keyboard" rev
1.10/3.10 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 1 " USB Keyboard" rev
1.10/3.10 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (00dcccfbf24041ba.a) swap on wd0b dump on wd0b
