On Sun, Feb 5, 2012 at 11:30 AM, Delan Azabani <de...@azabani.com> wrote: > Hi, I'm trying OpenBSD for the first time, and have experienced issues > getting the installer to boot on my netbook. My netbook is a Toshiba > NB500 (part number PLL50A-00M00D) with an Intel Atom N550 CPU. As it > has no CD drive, I used PXE with the following two files: > > 5.0/amd64/pxeboot > 5.0/amd64/bsd.rd > > When booting the installer, I got a panic. The output visible on my > screen at the time of panic is as follows: > > ======== START OUTPUT ======== > acpiprt3 at acpi0: bus 9 (EXP3) > acpiprt4 at acpi0: bus -1 (EXP4) > acpiprt5 at acpi0: bus 17 (PCIB) > pci0 at mainbus0 bus 0 > bridge mem address conflict 0xf0500000/0x100000 > pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02 > vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x02 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > "Intel Pineview Video" rev 0x02 at pci0 dev 2 function 1 not > configured > "Intel 82801GB HD Audio" rev 0x02 at pci0 dev 27 function 0 not > configured > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: msi > pci1 at ppb0 bus 5 > ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: msi > pci2 at ppb1 bus 7 > athn0 at pci2 dev 0 function 0 "Atheros AR9300" rev 0x01: apic 4 > int 17 > uvm_fault(0xffffffff80bc1970, 0x0, 0, 1) -> e > fatal page fault in supervisor mode > trap type 6 code 0 rip ffffffff8017dfd5 cs 8 rflags 10286 cr2 B 0 cpl > e rsp ffffffff80bf5890 > panic: trap type 6, code=0, pc=ffffffff8017dfd5 > > The operating system has halted. > Please press any key to reboot. > ======== B END OUTPUT B ======== > > As the fault occurred right after the line beginning with "athn0", I > tried booting the installer again, after removing the wireless adapter > (it is Mini PCI Express), and the installer booted perfectly. Here is > some relevant output from the 'lspci' tool under Linux: > > ======== START OUTPUT ======== > 07:00.0 Network controller [0280]: Atheros Communications Inc. AR9300 > Wireless LAN adaptor [168c:0030] (rev 01) > ======== B END OUTPUT B ======== > > I hope that this information is helpful. If you need any more, please > let me know and I will be more than happy to help in any way I can. >
Did you try to boot snapshot already? As with newer HW it's better to try newest system.
