Hi Stuart.
> do you know which device you have?
This is what I get on the console:
pgt0 at cardbus0 dev 0 function 0 "Intersil Prism GT/Duette" rev 0x01: irq 11
According to the meagre research I've done it's a 3880 chipset.
The card is an SMC2835W ...
> In theory dmesg should be able to pick up the message buffer from that
> dump, see the options in dmesg(8).
Cheers.
I think this is right:
cbb0: <rbus> no bus space
panic: io alloc
Stopped at Debugger+0x4: popl %ebp
ddb> PID PPID PGRP UID S FLAGS WAIT COMMAND
3832 1 1 0 3 0x80 nanosleep init
14 0 0 0 3 0x100200 aiodoned aiodoned
13 0 0 0 3 0x100200 syncer update
12 0 0 0 3 0x100200 cleaner cleaner
11 0 0 0 3 0x100200 reaper reaper
10 0 0 0 3 0x100200 pgdaemon pagedaemon
9 0 0 0 3 0x100200 bored crypto
8 0 0 0 3 0x100200 pftm pfpurge
7 0 0 0 3 0x100200 usbtsk usbtask
6 0 0 0 3 0x100200 usbatsk usbatsk
5 0 0 0 3 0x100200 apmev apm0
* 4 0 0 0 7 0x100200 syswq
3 0 0 0 3 0x40100200 idle0
2 0 0 0 3 0x100200 kmalloc kmthread
1 0 1 0 3 0x80 wait init
0 -1 0 0 3 0x200 scheduler swapper
ddb> Debugger(d08cee78,d94fcc88,d097fc1c,d94fcc88,1000) at Debugger+0x4
panic(d097fc1c,d1178ea0,38901270,10,ffffffff) at panic+0x5d
cardbus_read_exrom(d1191c00,0,10,0,0) at cardbus_read_exrom
cardbus_read_tuples(d94fcd94,801,d11c6000,800,0) at cardbus_read_tuples+0x125
cardbus_attach_card(d1191c00,d5600000,d94fcf6c,d03ece07,d0a20ba0) at
cardbus_attach_card+0x58d
cardslot_event(d1191c80,0,d02008c4,d09b3a60,d03e4e40) at cardslot_event+0x11a
workq_thread(d09b3a60) at workq_thread+0x36
Bad frame pointer: 0xd0b8ce38
OpenBSD 5.0 (GENERIC) #43: Wed Aug 17 10:10:52 MDT 2011
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 266 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR
real mem = 301330432 (287MB)
avail mem = 286351360 (273MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/18/99, BIOS32 rev. 0 @ 0xfd820
apm0 at bios0: Power Management spec V1.2
pcibios0 at bios0: rev 2.1 @ 0xfd880/0x800
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf9e10/96 (4 entries)
pcibios0: PCI Exclusive IRQs: 11
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xa000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x02
cbb0 at pci0 dev 2 function 0 "TI PCI1250 CardBus" rev 0x02: irq 11
cbb1 at pci0 dev 2 function 1 "TI PCI1250 CardBus" rev 0x02: irq 11
vga1 at pci0 dev 3 function 0 "Neomagic Magicgraph NM2160" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x01
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23EA-60>
wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-1702BC, 1564> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x01: SMI
iic0 at piixpm0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
isa0 at piixpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.02
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl at sb0 not configured
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (3091bfdbdeed9cda.a) swap on wd0b dump on wd0b
