-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Today Greg Thomas contributed the following:
On 11/1/05, Denny White <[EMAIL PROTECTED]> wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I'd like to be able to use just mail instead of the system
MUA for one user who doesn't have an email account setup with
the ISP, but who just wants to be able send email messages
to other users on the network. So far, the messages keep getting
"MDeferred: Connection refused by ....". I added the network
name, and later, when that didn't work, the IP address also, to
/etc/mail/access, along with OK for local but not relay, rebuilt
database by "makemap hash /etc/mail/access < /etc/mail/access",
but the mail messages are still refused. I can ssh/scp between
all the computers on the network. Also no problems with NFS. Use
it regularly from an XP box and and the other BSD computers on
the network. I had just started running pf on the box that's
refusing the messages, but disabled it and restarted, but it
didn't help. I don't know if it's pertinent to the problem,
but I'm running current, now on the 4th system build. Didn't
put dmesg in this message for sake of brevity, and because there
was nothing abnormal in it after the last cvsup and build. But,
if it's needed, please advise, and I'll do it. According to
/usr/ports/infrastructure/build/out-of-date, all ports are up
to date, too. Thanks for any help on this.
Denny White
Perhaps the sendmail section of the afterboot manpage is relevant? You're
lacking quite a bit of info so we can only guess. Are the other users
running OpenBSD? Sendmail? Default OpenBSD Sendmail config?
Greg
Okay, thanks for the advice. I've already checked the README and
must've missed the default accept policy part. Checked the other
reference and saw it immediately. I'll try to figure out how to
do it. I've fooled around with sendmail on a FreeBSD box when I
was installing a virus program for checking email. It is, in fact,
the box that's trying to send the messages to this one, which is
running OpenBSD current with the sendmail default install. Thanks
for the pointers. Putting dmesg below in case needed. And the
FreeBSD box is still using default sendmail install too.
Denny White
OpenBSD 3.8-current (GENERIC) #4: Mon Oct 31 01:54:48 CST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 601 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 267952128 (261672K)
avail mem = 237645824 (232076K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(a7) BIOS, date 01/31/02, BIOS32 rev. 0 @ 0xfb4f0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb970
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdd90/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 5 9 10 11
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT82C691 PCI" rev 0xc4
ppb0 at pci0 dev 1 function 0 "VIA VT82C598 AGP" rev 0x00
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 "VIA VT82C686 ISA" rev 0x22
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x10: ATA66, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD300BB-00AUA1>
wd0: 16-sector PIO, LBA, 28629MB, 58633344 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HP, CD-Writer+ 9500b, 1.06> SCSI0 5/cdrom
removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <ASUS, CD-S500/A, 1.0K> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x10: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3 "VIA VT83C572 USB" rev 0x10: irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
viaenv0 at pci0 dev 7 function 4 "VIA VT82C686 SMBus" rev 0x30
auvia0 at pci0 dev 7 function 5 "VIA VT82C686 AC97" rev 0x20: irq 5
ac97: codec id 0x83847644 (SigmaTel STAC9744/45)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at auvia0
fxp0 at pci0 dev 13 function 0 "Intel 82557" rev 0x08, i82559: irq 11, address
00:d0:b7:ba:15:09
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
vga1 at pci0 dev 15 function 0 "3DFX Interactive Voodoo3" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask e745 netmask ef45 ttymask ffc7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
GnuPG key : 0x1644E79A | http://wwwkeys.nl.pgp.net
Fingerprint: D0A9 AD44 1F10 E09E 0E67 EC25 CB44 F2E5 1644 E79A
iD8DBQFDZ8WQy0Ty5RZE55oRAvVhAKCLXoX85ZD3LmivSCp36HEWhYlqVgCcDxWw
TgYgGyl4uTcCp52NVaKPUXs=
=APHC
-----END PGP SIGNATURE-----
