On Sat, May 5, 2012 at 7:44 PM, Martijn Rijkeboer <mart...@bunix.org> wrote:
> Hi,
>
> When booting GENERIC.MP on Xen I get the following page fault trap:
>
> B root on wd0a (6412ffe6504713d5.a) swap on wd0b dump on wd0b
> B clock: unknown CMOS layout
> B kernel: page fault trap, code = 0
> B Stopped at B B trap+0x6a: B B movq B B %r13,0x1f0(%r14)
> B ddb{1}>
>
> When booting GENERIC all works fine. Below are the specs, sysctl hw, trace,
> ps and dmesg. Any suggestions?
Like http://marc.info/?l=openbsd-misc&m=133612760603867&w=2 ?
>
>
> # OS
>
> OpenBSD 5.1-RELEASE, AMD64
>
>
> # Xen
>
> XenServer 5.6 Service Pack 2, Build 47101p
>
>
> # sysctl hw
>
> hw.machine=amd64
> hw.model=Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz
> hw.ncpu=1
> hw.byteorder=1234
> hw.pagesize=4096
> hw.disknames=wd0:6412ffe6504713d5,cd0:,fd0:,fd1:
> hw.diskcount=4
> hw.cpuspeed=2133
> hw.vendor=Xen
> hw.product=HVM domU
> hw.version=3.4.2
> hw.serialno=6d00c118-f807-8694-d16c-cd186dcb9538
> hw.uuid=6d00c118-f807-8694-d16c-cd186dcb9538
> hw.physmem=1068498944
> hw.usermem=1068486656
> hw.ncpufound=2
> hw.allowpowerdown=1
>
>
> # trace
>
> ddb{1}> trace
> trap() at trap+0x6a
> --- trap (number 13) ---
> mpidle() at 0
> cpu_spinup_trampoline_end() at cpu_spinup_trampoline_end+0x67
> end trace frame: 0x0, count: -3
>
>
> # ps
>
> ddb{1}> ps
> B PID B PPID B PGRP B B UID B S B B B FLAGS B WAIT B B B
B COMMAND
> B B 13 B B B 0 B B B 0 B B B 0 B 3 B B 0x100200 B aiodoned B
B aiodoned
> B B 12 B B B 0 B B B 0 B B B 0 B 3 B B 0x100200 B syncer B B
B update
> B B 11 B B B 0 B B B 0 B B B 0 B 3 B B 0x100200 B cleaner B B
cleaner
> B B 10 B B B 0 B B B 0 B B B 0 B 3 B B 0x100200 B reaper B B
B reaper
> B B 9 B B B 0 B B B 0 B B B 0 B 3 B B 0x100200 B pgdaemon B
B pagedaemon
> B B 8 B B B 0 B B B 0 B B B 0 B 3 B B 0x100200 B bored B B B
crypto
> B B 7 B B B 0 B B B 0 B B B 0 B 3 B B 0x100200 B pftm B B B
B pfpruge
> B B 6 B B B 0 B B B 0 B B B 0 B 3 B B 0x100200 B usbtsk B B
B usbtask
> B B 5 B B B 0 B B B 0 B B B 0 B 3 B B 0x100200 B usbatsk B B
usbatsk
> B B 4 B B B 0 B B B 0 B B B 0 B 3 B 0x40100200 B B B B B B
B idle1
> B B 3 B B B 0 B B B 0 B B B 0 B 3 B B 0x100200 B bored B B B
syswq
> B B 2 B B B 0 B B B 0 B B B 0 B 7 B 0x40100200 B B B B B B
B idle0
> B B 1 B B B 0 B B B 0 B B B 0 B 3 B B B B B 0 B biowait B B
swapper
> B B 0 B B -1 B B B 0 B B B 0 B 3 B B B 0x200 B scheduler B
swapper
>
>
> # dmesg (GENERIC)
>
> OpenBSD 5.1 (GENERIC) #181: Sun Feb 12 09:35:53 MST 2012
> B B dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
> real mem = 1068498944 (1019MB)
> avail mem = 1025982464 (978MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xeb01f (12 entries)
> bios0: vendor Xen version "3.4.2" date 03/25/2011
> bios0: Xen HVM domU
> acpi0 at bios0: rev 2, ACPI control unavailable
> mpbios0 at bios0: Intel MP Specification 1.4
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz, 2133.68 MHz
> cpu0:
>
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,MMX,
FXSR,SSE,SSE2,SSE3,SSSE3,CX16,LONG,LAHF
> cpu0: 4MB 64b/line 16-way L2 cache
> cpu0: apic clock running at 100MHz
> cpu at mainbus0: not configured
> mpbios0: bus 0 is type ISA
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 48 pins
> ioapic0: misconfigured as apic 0, remapped to apid 1
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
> pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
> pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK>
> wd0: 16-sector PIO, LBA48, 40960MB, 83886080 sectors
> wd0(pciide0:0:0): using PIO mode 0, DMA mode 2
> atapiscsi0 at pciide0 channel 1 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.10> ATAPI 5/cdrom
> removable
> cd0(pciide0:1:1): using PIO mode 0
> uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 1 int 5
> piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x01: SMBus
> disabled
> vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> "XenSource Platform Device" rev 0x01 at pci0 dev 3 function 0 not
configured
> em0 at pci0 dev 4 function 0 "Intel PRO/1000MT (82540EM)" rev 0x03: apic 1
> int 5, address 00:11:11:f8:51:c3
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: probed fifo depth: 0 bytes
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: density unknown
> fd1 at fdc0 drive 1: density unknown
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> nvram: invalid checksum
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub0 port 2 configuration 1 interface 0 "QEMU 0.10.2 QEMU USB
> Tablet" rev 1.00/0.00 addr 2
> uhidev0: iclass 3/1
> uhid0 at uhidev0: input=6, output=0, feature=0
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> root on wd0a (6412ffe6504713d5.a) swap on wd0b dump on wd0b
> clock: unknown CMOS layout
>
>
> Kind regards,
>
>
> Martijn Rijkeboer
