I need help On Nov 27, 2011 8:58 AM, "Mostaf Faridi" <mostafafar...@gmail.com> wrote:
> I had leased line Before and had NAT server with openBSD and before l > FreeBSD NAT before > On Nov 27, 2011 2:24 AM, "rancor" <theran...@gmail.com> wrote: > >> What do you know? >> Den 26 nov 2011 23:44 skrev "Gholam Mostafa Faridi" < >> mostafafar...@gmail.com>: >> >>> we had Leased line before and we had 27 static IPs before , but our ISP >>> do not support is very well , and we change our ISP and we buy ADSL >>> connection with 10 static IPs , my NAT Server is OpenBSD 5 , before we >>> change our connection type from Leased line to ADSL , we have cisco 800 >>> router and Leased line connect to cisco 800 and after that we connect it to >>> our NAT server , every thing was good and it work like charm , but after >>> change connection type , ISP give us Zyxcel ADSL modem with 10 startic IP , >>> and our IPS do not say what we must do with this ADSL modem and these IPs. >>> we do not know , which mode we must use in ADSL modem , PPoE or bridge ? >>> we do not know use PPoE or Bridge mode with ADSL modem and our ISP do not >>> give us enough information , if I want make NAT server with PF with mode I >>> must set in ADSL modem ? PPoE or bridge ? >>> we do not know how we must config our NAT server , >>> we do not know we need ppp or no ? >>> we do not konw how we must config PF . >>> we have to use 10 static IPs and we can not use one static IP , because >>> of our policy . >>> which options , I must add to my PF.conf
