Tried to install latest snapshot of 5.0-CURRENT (as Realtek RTL8105E
doesn't work on 4.9) on my Samsung NC-110-A01 laptop with Intel NM10
Express chipset. After successful disk layout and formatting partitions,
during set installation (i/o load on a drive) I've got a lots of
ahci0: read NCQ error page, but not an NCQ error?
messages. i386 snapshot then hangs and reboot, amd64 doesn't hang, but
i/o subsystem works wrong as it wrote inconsistent data to the file
system (got some "Segmentation fault (core dumped)" messages during
normal boot).
Also, when I've tried to install packages after amd64 snapshot
installation, "ahci0: read NCQ error page, but not an NCQ error?"
appeared again.
Linux system (archlinux and xubuntu 10.04) works well on this notebook.
Is it a bug or unsupported chipset or broken hardware or something else?
dmesg (from amd64 system):
OpenBSD 5.0-current (GENERIC.MP) #115: Sun Oct 30 12:32:45 MDT 2011
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1061879808 (1012MB)
avail mem = 1019531264 (972MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xdf010 (29 entries)
bios0: vendor Phoenix Technologies Ltd. version "00VG.M000.20110105.RHU"
date 01/05/2011
bios0: SAMSUNG ELECTRONICS CO., LTD. NC210/NC110
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP MCFG HPET APIC BOOT SLIC SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCIB(S3) PWRB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-16
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz, 1662.73 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: apic clock running at 197MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N455 @ 1.66GHz, 1978.35 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG
cpu1: 512KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (EXP1)
acpiprt2 at acpi0: bus 7 (EXP2)
acpiprt3 at acpi0: bus 9 (EXP3)
acpiprt4 at acpi0: bus 11 (EXP4)
acpiprt5 at acpi0: bus 17 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C1, PSS
acpicpu1 at acpi0: C1, PSS
acpitz0 at acpi0: critical temperature is 98 degC
acpibat0 at acpi0: BAT1 type LION oem "SAMSUNG Electronics"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
acpivideo0 at acpi0: IGD0
acpivout0 at acpivideo0: DD04
cpu0: Enhanced SpeedStep 1978 MHz: speeds: 1667, 1333, 1000 MHz
pci0 at mainbus0 bus 0
mem address conflict 0xf0504000/0x400
mem address conflict 0xf0504400/0x400
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x00
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16
drm0 at inteldrm0
"Intel Pineview Video" rev 0x00 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: msi
pci1 at ppb0 bus 5
"Broadcom BCM4313" rev 0x01 at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: msi
pci2 at ppb1 bus 7
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: msi
pci3 at ppb2 bus 9
re0 at pci3 dev 0 function 0 "Realtek 8101E" rev 0x05: RTL8105E
(0x4080), apic 2 int 18, address e8:11:32:67:79:5a
ukphy0 at re0 phy 7: Generic IEEE 802.3u media interface, rev. 2: OUI
0x000732, model 0x0008
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: msi
pci4 at ppb3 bus 11
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 17
pcib0 at pci0 dev 31 function 0 "Intel Tigerpoint LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x02: msi, AHCI 1.1
ahci0: PHY offline on port 2
ahci0: PHY offline on port 3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS54322, ESBO> SCSI3
0/direct fixed naa.5000cca68fc9584b
sd0: 238475MB, 512 bytes/sector, 488397168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2
int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR3 SDRAM PC3-8500 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Image Processor
WebCam SCB-0385N" rev 2.00/0.07 addr 2
video0 at uvideo0
ugen0 at uhub2 port 2 "Broadcom Corp Broadcom BCM2070 Bluetooth Device"
rev 2.00/6.28 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (ca1d83c1dd24491c.a) swap on sd0b dump on sd0b
ahci0: read NCQ error page, but not an NCQ error?
ahci0: read NCQ error page, but not an NCQ error?
ahci0: read NCQ error page, but not an NCQ error?
ahci0: read NCQ error page, but not an NCQ error?
ahci0: read NCQ error page, but not an NCQ error?
--
Best regards,
Gennady Kudryashoff.
