On 2012-05-10, Predrag Punosevac <punoseva...@gmail.com> wrote:
> I would like to hear opinion about:
>
> Dell PowerEdge R210 II Ultra-compact Rack Server
These work fine, quite nice machines.
> I am looking at the one with
>
> Intel Gigabit ET Quad Port Adapter, Gigabit Ethernet NIC, PCIe x4
I think these are 82576, no personal experience with these (I have
usually got second-hand older cards when I've needed multi-port
nics), they are listed as supported by em(4), should be alright
but they would be better supported by a different driver which
might happen sometime.
> Does One Dual port Broadcom BCM 5716 work on OpenBSD?
> What about those Broadcom NetXtremes ? It is not going to
> have RAID controller. We are looking at the one with Dual-core Intel
> Celeron G400 and G500 series
The onboard BCM 5716 a.k.a. NetXtreme II work fine with bnx(4).
I include a dmesg from one with PERC H200 raid controller and a
Xeon E3 (note that this Xeon E3 cpu has the instructions that can
be used to speed up AES, see "AES" in the cpu0 attach line,
the core i3/celerons don't have this - might not be important
for you but I thought I'd point it out just in case).
Note the cheaper DRACs with shared network port are not supported by
OpenBSD, I believe the enterprise DRAC with a separate port should work
but I haven't used one myself (I usually prefer a standalone remote
power controller and cereal console).
OpenBSD 5.1 (GENERIC.MP) #207: Sun Feb 12 09:42:14 MST 2012
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 4283691008 (4085MB)
avail mem = 4155494400 (3962MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6730 (57 entries)
bios0: vendor Dell Inc. version "1.2.3" date 07/21/2011
bios0: Dell Inc. PowerEdge R210 II
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP SPMI ASF! HPET APIC MCFG BOOT SSDT SSDT ASPT SSDT SSDT
HEST ERST BERT EINJ
acpi0: wakeup devices P0P1(S4) GLAN(S0) EHC1(S4) EHC2(S4) PXSX(S4) RP01(S5)
PXSX(S4) RP02(S5) PXSX(S4) RP03(S5) PXSX(S4) RP04(S5) PXSX(S4) RP05(S5)
PXSX(S4) RP06(S5) PXSX(S4) RP07(S5) PXSX(S4) RP08(S5) PEG0(S5) PEGP(S5)
PEG1(S5) PEG2(S5) PEG3(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz, 3100.44 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE,AVX,NXE,LONG,LAHF
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 100MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz, 3100.02 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE,AVX,NXE,LONG,LAHF
cpu1: 256KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz, 3100.02 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE,AVX,NXE,LONG,LAHF
cpu2: 256KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz, 3100.02 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,XSAVE,AVX,NXE,LONG,LAHF
cpu3: 256KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P0P1)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus 1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpicpu2 at acpi0: C3, C2, C1, PSS
acpicpu3 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: FN00
acpipwrres1 at acpi0: FN01
acpipwrres2 at acpi0: FN02
acpipwrres3 at acpi0: FN03
acpipwrres4 at acpi0: FN04
acpitz0 at acpi0: critical temperature is 100 degC
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca8/8 spacing 4
cpu0: Enhanced SpeedStep 3100 MHz: speeds: 3101, 3100, 2600, 2400, 2200, 2000,
1800, 1600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: msi
pci1 at ppb0 bus 1
mpii0 at pci1 dev 0 function 0 "Symbios Logic SAS2008" rev 0x03: msi
scsibus0 at mpii0: 42 targets
sd0 at scsibus0 targ 1 lun 0: <Dell, Virtual Disk, 1028> SCSI4 0/direct fixed
naa.600508e000000000b4d6e0b5b2653b06
sd0: 237824MB, 512 bytes/sector, 487063552 sectors
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 0 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 2
bnx0 at pci2 dev 0 function 0 "Broadcom BCM5716" rev 0x20: apic 0 int 16
bnx1 at pci2 dev 0 function 1 "Broadcom BCM5716" rev 0x20: apic 0 int 17
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 0 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa4
pci3 at ppb2 bus 3
vga1 at pci3 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel C202 LPC" rev 0x04
pciide0 at pci0 dev 31 function 2 "Intel 6 Series SATA" rev 0x04: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 0 int 19 for native-PCI interrupt
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 0 int 19
iic0 at ichiic0
iic0: skipping sensors to avoid ipmi0 interactions
pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x04: DMA, channel
0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 0 int 21 for native-PCI interrupt
atapiscsi0 at pciide1 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-L633J, D150> ATAPI 5/cdrom
removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
kbc: cmd word write error
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhub4 at uhub3 port 5 "Standard Microsystems product 0x2514" rev 2.00/0.00 addr
3
uhidev0 at uhub4 port 2 configuration 1 interface 0 "BTC USB Multimedia
Keyboard" rev 1.10/4.00 addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub4 port 2 configuration 1 interface 1 "BTC USB Multimedia
Keyboard" rev 1.10/4.00 addr 4
uhidev1: iclass 3/1, 2 report ids
uhid0 at uhidev1 reportid 1: input=3, output=1, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (f2a10762c309ec77.a) swap on sd0b dump on sd0b
the observant might notice I enabled ipmi sensors on this, works fine on this
machine..
hw.sensors.cpu0.temp0=45.00 degC
hw.sensors.cpu1.temp0=45.00 degC
hw.sensors.cpu2.temp0=45.00 degC
hw.sensors.cpu3.temp0=45.00 degC
hw.sensors.acpitz0.temp0=29.80 degC (zone temperature)
hw.sensors.mpii0.drive0=online (sd0), OK
hw.sensors.ipmi0.temp0=-49.00 degC (Temp), OK
hw.sensors.ipmi0.temp1=25.00 degC (Ambient Temp), OK
hw.sensors.ipmi0.temp2=27.00 degC (Planar Temp), OK
hw.sensors.ipmi0.temp3=28.00 degC (Temp), OK
hw.sensors.ipmi0.fan0=4080 RPM (FAN 1 RPM), OK
hw.sensors.ipmi0.fan1=3960 RPM (FAN 2 RPM), OK
hw.sensors.ipmi0.fan2=4080 RPM (FAN 3 RPM), OK
hw.sensors.ipmi0.indicator0=Off (Intrusion), OK
