Below is the dmesg for an HP Pavilion dv6000, specifically dv6433cl. The only
issue I am having is using the system bell. IOW, printf "\a" doesn't produce a
bell. I read wskbd(4) and pckbd(4) and if IIUC this may not be implemented. I
tried to fiddle with wsconsctl with no success, and have included its output
at the bottom as well.
OpenBSD 5.0 (GENERIC.MP) #63: Wed Aug 17 10:14:30 MDT 2011
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1062666240 (1013MB)
avail mem = 1020313600 (973MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xdf010 (22 entries)
bios0: vendor Hewlett-Packard version "F.29" date 11/13/2007
bios0: Hewlett-Packard HP Pavilion dv6000 (GL995UA#ABA)
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC HPET MCFG TCPA APIC BOOT SLIC SSDT SSDT SSDT SSDT
acpi0: wakeup devices RP02(S3) PXS3(S4) LANC(S4) PS2K(S3) PS2M(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 CPU T5300 @ 1.73GHz, 1729.80 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU T5300 @ 1.73GHz, 1729.52 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEGP)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 3 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus 5 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 110 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "Primary" serial type LION oem "Hewlett-Packard"
acpibtn2 at acpi0: LID_
acpivideo0 at acpi0: VGA_
acpivideo1 at acpi0: GFX0
acpivout0 at acpivideo1: DD04
cpu0: Enhanced SpeedStep 1729 MHz: speeds: 1733, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Conexant CX20549
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: msi
pci1 at ppb0 bus 2
wpi0 at pci1 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, MoW1,
address 00:1b:77:9b:cf:90
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: msi
pci2 at ppb1 bus 3
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 5
"Ricoh 5C832 Firewire" rev 0x00 at pci3 dev 5 function 0 not configured
sdhc0 at pci3 dev 5 function 1 "Ricoh 5C822 SD/MMC" rev 0x19: apic 1 int 17
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x01 at pci3 dev 5 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x0a at pci3 dev 5 function 3 not configured
"Ricoh 5C852 xD" rev 0x05 at pci3 dev 5 function 4 not configured
fxp0 at pci3 dev 8 function 0 "Intel PRO/100 VM" rev 0x02, i82562: apic 1 int
20, address 00:1b:24:80:ae:64
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CD/DVDW TS-L632M, 0A17> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1
ahci0: PHY offline on port 2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, FUJITSU MHW2160B, 891F> SCSI3 0/direct
fixed naa.500000e04066398f
sd0: 152627MB, 512 bytes/sector, 312581808 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 4 configuration 1 interface 0 "Sonix Technology Co., Ltd.
USB 2.0 Camera" rev 2.00/2.10 addr 2
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (1c1363bf9d112a53.a) swap on sd0b dump on sd0b
hw.sensors.cpu0.temp0=61.00 degC
hw.sensors.cpu1.temp0=61.00 degC
hw.sensors.acpitz0.temp0=50.00 degC (zone temperature)
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.acpibat0.volt0=14.80 VDC (voltage)
hw.sensors.acpibat0.volt1=12.40 VDC (current voltage)
hw.sensors.acpibat0.amphour0=4.03 Ah (last full capacity)
hw.sensors.acpibat0.amphour1=0.21 Ah (warning capacity)
hw.sensors.acpibat0.amphour2=0.12 Ah (low capacity)
hw.sensors.acpibat0.amphour3=4.03 Ah (remaining capacity), OK
hw.sensors.acpibat0.raw0=0 (battery full), OK
hw.sensors.acpibat0.raw1=unknown (rate), UNKNOWN
wsconsctl: Use explicit arg to view keyboard.map.
keyboard.type=pc-xt
keyboard.bell.pitch=400
keyboard.bell.period=100
keyboard.bell.volume=50
keyboard.bell.pitch.default=400
keyboard.bell.period.default=100
keyboard.bell.volume.default=50
keyboard.repeat.del1=400
keyboard.repeat.deln=100
keyboard.repeat.del1.default=400
keyboard.repeat.deln.default=100
keyboard.ledstate=0
keyboard.encoding=us
mouse.type=ps2
display.type=vga-pci
display.emulations=vt100
display.screentypes=80x25,80x25bf,80x40,80x40bf,80x50,80x50bf
display.focus=2
display.brightness=100.00%
display.screen_on=250
display.screen_off=300000
display.vblank=on
display.kbdact=off
display.msact=off
display.outact=off
