On Sun, Feb 19, 2012 at 01:12:13PM +0100, Mike Belopuhov wrote:
> and i forgot to mention that kernel config has to be patched too.
> thanks to shadchin@ for reminding.
It didn't work, here is the dmesg:
[15:19:ttyp0][root@T3:~:5]$ sysctl hw
hw.machine=i386
hw.model=Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class)
hw.ncpu=1
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=wd0:c8fc559b0e991404
hw.diskcount=1
hw.cpuspeed=499
hw.physmem=267976704
hw.usermem=267964416
hw.ncpufound=1
hw.allowpowerdown=1
OpenBSD 5.0 (GENERIC.MP) #0: Mon Feb 20 09:41:29 CET 2012
r...@t3.nmi:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 499
MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX
real mem = 267976704 (255MB)
avail mem = 253517824 (241MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/05/08, BIOS32 rev. 0 @ 0xfd088
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xe0000/0xa800
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x33
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
vr0 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10, address
00:0d:b9:25:8f:ec
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063,
model 0x0034
vr1 at pci0 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 15, address
00:0d:b9:25:8f:ed
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063,
model 0x0034
glxpcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, 32-bit
3579545Hz timer, watchdog, gpio, i2c freq=0x7f
gpio0 at glxpcib0: 32 pins
iic0 at glxpcib0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
glxpcib0: negative ack, flags=0
pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SanDisk SDCFAA-004G>
wd0: 1-sector PIO, LBA48, 3815MB, 7813120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: irq 12, version 1.0,
legacy support
ehci0 at pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 12
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
isa0 at glxpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1
mtrr: K6-family MTRR support (2 registers)
nvram: invalid checksum
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (c8fc559b0e991404.a) swap on wd0b dump on wd0b
clock: unknown CMOS layout
--
Michal Mazurek
