Hello,
I just installed a snapshot (dated Oct 19) of -current on a new EeePC
1001PXD. The installation itself went fine. However, on the first boot,
even before I can see the login prompt, acpitz decides to shutdown the
machine:
acpitz0: critical temperature exceeded 255C (5282K), shutting down
Of course, the temperature of the laptop is nowhere near 255C. This
happened with both amd64 and i386. I tried again this morning after
shutting down the laptop last evening, so the temperature should have
been much above 20C. Under Linux, I see the following (temperatures in
milliCelsius):
% uname -or
3.0.0-1-amd64 GNU/Linux
% grep '' /sys/class/thermal/thermal_zone*/*
/sys/class/thermal/thermal_zone0/cdev0_trip_point:1
/sys/class/thermal/thermal_zone0/cdev1_trip_point:1
/sys/class/thermal/thermal_zone0/mode:enabled
/sys/class/thermal/thermal_zone0/temp:50000
/sys/class/thermal/thermal_zone0/trip_point_0_temp:98000
/sys/class/thermal/thermal_zone0/trip_point_0_type:critical
/sys/class/thermal/thermal_zone0/trip_point_1_temp:95000
/sys/class/thermal/thermal_zone0/trip_point_1_type:passive
/sys/class/thermal/thermal_zone0/type:acpitz
And under normal usage, I see the value in thermal_zone0/temp increasing
slowly then decreasing when the fan starts, so I would assume the
hardware is not giving bogus values. I attached the dmesg I get when
booting from bsd.rd.
Any idea?
--
Fred
OpenBSD 5.0-current (RAMDISK_CD) #84: Wed Oct 19 11:53:55 MDT 2011
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 1062797312 (1013MB)
avail mem = 1022722048 (975MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf0760 (31 entries)
bios0: vendor American Megatrends Inc. version "0601" date 02/18/2011
bios0: ASUSTeK Computer INC. 1001PXD
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG ECDT OEMB HPET GSCI SSDT SLIC
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz, 1666.74 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: apic clock running at 166MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 1, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (P0P4)
acpiprt2 at acpi0: bus 2 (P0P5)
acpiprt3 at acpi0: bus -1 (P0P6)
acpiprt4 at acpi0: bus 1 (P0P7)
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x00
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel Pineview Video" rev 0x00 at pci0 dev 2 function 1 not configured
"Intel 82801GB HD Audio" rev 0x02 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: msi
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: msi
pci2 at ppb1 bus 2
vendor "Realtek", unknown product 0x8171 (class network subclass miscellaneous,
rev 0x10) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: msi
pci3 at ppb2 bus 1
alc0 at pci3 dev 0 function 0 "Attansic Technology L2C" rev 0xc1: msi, address
f4:6d:04:1c:50:14
atphy0 at alc0 phy 0: F2 10/100 PHY, rev. 5
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 5
"Intel Tigerpoint LPC" rev 0x02 at pci0 dev 31 function 0 not configured
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x02: msi, AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS54322, ESBO> SCSI3 0/direct
fixed naa.5000cca614d03ffa
sd0: 238475MB, 512 bytes/sector, 488397168 sectors
"Intel 82801GB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
"Azurewave USB2.0 UVC VGA WebCam" rev 2.00/3.22 addr 2 at uhub0 port 6 not
configured
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
