On Tue, Dec 6, 2011 at 11:18 PM, Stefan Johnson <tigerphoenixdra...@gmail.com> wrote: > Hello all. B Today I replaced OpenSuSE with OpenBSD 5.0 on my HP ML 570 G2 > server.
well, you should have searched for "openbsd and PAE" :) i don't think they're going to bother at this point, but don't take my word for it > The system includes to memory boards for RAM. B One board has 8 gigs, and > the other has 4. > The power on self test sees 12 and initializes 12, but after the server > boots, OpenBSD appears > to only see 4. B I believe this relates to 32 vs 64 bit, but I'm not > positive. > > The version I installed was i386, not amd64. B The processors are Xeon MP > 2.2Ghz which only have > 32 bit instruction sets, which is why I chose i386. B Here is a link to the > processor specs that > show this: > http://ark.intel.com/products/27300/Intel-Xeon-Processor-2_20-GHz-2M-Cache-40 0-MHz-FSB > > The FAQ mentions a trick for utilizing more RAM when all of the RAM isn't > seen using boot.conf > at this link: > http://www.openbsd.org/faq/faq4.html#InstProb > However, this is for such a small amount of RAM in the given example, that > I'm not sure this would > work for me. B Can anyone confirm that I'm pretty much stuck with only being > able to utilize 1/3 of > the full potential, or whether the above trick might actually work (using > appropriate size values, of > course)? > > Thanks for any help on this! > > Stefan Johnson > > > > Below is dmesg and sysctl output for my box with the GENERIC MP kernel: > > OpenBSD 5.0 (GENERIC.MP) #59: Wed Aug 17 10:19:44 MDT 2011 > B B dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP > cpu0: Intel(R) Xeon(TM) MP CPU 2.20GHz ("GenuineIntel" 686-class) 2.20 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR > real mem B = 4026036224 (3839MB) > avail mem = 3950120960 (3767MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000, > SMBIOS rev. 2.3 @ 0xec000 (92 entries) > bios0: vendor HP version "P32" date 04/26/2005 > bios0: HP ProLiant ML570 G2 > acpi0 at bios0: rev 0 > acpi0: sleep states S0 S4 S5, can't enable ACPI > mpbios0 at bios0: Intel MP Specification 1.4 > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 99MHz > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Xeon(TM) MP CPU 2.20GHz ("GenuineIntel" 686-class) 2.20 GHz > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Xeon(TM) MP CPU 2.20GHz ("GenuineIntel" 686-class) 2.20 GHz > cpu2: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Xeon(TM) MP CPU 2.20GHz ("GenuineIntel" 686-class) 2.20 GHz > cpu3: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR > mpbios0: bus 0 is type PCI > mpbios0: bus 1 is type PCI > mpbios0: bus 5 is type PCI > mpbios0: bus 9 is type PCI > mpbios0: bus 13 is type PCI > mpbios0: bus 16 is type ISA > ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 11, 16 pins > ioapic1 at mainbus0: apid 9 pa 0xfec01000, version 11, 16 pins > ioapic2 at mainbus0: apid 10 pa 0xfec02000, version 11, 16 pins > ioapic3 at mainbus0: apid 11 pa 0xfec03000, version 11, 16 pins > bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xee000/0x2000! > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "ServerWorks CMIC-HE" rev 0x22 > pchb1 at pci0 dev 0 function 1 "ServerWorks CMIC-HE" rev 0x00 > pci1 at pchb1 bus 1 > ppb0 at pci1 dev 2 function 0 "IBM 133 PCIX-PCIX" rev 0x03 > pci2 at ppb0 bus 2 > ciss0 at pci2 dev 4 function 0 "Compaq Smart Array 64xx" rev 0x01: apic 8 > int 15 > ciss0: 3 LDs, HW rev 1, FW 2.84/2.84, 64bit fifo > scsibus0 at ciss0: 3 targets > sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL VOLUME, 2.84> SCSI2 0/direct > fixed > sd0: 69459MB, 512 bytes/sector, 142253280 sectors > sd1 at scsibus0 targ 1 lun 0: <HP, LOGICAL VOLUME, 2.84> SCSI2 0/direct > fixed > sd1: 70001MB, 512 bytes/sector, 143363040 sectors > sd2 at scsibus0 targ 2 lun 0: <HP, LOGICAL VOLUME, 2.84> SCSI2 0/direct > fixed > sd2: 140006MB, 512 bytes/sector, 286734240 sectors > "Compaq PCI Hotplug" rev 0x14 at pci1 dev 30 function 0 not configured > pchb2 at pci0 dev 0 function 2 "ServerWorks CMIC-HE" rev 0x00 > pci3 at pchb2 bus 9 > "Creative Labs SoundBlaster Audigy LS" rev 0x00 at pci3 dev 1 function 0 > not configured > pchb3 at pci0 dev 0 function 3 "ServerWorks CMIC-HE" rev 0x00 > "Compaq Netelligent ASMC" rev 0x00 at pci0 dev 2 function 0 not configured > fxp0 at pci0 dev 4 function 0 "Intel 8255x" rev 0x08, i82559: apic 8 int > 10, address 00:12:79:cc:74:78 > inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 > piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93: polling > iic0 at piixpm0 > pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <LITE-ON, CD-ROM LTN-487T, 6QG7> ATAPI > 5/cdrom removable > cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 > pciide0: no compatibility interrupt for use by channel 1 > pchb4 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00 > pchb5 at pci0 dev 16 function 0 "ServerWorks CIOB30" rev 0x03 > pchb6 at pci0 dev 16 function 2 "ServerWorks CIOB30" rev 0x03 > pci4 at pchb6 bus 5 > re0 at pci4 dev 2 function 0 "Realtek 8169" rev 0x10: RTL8110S (0x0400), > apic 8 int 11, address 00:22:3f:e8:79:5b > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0 > "Compaq PCI Hotplug" rev 0x14 at pci4 dev 30 function 0 not configured > pchb7 at pci0 dev 17 function 0 "ServerWorks CIOB30" rev 0x03 > pchb8 at pci0 dev 17 function 2 "ServerWorks CIOB30" rev 0x03 > pci5 at pchb8 bus 13 > ppb1 at pci5 dev 1 function 0 "Intel S21152BB PCI-PCI" rev 0x00 > pci6 at ppb1 bus 14 > vga1 at pci6 dev 0 function 0 "ATI Rage XL" rev 0x27 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > "Compaq Netelligent ASMC" rev 0x00 at pci6 dev 1 function 0 not configured > vendor "Compaq", unknown product 0x005a (class memory subclass > miscellaneous, rev 0x00) at pci6 dev 2 function 0 not configured > vendor "Compaq", unknown product 0x00b1 (class memory subclass > miscellaneous, rev 0x01) at pci6 dev 4 function 0 not configured > isa0 at mainbus0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > mtrr: Pentium Pro MTRR support > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (3b06e6767156265a.a) swap on sd0b dump on sd0b > > hw.machine=i386 > hw.model=Intel(R) Xeon(TM) MP CPU 2.20GHz ("GenuineIntel" 686-class) > hw.ncpu=4 > hw.byteorder=1234 > hw.pagesize=4096 > hw.disknames=sd0:3b06e6767156265a,sd1:81b9038bd79d711c,sd2:ba83b2167d3fe073,c d0: > hw.diskcount=4 > hw.cpuspeed=2196 > hw.setperf=100 > hw.vendor=HP > hw.product=ProLiant ML570 G2 > hw.uuid=45413034-4c46-595a-3456-202020202020 > hw.physmem=4026036224 > hw.usermem=4025827328 > hw.ncpufound=4 > hw.allowpowerdown=1
