Baurzhan Muftakhidinov
Since it 's checked with usbdevs . so i think it worked .maybe you could
check more log about the driver
dmesg or /var/log/message like this:
umsm0 at uhub0 port 3 configuration 1 interface 0 "Huawei Technologies HUAWEI
Mobile" rev 2.00/0.00 addr 2
umsm1 at uhub0 port 3 configuration 1 interface 1 "Huawei Technologies HUAWEI
Mobile" rev 2.00/0.00 addr 2
umsm0 at uhub0 port 3 configuration 1 interface 0 "Huawei Technologies HUAWEI
Mobile" rev 2.00/0.00 addr 2
ucom0 at umsm0
umsm1 at uhub0 port 3 configuration 1 interface 1 "Huawei Technologies HUAWEI
Mobile" rev 2.00/0.00 addr 2
ucom1 at umsm1
umsm2 at uhub0 port 3 configuration 1 interface 2 "Huawei Technologies HUAWEI
Mobile" rev 2.00/0.00 addr 2
ucom2 at umsm2
umsm3 at uhub0 port 3 configuration 1 interface 3 "Huawei Technologies HUAWEI
Mobile" rev 2.00/0.00 addr 2
ucom3 at umsm3
umsm4 at uhub0 port 3 configuration 1 interface 4 "Huawei Technologies HUAWEI
Mobile" rev 2.00/0.00 addr 2
umsm5 at uhub0 port 3 configuration 1 interface 5 "Huawei Technologies HUAWEI
Mobile" rev 2.00/0.00 addr 2
the driver is built-in : man umsm
and you should put a SIM Card into the device .and try to dial up into the
Internet with ppp.
the measure works for my USB Huawei mobile wcdma modem.
>Hi all!
>
>I own a Acer Aspire ao532H netbook, and it has
>a Huawei EM770W mobile wcdma modem built-in.
>I think its internally connected via USB. Checked with usbdevs command.
>
>This modem does not work in stock OpenBSD 5.0 since its product ID is not
>listed in /sys/dev/usb/usbdevs, but this modem is supported
>by umsm driver (see below).
>
>Vendor is Huawei (0x12d1), product ID is (0x1404).
>I've added this is to usbdevs file, run make all in /sys/dev/usb
>ant this ID added to usbdevs.h. I also added product ID
>to umsm.c, recompiled and booted new kernel and
>this modem worked just fine.
>
>The modem do not work with DEV_HUAWEI as umsm_flag (see /sys/dev/usb/umsm.c)
>but work with DEV_UMASS5 or 0 as umsm_flag.
>So here are my questions:
>
>1) Maybe someone else also have this modem and can test it;
>2) How to test which value of umsm_flag is correct (DEV_UMASS5 or 0), and
>what it affects to;
>3) Since modem is working, who to ask to add it to umsm driver, should
>I fill bugreport or something?
