I think this is enough to file a Problem Report, could you please do that?
Read sendbug(1) and http://www.openbsd.org/report.html if unsure.
I have a DL380 G3 which shows the same "ciss0: cmd_stat 2 scsi_stat 0x0"
messages so chances are mine's affected as well, I'll try to load it a bit
and see what happens.
Regards
Johan M:son
On Tuesday 01 November 2005 18.18, you wrote:
> I installed a snapshot on an HP Proliant DL360, and everything seems
> fine except that disk performance is terrible. Just running bonnie++
> for a quick test it can only do 8MB/s write because its using 100% of
> the CPU. Top shows its all being spent in system time. For contrast,
> my slow laptop ATA drive does 14MB/s at 3% CPU usage.
>
> Adam
>
> OpenBSD 3.8-current (GENERIC) #169: Sun Oct 2 15:06:50 MDT 2005
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel" 686-class) 3.07 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,A
>CPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT- ID real mem = 2147041280
> (2096720K) avail mem = 1953218560 (1907440K) using 4278 buffers containing
> 107454464 bytes (104936K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @
> 0xf0000 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
> pcibios0: PCI BIOS has 7 Interrupt Routing table entries
> pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks CSB5
> SouthBridge" rev 0x00) pcibios0: PCI bus #0 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xcc000/0x1800
> 0xee000/0x2000! cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE" rev 0x31
> pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE" rev 0x00
> pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE" rev 0x00
> pci1 at pchb2 bus 1
> bge0 at pci1 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5703 A2
> (0x1002): irq 11 address 00:0b:cd:d1:2a:c7 brgphy0 at bge0 phy 1:
> BCM5703 10/100/1000baseT PHY, rev. 2 vga1 at pci0 dev 3 function 0 "ATI
> Rage XL" rev 0x27 wsdisplay0 at vga1 mux 1: console (80x25, vt100
> emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ciss0 at pci0 dev 4 function 0 "Compaq Smart Array 5i/532 rev.2" rev
> 0x01: irq 3 ciss0: 1 LD HW rev 1 FW 2.38/2.38
> lmap 40000000:0 scsibus0 at ciss0: 1 targets
> sd0 at scsibus0 targ 0 lun 0: <COMPAQ, LOGICAL VOLUME, 2.38> SCSI0 0/
> direct fixed ciss0: cmd_stat 2 scsi_stat 0x0
> ciss0: cmd_stat 2 scsi_stat 0x0
> sd0: 69459MB, 69459 cyl, 64 head, 32 sec, 512 bytes/sec, 142253280 sec
> total vendor "Compaq", unknown product 0xb203 (class system subclass
> miscellaneous, rev 0x01) at pci0 dev 5 function 0 not configured vendor
> "Compaq", unknown product 0xb204 (class system subclass miscellaneous,
> rev 0x01) at pci0 dev 5 function 2 not configured pcib0 at pci0 dev 15
> function 0 "ServerWorks CSB5 SouthBridge" rev 0x93 pciide0 at pci0 dev
> 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA atapiscsi0 at
> pciide0 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at
> scsibus1 targ 0 lun 0: <COMPAQ, CRN-8245B, 2.19> SCSI0 5/cdrom
> removable cd0(pciide0:0:0): using PIO mode 4, DMA mode 2 pchb3 at pci0
> dev 15 function 3 "ServerWorks CSB5 PCI" rev 0x00 pchb4 at pci0 dev 17
> function 0 "ServerWorks CIOBX2" rev 0x05 pchb5 at pci0 dev 17 function
> 2 "ServerWorks CIOBX2" rev 0x05 pci2 at pchb5 bus 4
> bge1 at pci2 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5703 A2
> (0x1002): irq 10 address 00:0b:cd:d1:2a:c6 brgphy1 at bge1 phy 1:
> BCM5703 10/100/1000baseT PHY, rev. 2 isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> sysbeep0 at pcppi0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask e3ed netmask efed ttymask ffef
> pctr: user-level cycle counter enabled
> ciss0: cmd_stat 2 scsi_stat 0x0
> ciss0: cmd_stat 2 scsi_stat 0x0
> dkcsum: sd0 matches BIOS drive 0x80
> root on sd0a
> ciss0: cmd_stat 2 scsi_stat 0x0
> ciss0: cmd_stat 2 scsi_stat 0x0
> ciss0: cmd_stat 2 scsi_stat 0x0
> ciss0: cmd_stat 2 scsi_stat 0x0
> rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
> ciss0: cmd_stat 2 scsi_stat 0x0
> ciss0: cmd_stat 2 scsi_stat 0x0
> ciss0: cmd_stat 2 scsi_stat 0x0
> ciss0: cmd_stat 2 scsi_stat 0x0
>
>
> !DSPAM:4367aa85188902939917969!
