On Sun, Sep 11, 2011 at 10:33 PM, Alexandr Shadchin <alexandr.shadc...@gmail.com> wrote: > On Mon, Sep 12, 2011 at 6:02 AM, patrick keshishian <pkesh...@gmail.com> wrote: >> Hi, >> >> I am guessing this is just a case of user-does-not-know-how-to-configure-things. >> >> I just installed a new snapshot (sep-07); the last snapshot, with >> source builds, I had been running was from a few months back (late >> June-ish). After the install I noticed a few changes with X right >> away. >> >> First thing to notice is that I can't kill X using ctrl+alt+backspace; >> Setting DontZap option explicitly to "false" in xorg.conf doesn't make >> it work either. There was a thread on DontZap stopped working and the >> getting fixed subsequently[1], but maybe it broke again? >> > > Yes, it broke. > >> More importantly (topic), I noticed that my touchpad no longer >> responds. Recalling some changes with this respect on tech@ in the >> past few months I looked at synaptics(4) and tried to add an >> InputDevice section for it. But, I must be doing it wrong. I would >> appreciate a working configuration example or hints with this respect. >> >> I re-read this thread[2] from tech@ and have similar sections in my >> xorg.conf ATM with the touchpad not doing anything. >> > > Try start X without xorg.conf. If the touchpad will work, I will prompt as to > fix xorg.conf. If not, we will look for the cause.
moving xorg.conf away and restarting X didn't make the touchpad work. --patrick >> [1] http://www.mail-archive.com/misc@openbsd.org/msg105042.html >> [2] http://www.mail-archive.com/tech@openbsd.org/msg07094.html >> >> >> >> OpenBSD 5.0-current (GENERIC) #55: Wed Sep 7 20:12:59 MDT 2011 >> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC >> real mem = 1876754432 (1789MB) >> avail mem = 1812762624 (1728MB) >> mainbus0 at root >> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf10d0 (17 entries) >> bios0: vendor Phoenix Technologies LTD version "v1.3201" date 06/18/2009 >> bios0: Gateway LT31 >> acpi0 at bios0: rev 2 >> acpi0: sleep states S0 S3 S4 S5 >> acpi0: tables DSDT FACP APIC MCFG HPET BOOT SLIC >> acpi0: wakeup devices PB5_(S5) OHC1(S3) OHC2(S3) EHCI(S3) HDAU(S3) >> acpitimer0 at acpi0: 3579545 Hz, 32 bits >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> cpu0 at mainbus0: apid 0 (boot processor) >> cpu0: AMD Athlon(tm) Processor L110, 1197.19 MHz >> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,MMX,FXSR,SSE,SSE2,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW >> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB >> 64b/line 16-way L2 cache >> cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative >> cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative >> cpu0: apic clock running at 199MHz >> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 21, 24 pins >> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-8 >> acpihpet0 at acpi0: 14318180 Hz >> acpiprt0 at acpi0: bus 0 (PCI0) >> acpiprt1 at acpi0: bus -1 (PB3_) >> acpiprt2 at acpi0: bus -1 (PB4_) >> acpiprt3 at acpi0: bus 3 (PB5_) >> acpiprt4 at acpi0: bus 4 (PB6_) >> acpiprt5 at acpi0: bus -1 (PB7_) >> acpiprt6 at acpi0: bus 9 (P2P_) >> acpiprt7 at acpi0: bus 1 (AGP_) >> acpiec0 at acpi0 >> acpicpu0 at acpi0: C3, C2 >> acpitz0 at acpi0: critical temperature is 100 degC >> acpiac0 at acpi0: AC unit online >> acpibat0 at acpi0: BAT1 model "UM09B44" serial 210 type LION oem "SONY" >> acpibtn0 at acpi0: LID_ >> acpibtn1 at acpi0: SLPB >> acpibtn2 at acpi0: PWRB >> acpivideo0 at acpi0: VGA_ >> acpivout0 at acpivideo0: LCD_ >> pci0 at mainbus0 bus 0 >> pchb0 at pci0 dev 0 function 0 "ATI RS690 Host" rev 0x00 >> ppb0 at pci0 dev 1 function 0 "ATI RS690 PCIE" rev 0x00 >> pci1 at ppb0 bus 1 >> vga1 at pci1 dev 5 function 0 "ATI Radeon X1250 IGP" rev 0x00 >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >> wsdisplay0: screen 1-5 added (80x25, vt100 emulation) >> ppb1 at pci0 dev 5 function 0 "ATI RS690 PCIE" rev 0x00: msi >> pci2 at ppb1 bus 3 >> re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL >> (0x2480), apic 1 int 17, address 00:23:8b:ef:3a:a7 >> rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1 >> ppb2 at pci0 dev 6 function 0 "ATI RS690 PCIE" rev 0x00: msi >> pci3 at ppb2 bus 4 >> ral0 at pci3 dev 0 function 0 "Ralink RT3090" rev 0x00: apic 1 int 18, >> address 00:24:1d:f4:3d:86 >> ral0: MAC/BBP RT3071 (rev 0x0213), RF RT3020 (MIMO 1T1R) >> ahci0 at pci0 dev 18 function 0 "ATI SB600 SATA" rev 0x00: apic 1 int >> 22, AHCI 1.1 >> scsibus0 at ahci0: 32 targets >> sd0 at scsibus0 targ 0 lun 0: <ATA, TOSHIBA MK2555GS, FG00> SCSI3 >> 0/direct fixed naa.50000391c6887a53 >> sd0: 238475MB, 512 bytes/sector, 488397168 sectors >> ohci0 at pci0 dev 19 function 0 "ATI SB600 USB" rev 0x00: apic 1 int >> 16, version 1.0, legacy support >> ohci1 at pci0 dev 19 function 1 "ATI SB600 USB" rev 0x00: apic 1 int >> 17, version 1.0, legacy support >> ohci2 at pci0 dev 19 function 3 "ATI SB600 USB" rev 0x00: apic 1 int >> 17, version 1.0, legacy support >> ohci3 at pci0 dev 19 function 4 "ATI SB600 USB" rev 0x00: apic 1 int >> 18, version 1.0, legacy support >> ehci0 at pci0 dev 19 function 5 "ATI SB600 USB2" rev 0x00: apic 1 int 19 >> usb0 at ehci0: USB revision 2.0 >> uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 >> piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x14: SMI >> iic0 at piixpm0 >> spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM >> pciide0 at pci0 dev 20 function 1 "ATI SB600 IDE" rev 0x00: DMA, >> channel 0 configured to compatibility, channel 1 configured to >> compatibility >> azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 1 int 16 >> azalia0: codecs: Realtek ALC272 >> audio0 at azalia0 >> pcib0 at pci0 dev 20 function 3 "ATI SB600 ISA" rev 0x00 >> ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00 >> pci4 at ppb3 bus 9 >> pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00 >> pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00 >> pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00 >> kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: >> core rev DH-G2 >> usb1 at ohci0: USB revision 1.0 >> uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1 >> usb2 at ohci1: USB revision 1.0 >> uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1 >> usb3 at ohci2: USB revision 1.0 >> uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 >> usb4 at ohci3: USB revision 1.0 >> uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 >> isa0 at pcib0 >> isadma0 at isa0 >> pckbc0 at isa0 port 0x60/5 >> pckbd0 at pckbc0 (kbd slot) >> pckbc0: using irq 1 for kbd slot >> wskbd0 at pckbd0: console keyboard, using wsdisplay0 >> pms0 at pckbc0 (aux slot) >> pckbc0: using irq 12 for aux slot >> wsmouse0 at pms0 mux 0 >> pms0: Synaptics touchpad, firmware 7.2 >> pcppi0 at isa0 port 0x61 >> spkr0 at pcppi0 >> mtrr: Pentium Pro MTRR support >> uvideo0 at uhub0 port 4 configuration 1 interface 0 "Chicony >> Electronics Co., Ltd. CNF9011" rev 2.00/13.57 addr 2 >> video0 at uvideo0 >> uhidev0 at uhub1 port 1 configuration 1 interface 0 "Microsoft >> Corporation Microsoft \M-. Laser Mouse 6000" rev 2.00/1.01 addr 2 >> uhidev0: iclass 3/1 >> ums0 at uhidev0: 5 buttons, Z dir >> wsmouse1 at ums0 mux 0 >> vscsi0 at root >> scsibus1 at vscsi0: 256 targets >> softraid0 at root >> scsibus2 at softraid0: 256 targets >> root on sd0a (3be80d641a0b9637.a) swap on sd0b dump on sd0b >> >> >> [1512369.911] (--) checkDevMem: using aperture driver /dev/xf86 >> [1512369.930] (--) Using wscons driver on /dev/ttyC4 in pcvt >> compatibility mode (version 3.32) >> [1512371.010] >> X.Org X Server 1.9.5 >> Release Date: 2011-03-17 >> [1512371.010] X Protocol Version 11, Revision 0 >> [1512371.010] Build Operating System: OpenBSD 5.0 amd64 >> [1512371.010] Current Operating System: OpenBSD noir.boxsoft.com 5.0 >> GENERIC#55 amd64 >> [1512371.011] Build Date: 07 September 2011 03:47:25PM >> [1512371.011] >> [1512371.011] Current version of pixman: 0.22.2 >> [1512371.011] Before reporting problems, check http://wiki.x.org >> to make sure that you have the latest version. >> [1512371.011] Markers: (--) probed, (**) from config file, (==) default setting, >> (++) from command line, (!!) notice, (II) informational, >> (WW) warning, (EE) error, (NI) not implemented, (??) unknown. >> [1512371.011] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 11 >> 13:19:23 2011 >> [1512371.011] (==) Using config file: "/etc/X11/xorg.conf" >> [1512371.011] (==) ServerLayout "Layout0" >> [1512371.011] (==) No screen section available. Using defaults. >> [1512371.011] (**) |-->Screen "Default Screen Section" (0) >> [1512371.011] (**) | |-->Monitor "<default monitor>" >> [1512371.012] (==) No monitor specified for screen "Default Screen Section". >> Using a default monitor configuration. >> [1512371.012] (**) |-->Input Device "synapt" >> [1512371.012] (**) |-->Input Device "mouse0" >> [1512371.012] (**) |-->Input Device "w_stylus" >> [1512371.012] (**) |-->Input Device "w_eraser" >> [1512371.012] (**) Option "DontZap" "false" >> [1512371.012] (**) Option "AllowMouseOpenFail" "True" >> [1512371.012] (==) Disabling SIGIO handlers for input devices >> [1512371.012] (==) Automatically adding devices >> [1512371.012] (==) Automatically enabling devices >> [1512371.518] (**) FontPath set to: >> /usr/local/lib/X11/fonts/artwiz-aleczapka/, >> /usr/local/lib/X11/fonts/terminus/, >> /usr/X11R6/lib/X11/fonts/misc/, >> /usr/X11R6/lib/X11/fonts/TTF/, >> /usr/X11R6/lib/X11/fonts/OTF/, >> /usr/X11R6/lib/X11/fonts/Type1/, >> /usr/X11R6/lib/X11/fonts/100dpi/, >> /usr/X11R6/lib/X11/fonts/75dpi/ >> [1512371.518] (==) ModulePath set to "/usr/X11R6/lib/modules" >> [1512371.518] (II) The server relies on wscons to provide the list of >> input devices. >> If no devices become available, reconfigure wscons or disable AutoAddDevices. >> [1512371.518] (WW) AllowEmptyInput is on, devices using drivers 'kbd', >> 'mouse' or 'vmmouse' will be disabled. >> [1512371.518] (WW) Disabling mouse0 >> [1512371.518] (II) Loader magic: 0x7a7aa0 >> [1512371.518] (II) Module ABI versions: >> [1512371.518] X.Org ANSI C Emulation: 0.4 >> [1512371.518] X.Org Video Driver: 8.0 >> [1512371.518] X.Org XInput driver : 11.0 >> [1512371.518] X.Org Server Extension : 4.0 >> [1512371.518] (--) PCI:*(0:1:5:0) 1002:791f:1025:028c rev 0, Mem @ >> 0xd0000000/268435456, 0xf0100000/65536, 0xf0000000/1048576, I/O @ >> 0x00009000/256 >> [1512371.518] (II) LoadModule: "extmod" >> [1512371.555] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so >> [1512371.557] (II) Module extmod: vendor="X.Org Foundation" >> [1512371.557] compiled for 1.9.5, module version = 1.0.0 >> [1512371.557] Module class: X.Org Server Extension >> [1512371.557] ABI class: X.Org Server Extension, version 4.0 >> [1512371.557] (II) Loading extension MIT-SCREEN-SAVER >> [1512371.557] (II) Loading extension XFree86-VidModeExtension >> [1512371.557] (II) Loading extension XFree86-DGA >> [1512371.557] (II) Loading extension DPMS >> [1512371.557] (II) Loading extension XVideo >> [1512371.557] (II) Loading extension XVideo-MotionCompensation >> [1512371.557] (II) Loading extension X-Resource >> [1512371.557] (II) LoadModule: "dbe" >> [1512371.558] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so >> [1512371.560] (II) Module dbe: vendor="X.Org Foundation" >> [1512371.560] compiled for 1.9.5, module version = 1.0.0 >> [1512371.560] Module class: X.Org Server Extension >> [1512371.560] ABI class: X.Org Server Extension, version 4.0 >> [1512371.560] (II) Loading extension DOUBLE-BUFFER >> [1512371.560] (II) LoadModule: "glx" >> [1512371.561] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so >> [1512371.562] (II) Module glx: vendor="X.Org Foundation" >> [1512371.562] compiled for 1.9.5, module version = 1.0.0 >> [1512371.562] ABI class: X.Org Server Extension, version 4.0 >> [1512371.562] (==) AIGLX enabled >> [1512371.563] (II) Loading extension GLX >> [1512371.563] (II) LoadModule: "record" >> [1512371.564] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so >> [1512371.565] (II) Module record: vendor="X.Org Foundation" >> [1512371.565] compiled for 1.9.5, module version = 1.13.0 >> [1512371.565] Module class: X.Org Server Extension >> [1512371.565] ABI class: X.Org Server Extension, version 4.0 >> [1512371.565] (II) Loading extension RECORD >> [1512371.565] (II) LoadModule: "dri" >> [1512371.567] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so >> [1512371.585] (II) Module dri: vendor="X.Org Foundation" >> [1512371.586] compiled for 1.9.5, module version = 1.0.0 >> [1512371.586] ABI class: X.Org Server Extension, version 4.0 >> [1512371.586] (II) Loading extension XFree86-DRI >> [1512371.586] (II) LoadModule: "dri2" >> [1512371.587] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so >> [1512371.588] (II) Module dri2: vendor="X.Org Foundation" >> [1512371.588] compiled for 1.9.5, module version = 1.2.0 >> [1512371.588] ABI class: X.Org Server Extension, version 4.0 >> [1512371.588] (II) Loading extension DRI2 >> [1512371.588] (==) Matched ati as autoconfigured driver 0 >> [1512371.588] (==) Matched vesa as autoconfigured driver 1 >> [1512371.588] (==) Assigned the driver to the xf86ConfigLayout >> [1512371.588] (II) LoadModule: "ati" >> [1512371.589] (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.so >> [1512371.601] (II) Module ati: vendor="X.Org Foundation" >> [1512371.601] compiled for 1.9.5, module version = 6.12.2 >> [1512371.601] Module class: X.Org Video Driver >> [1512371.601] ABI class: X.Org Video Driver, version 8.0 >> [1512371.601] (II) LoadModule: "radeon" >> [1512371.602] (II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.so >> [1512371.617] (II) Module radeon: vendor="X.Org Foundation" >> [1512371.617] compiled for 1.9.5, module version = 6.12.2 >> [1512371.617] Module class: X.Org Video Driver >> [1512371.617] ABI class: X.Org Video Driver, version 8.0 >> [1512371.617] (II) LoadModule: "vesa" >> [1512371.618] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so >> [1512371.632] (II) Module vesa: vendor="X.Org Foundation" >> [1512371.632] compiled for 1.9.5, module version = 2.3.0 >> [1512371.632] Module class: X.Org Video Driver >> [1512371.632] ABI class: X.Org Video Driver, version 8.0 >> [1512371.632] (II) LoadModule: "synaptics" >> [1512371.647] (II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.so >> [1512371.659] (II) Module synaptics: vendor="X.Org Foundation" >> [1512371.659] compiled for 1.9.5, module version = 1.4.99 >> [1512371.659] Module class: X.Org XInput Driver >> [1512371.659] ABI class: X.Org XInput driver, version 11.0 >> [1512371.660] (II) LoadModule: "usbtablet" >> [1512371.662] (II) Loading /usr/X11R6/lib/modules/input/usbtablet_drv.so >> [1512371.673] (II) Module usbtablet: vendor="X.Org Foundation" >> [1512371.673] compiled for 1.9.5, module version = 1.1.0 >> [1512371.673] Module class: X.Org XInput Driver >> [1512371.673] ABI class: X.Org XInput driver, version 11.0 >> [1512371.673] (II) USB Tablet driver >> [1512371.673] (II) RADEON: Driver for ATI Radeon chipsets: >> ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI), >> ATI Radeon Mobility X300 (M24) 3152 (PCIE), >> ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE), >> ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136, >> ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP), >> ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP), >> ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP), >> ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP), >> ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP), >> ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP), >> ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650, >> ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237, >> ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP), >> ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337, >> ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI), >> ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP), >> ATI Radeon X800PRO (R420) JI (AGP), >> ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP), >> ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP), >> ATI Radeon Mobility 9800 (M18) JN (AGP), >> ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP), >> ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP), >> ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP), >> ATI Radeon Mobility M7 LW (AGP), >> ATI Mobility FireGL 7800 M7 LX (AGP), >> ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP), >> ATI FireGL Mobility 9000 (M9) Ld (AGP), >> ATI Radeon Mobility 9000 (M9) Lf (AGP), >> ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP), >> ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP), >> ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP), >> ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP), >> ATI Radeon 9800XT NJ (AGP), >> ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP), >> ATI Radeon Mobility 9600 (M10) NQ (AGP), >> ATI Radeon Mobility 9600 (M11) NR (AGP), >> ATI Radeon Mobility 9600 (M10) NS (AGP), >> ATI FireGL Mobility T2 (M10) NT (AGP), >> ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP), >> ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP), >> ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP), >> ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI), >> ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI), >> ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI), >> ATI Radeon Mobility X300 (M22) 5460 (PCIE), >> ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE), >> ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE), >> ATI Radeon X800PRO (R423) UI (PCIE), >> ATI Radeon X800LE (R423) UJ (PCIE), >> ATI Radeon X800SE (R423) UK (PCIE), >> ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE), >> ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE), >> ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE), >> ATI FireGL unknown (R423) UR (PCIE), >> ATI FireGL unknown (R423) UT (PCIE), >> ATI Mobility FireGL V5000 (M26) (PCIE), >> ATI Mobility FireGL V5000 (M26) (PCIE), >> ATI Mobility Radeon X700 XL (M26) (PCIE), >> ATI Mobility Radeon X700 (M26) (PCIE), >> ATI Mobility Radeon X700 (M26) (PCIE), >> ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834, >> ATI Radeon Mobility 9100 IGP (U3) 5835, >> ATI Radeon XPRESS 200 5954 (PCIE), >> ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP), >> ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP), >> ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI), >> ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE), >> ATI Radeon XPRESS 200M 5975 (PCIE), >> ATI Radeon XPRESS 200 5A41 (PCIE), >> ATI Radeon XPRESS 200M 5A42 (PCIE), >> ATI Radeon XPRESS 200 5A61 (PCIE), >> ATI Radeon XPRESS 200M 5A62 (PCIE), >> ATI Radeon X300 (RV370) 5B60 (PCIE), >> ATI Radeon X600 (RV370) 5B62 (PCIE), >> ATI Radeon X550 (RV370) 5B63 (PCIE), >> ATI FireGL V3100 (RV370) 5B64 (PCIE), >> ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE), >> ATI Radeon Mobility 9200 (M9+) 5C61 (AGP), >> ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), >> ATI Mobility Radeon X800 XT (M28) (PCIE), >> ATI Mobility FireGL V5100 (M28) (PCIE), >> ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE), >> ATI Radeon X850 XT PE (R480) (PCIE), >> ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE), >> ATI unknown Radeon / FireGL (R480) 5D50 (PCIE), >> ATI Radeon X850 XT (R480) (PCIE), >> ATI Radeon X800XT (R423) 5D57 (PCIE), >> ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE), >> ATI Radeon X700 PRO (RV410) (PCIE), >> ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE), >> ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800, >> ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800, >> ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300, >> ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800, >> ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800, >> ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505, >> ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL, >> ATI Mobility Radeon X1400, ATI Radeon X1300/X1550, >> ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300, >> ATI Mobility Radeon X1300, ATI Mobility Radeon X1300, >> ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300, >> ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350, >> ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550, >> ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450, >> ATI Radeon X1300/X1550, ATI Mobility Radeon X2300, >> ATI Mobility Radeon X2300, ATI Mobility Radeon X1350, >> ATI Mobility Radeon X1350, ATI Mobility Radeon X1450, >> ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350, >> ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600, >> ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600, >> ATI Mobility FireGL V5200, ATI Mobility Radeon X1600, >> ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600, >> ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400, >> ATI Mobility FireGL V5250, ATI Mobility Radeon X1700, >> ATI Mobility Radeon X1700 XT, ATI FireGL V5200, >> ATI Mobility Radeon X1700, ATI Radeon X2300HD, >> ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300, >> ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950, >> ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, >> ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, >> ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, >> ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950, >> ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560, >> ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400, >> ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560, >> ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835, >> ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200, >> ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740, >> ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT, >> ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT, >> ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, >> ATI Radeon 4800 Series, ATI Radeon HD 4870 x2, >> ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL), >> ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850, >> ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series, >> ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250, >> ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870, >> ATI Mobility RADEON M98, ATI Radeon 4800 Series, >> ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98, >> ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP), >> ATI RV730XT [Radeon HD 4670], ATI RADEON E4600, >> ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL), >> ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610, >> ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro, >> ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610, >> ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT, >> ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, >> ATI FireMV 2260, ATI RV670, ATI Radeon HD3870, >> ATI Mobility Radeon HD 3850, ATI Radeon HD3850, >> ATI Mobility Radeon HD 3850 X2, ATI RV670, >> ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2, >> ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850, >> ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550, >> ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350, >> ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series, >> ATI Mobility Radeon 4500 Series, ATI RV630, >> ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT, >> ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP, >> ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630, >> ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600, >> ATI FireGL V3600, ATI Radeon HD 2600 LE, >> ATI Mobility FireGL Graphics Processor, ATI Radeon RV710, >> ATI Radeon HD 3470, ATI Mobility Radeon HD 3430, >> ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450, >> ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450, >> ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260, >> ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP, >> ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT, >> ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650, >> ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700, >> ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics, >> ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics, >> ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics, >> ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics, >> ATI Radeon HD Graphics, ATI Radeon Graphics, >> ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics, >> ATI Radeon Graphics >> [1512371.676] (II) VESA: driver for VESA chipsets: vesa >> [1512371.676] (WW) Falling back to old probe method for vesa >> [1512371.677] (II) RADEON(0): TOTO SAYS 00000000f0100000 >> [1512371.677] (II) RADEON(0): MMIO registers at 0x00000000f0100000: size 64KB >> [1512371.677] (II) RADEON(0): PCI bus 1 card 5 func 0 >> [1512371.677] (II) RADEON(0): Creating default Display subsection in >> Screen section >> "Default Screen Section" for depth/fbbpp 24/32 >> [1512371.677] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32 >> [1512371.677] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes >> (32 bpp pixmaps) >> [1512371.677] (==) RADEON(0): Default visual is TrueColor >> [1512371.677] (II) Loading sub module "vgahw" >> [1512371.677] (II) LoadModule: "vgahw" >> [1512371.679] (II) Loading /usr/X11R6/lib/modules/libvgahw.so >> [1512371.681] (II) Module vgahw: vendor="X.Org Foundation" >> [1512371.681] compiled for 1.9.5, module version = 0.1.0 >> [1512371.681] ABI class: X.Org Video Driver, version 8.0 >> [1512371.681] (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, >> hwp->PIOOffset is 0x0000 >> [1512371.681] (==) RADEON(0): RGB weight 888 >> [1512371.681] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC) >> [1512371.681] (--) RADEON(0): Chipset: "ATI Radeon X1200" (ChipID = 0x791f) >> [1512371.681] (WW) RADEON(0): R500 support is under development. >> Please report any issues to xorg-driver-...@lists.x.org >> [1512371.681] (--) RADEON(0): Linear framebuffer at 0x00000000d0000000 >> [1512371.681] (II) RADEON(0): PCI card detected >> [1512371.681] (II) Loading sub module "int10" >> [1512371.681] (II) LoadModule: "int10" >> [1512371.683] (II) Loading /usr/X11R6/lib/modules/libint10.so >> [1512371.685] (II) Module int10: vendor="X.Org Foundation" >> [1512371.685] compiled for 1.9.5, module version = 1.0.0 >> [1512371.685] ABI class: X.Org Video Driver, version 8.0 >> [1512371.685] (II) RADEON(0): initializing int10 >> [1512371.686] (==) RADEON(0): Write-combining range (0xa0000,0x20000) >> was already clear >> [1512371.686] (==) RADEON(0): Write-combining range (0xc0000,0x40000) >> was already clear >> [1512371.687] (II) RADEON(0): Primary V_BIOS segment is: 0xc000 >> [1512371.687] (==) RADEON(0): Write-combining range (0x0,0x1000) was >> already clear >> [1512371.690] (II) RADEON(0): ATOM BIOS detected >> [1512371.690] (II) RADEON(0): ATOM BIOS Rom: >> [1512371.690] SubsystemVendorID: 0x1025 SubsystemID: 0x028c >> [1512371.690] IOBaseAddress: 0x9000 >> [1512371.690] Filename: BR33431.bin >> [1512371.690] BIOS Bootup Message: >> >> ATI Radeon Xpress for SJM11-YK >> >> >> [1512371.690] (II) RADEON(0): Framebuffer space used by Firmware (kb): 16 >> [1512371.690] (II) RADEON(0): Start of VRAM area used by Firmware: 0x17ffc000 >> [1512371.690] (II) RADEON(0): AtomBIOS requests 16kB of VRAM scratch space >> [1512371.690] (II) RADEON(0): AtomBIOS VRAM scratch base: 0x17ffc000 >> [1512371.690] (II) RADEON(0): Cannot get VRAM scratch space. >> Allocating in main memory instead >> [1512371.690] (II) RADEON(0): Default Engine Clock: 300000 >> [1512371.690] (II) RADEON(0): Default Memory Clock: 333000 >> [1512371.690] (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000 >> [1512371.690] (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0 >> [1512371.690] (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500 >> [1512371.690] (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000 >> [1512371.690] (II) RADEON(0): Maximum Pixel Clock: 400000 >> [1512371.690] (II) RADEON(0): Reference Clock: 14320 >> [1512371.690] drmOpenDevice: node name is /dev/drm0 >> [1512371.691] drmOpenDevice: open result is -1, (Device not configured) >> [1512371.691] drmOpenDevice: Open failed >> [1512371.691] [drm] failed to load kernel module "radeon" >> [1512371.691] (EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM >> [dri] Disabling DRI. >> [1512371.691] (II) RADEON(0): Generation 2 PCI interface, using max >> accessible memory >> [1512371.691] (II) RADEON(0): Detected total video RAM=393216K, >> accessible=262144K (PCI BAR=262144K) >> [1512371.691] (--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM) >> [1512371.691] (II) RADEON(0): Color tiling enabled by default >> [1512371.691] (II) RADEON(0): Max desktop size set to 2560x1600 >> [1512371.691] (II) RADEON(0): For a larger or smaller max desktop >> size, add a Virtual line to your xorg.conf >> [1512371.691] (II) RADEON(0): If you are having trouble with 3D, >> reduce the desktop size by adjusting the Virtual line to your >> xorg.conf >> [1512371.691] (II) Loading sub module "ddc" >> [1512371.691] (II) LoadModule: "ddc" >> [1512371.691] (II) Module "ddc" already built-in >> [1512371.691] (II) Loading sub module "i2c" >> [1512371.691] (II) LoadModule: "i2c" >> [1512371.691] (II) Module "i2c" already built-in >> [1512371.691] (II) RADEON(0): ref_freq: 1432, min_out_pll: 64800, >> max_out_pll: 120000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, >> sclk: 300.000000, mclk: 333.000000 >> [1512371.691] (II) RADEON(0): PLL parameters: rf=1432 rd=13 min=64800 >> max=120000; xclk=40000 >> [1512371.691] (WW) RADEON(0): LVDS Info: >> XRes: 1366, YRes: 768, DotClock: 72000 >> HBlank: 128, HOverPlus: 48, HSyncWidth: 32 >> VBlank: 35, VOverPlus: 3, VSyncWidth: 6 >> [1512371.692] encoder: 0x15 >> [1512371.692] encoder: 0xf >> [1512371.692] (II) RADEON(0): Output VGA-0 has no monitor section >> [1512371.692] (II) RADEON(0): I2C bus "VGA-0" initialized. >> [1512371.692] (II) RADEON(0): Output LVDS has no monitor section >> [1512371.692] (II) RADEON(0): I2C bus "LVDS" initialized. >> [1512371.692] (II) RADEON(0): Port0: >> [1512371.692] XRANDR name: VGA-0 >> [1512371.692] Connector: VGA >> [1512371.692] CRT1: INTERNAL_KLDSCP_DAC1 >> [1512371.692] DDC reg: 0x7e50 >> [1512371.692] (II) RADEON(0): Port1: >> [1512371.692] XRANDR name: LVDS >> [1512371.692] Connector: LVDS >> [1512371.692] LCD1: INTERNAL_LVTM1 >> [1512371.692] DDC reg: 0x7e40 >> [1512371.692] (II) RADEON(0): I2C device "VGA-0:ddc2" registered at >> address 0xA0. >> [1512371.697] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0 >> [1512371.817] Dac detection success >> [1512371.818] finished output detect: 0 >> [1512371.818] (II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0. >> [1512371.822] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0 >> [1512371.822] finished output detect: 1 >> [1512371.822] finished all detect >> [1512371.822] before xf86InitialConfiguration >> [1512371.827] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0 >> [1512371.947] Dac detection success >> [1512371.947] (II) RADEON(0): EDID for output VGA-0 >> [1512371.952] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0 >> [1512371.952] (II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed >> [1512371.952] (II) RADEON(0): Added native panel mode: 1366x768 >> [1512371.952] (II) RADEON(0): Printing probed modes for output LVDS >> [1512371.952] (II) RADEON(0): Modeline "1366x768"x60.0 72.00 1366 >> 1414 1446 1494 768 771 777 803 (48.2 kHz) >> [1512371.952] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 >> 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz) >> [1512371.952] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 >> 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz) >> [1512371.952] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 >> 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz) >> [1512371.953] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 >> 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz) >> [1512371.953] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 >> 720 800 480 483 487 500 -hsync +vsync (29.7 kHz) >> [1512371.953] (II) RADEON(0): Output VGA-0 disconnected >> [1512371.953] (II) RADEON(0): Output LVDS connected >> [1512371.953] (II) RADEON(0): Using exact sizes for initial modes >> [1512371.953] (II) RADEON(0): Output LVDS using initial mode 1366x768 >> [1512371.953] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) >> unless otherwise stated. >> [1512371.953] after xf86InitialConfiguration >> [1512371.953] (==) RADEON(0): DPI set to (96, 96) >> [1512371.953] (II) Loading sub module "fb" >> [1512371.953] (II) LoadModule: "fb" >> [1512371.955] (II) Loading /usr/X11R6/lib/modules/libfb.so >> [1512371.969] (II) Module fb: vendor="X.Org Foundation" >> [1512371.969] compiled for 1.9.5, module version = 1.0.0 >> [1512371.969] ABI class: X.Org ANSI C Emulation, version 0.4 >> [1512371.970] (II) Loading sub module "ramdac" >> [1512371.970] (II) LoadModule: "ramdac" >> [1512371.970] (II) Module "ramdac" already built-in >> [1512371.970] (==) RADEON(0): Using XAA acceleration architecture >> [1512371.970] (II) Loading sub module "xaa" >> [1512371.970] (II) LoadModule: "xaa" >> [1512371.972] (II) Loading /usr/X11R6/lib/modules/libxaa.so >> [1512371.979] (II) Module xaa: vendor="X.Org Foundation" >> [1512371.979] compiled for 1.9.5, module version = 1.2.1 >> [1512371.979] ABI class: X.Org Video Driver, version 8.0 >> [1512371.979] (==) RADEON(0): Write-combining range (0x0,0x1000) was >> already clear >> [1512371.980] (!!) RADEON(0): For information on using the multimedia >> capabilities >> of this adapter, please see http://gatos.sf.net. >> [1512371.980] (!!) RADEON(0): MergedFB support has been removed and >> replaced with xrandr 1.2 support >> [1512371.980] (II) UnloadModule: "vesa" >> [1512371.980] (II) Unloading /usr/X11R6/lib/modules/drivers/vesa_drv.so >> [1512371.980] (--) Depth 24 pixmap format is 32 bpp >> [1512371.980] (II) RADEON(0): RADEONScreenInit d0000000 0 0 >> [1512371.984] (==) RADEON(0): Write-combining range (0xa0000,0x10000) >> was already clear >> [1512372.327] Output LCD1 disable success >> [1512372.328] Blank CRTC 0 success >> [1512372.328] Disable CRTC 0 success >> [1512372.328] Blank CRTC 1 success >> [1512372.328] Disable CRTC 1 success >> [1512372.328] (II) RADEON(0): RADEONInitMemoryMap() : >> [1512372.328] (II) RADEON(0): mem_size : 0x18000000 >> [1512372.328] (II) RADEON(0): MC_FB_LOCATION : 0x7fff6800 >> [1512372.328] (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000 >> [1512372.328] (II) RADEON(0): Depth moves disabled by default >> [1512372.328] (II) RADEON(0): Memory manager initialized to (0,0) (1408,8191) >> [1512372.328] (II) RADEON(0): Reserved area from (0,1366) to (1408,1378) >> [1512372.328] (II) RADEON(0): Largest offscreen area available: 1408 x 6813 >> [1512372.328] (II) RADEON(0): RADEONRestoreMemMapRegisters() : >> [1512372.328] (II) RADEON(0): MC_FB_LOCATION : 0x7fff6800 0x7fff6800 >> [1512372.328] (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000 >> [1512372.328] (==) RADEON(0): Backing store disabled >> [1512372.329] (WW) RADEON(0): Direct rendering disabled >> [1512372.329] (II) RADEON(0): XAA Render acceleration unsupported on >> Radeon 9500/9700 and newer. Please use EXA instead. >> [1512372.329] (II) RADEON(0): Render acceleration disabled >> [1512372.329] (II) RADEON(0): num quad-pipes is 1 >> [1512372.329] (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA) >> [1512372.329] Screen to screen bit blits >> [1512372.329] Solid filled rectangles >> [1512372.329] 8x8 mono pattern filled rectangles >> [1512372.329] Indirect CPU to Screen color expansion >> [1512372.329] Solid Lines >> [1512372.329] Scanline Image Writes >> [1512372.329] Setting up tile and stipple cache: >> [1512372.329] 32 128x128 slots >> [1512372.329] 32 256x256 slots >> [1512372.329] 16 512x512 slots >> [1512372.329] (II) RADEON(0): Acceleration enabled >> [1512372.330] (==) RADEON(0): DPMS enabled >> [1512372.330] (==) RADEON(0): Silken mouse disabled >> [1512372.330] (II) RADEON(0): Will use 32 kb for hardware cursor 0 at >> offset 0x00767000 >> [1512372.330] (II) RADEON(0): Will use 32 kb for hardware cursor 1 at >> offset 0x0076d000 >> [1512372.330] (II) RADEON(0): Largest offscreen area available: 1408 x 6805 >> [1512372.330] (II) RADEON(0): Textured video requires CP on R5xx/R6xx/R7xx/IGP >> [1512372.330] Output CRT1 disable success >> [1512372.330] Output LCD1 disable success >> [1512372.330] Blank CRTC 0 success >> [1512372.330] Disable CRTC 0 success >> [1512372.330] Blank CRTC 1 success >> [1512372.330] Disable CRTC 1 success >> [1512372.331] Output LCD1 disable success >> [1512372.331] (II) RADEON(0): mode_set: x 0 y 0 >> [1512372.331] Mode 1366x768 - 1494 803 0 >> [1512372.331] (II) RADEON(0): RADEONRestoreMemMapRegisters() : >> [1512372.331] (II) RADEON(0): MC_FB_LOCATION : 0x7fff6800 0x7fff6800 >> [1512372.331] (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000 >> [1512372.331] freq: 72000000 >> [1512372.333] best_freq: 72000559 >> [1512372.333] best_feedback_div: 719 >> [1512372.333] best_ref_div: 13 >> [1512372.333] best_post_div: 11 >> [1512372.333] (II) RADEON(0): crtc(0) Clock: mode 72000, PLL 72000 >> [1512372.333] (II) RADEON(0): crtc(0) PLL : refdiv 13, fbdiv >> 0x2CF(719), pdiv 11 >> [1512372.387] Set CRTC 0 PLL success >> [1512372.388] Set CRTC Timing success >> [1512372.388] Set CRTC 0 Overscan success >> [1512372.388] Not using RMX >> [1512372.388] scaler 0 setup success >> [1512372.388] Set CRTC 0 Source success >> [1512372.388] crtc 0 YUV disable setup success >> [1512372.487] Output digital setup success >> [1512372.488] Enable CRTC 0 success >> [1512372.488] Unblank CRTC 0 success >> [1512372.848] Output LCD1 enable success >> [1512372.848] Output CRT1 disable success >> [1512372.848] Blank CRTC 1 success >> [1512372.848] Disable CRTC 1 success >> [1512372.848] (II) RADEON(0): RandR 1.2 enabled, ignore the following >> RandR disabled message. >> [1512372.848] (--) RandR disabled >> [1512372.848] (II) Initializing built-in extension Generic Event Extension >> [1512372.848] (II) Initializing built-in extension SHAPE >> [1512372.848] (II) Initializing built-in extension MIT-SHM >> [1512372.849] (II) Initializing built-in extension XInputExtension >> [1512372.849] (II) Initializing built-in extension XTEST >> [1512372.849] (II) Initializing built-in extension BIG-REQUESTS >> [1512372.849] (II) Initializing built-in extension SYNC >> [1512372.849] (II) Initializing built-in extension XKEYBOARD >> [1512372.849] (II) Initializing built-in extension XC-MISC >> [1512372.849] (II) Initializing built-in extension SECURITY >> [1512372.849] (II) Initializing built-in extension XINERAMA >> [1512372.849] (II) Initializing built-in extension XFIXES >> [1512372.849] (II) Initializing built-in extension RENDER >> [1512372.849] (II) Initializing built-in extension RANDR >> [1512372.849] (II) Initializing built-in extension COMPOSITE >> [1512372.849] (II) Initializing built-in extension DAMAGE >> [1512372.876] (II) AIGLX: Screen 0 is not DRI2 capable >> [1512372.876] (II) AIGLX: Screen 0 is not DRI capable >> [1512372.931] (II) AIGLX: Loaded and initialized >> /usr/X11R6/lib/modules/dri/swrast_dri.so >> [1512372.931] (II) GLX: Initialized DRISWRAST GL provider for screen 0 >> [1512372.932] (II) RADEON(0): Setting screen physical size to 361 x 203 >> [1512374.346] (**) Option "Device" "/dev/wsmouse0" >> [1512375.310] (--) synapt: x-axis range 1472 - 5888 resolution 88 >> [1512375.310] (--) synapt: y-axis range 1408 - 5012 resolution 143 >> [1512375.310] (--) synapt: invalid pressure range. defaulting to 0 - 256 >> [1512375.310] (--) synapt: invalid finger width range. defaulting to 0 - 16 >> [1512375.310] (**) Option "CorePointer" >> [1512375.310] (**) synapt: always reports core events >> [1512375.310] (II) XINPUT: Adding extended input device "synapt" >> (type: TOUCHPAD) >> [1512375.310] (**) synapt: (accel) MinSpeed is now constant deceleration 2.5 >> [1512375.310] (**) synapt: MaxSpeed is now 1.75 >> [1512375.310] (**) synapt: AccelFactor is now 0.035 >> [1512375.310] (**) synapt: (accel) keeping acceleration scheme 1 >> [1512375.310] (**) synapt: (accel) acceleration profile 1 >> [1512375.310] (**) synapt: (accel) acceleration factor: 2.000 >> [1512375.310] (**) synapt: (accel) acceleration threshold: 4 >> [1512375.812] (**) Option "SendCoreEvents" >> [1512375.812] (**) Stylus: always reports core events >> [1512375.812] (**) Stylus device is /dev/uhid0 >> [1512375.812] (**) Stylus is in absolute mode >> [1512375.812] (==) Stylus: threshold = 5 >> [1512375.812] (==) Stylus: suppress = 2 >> [1512375.812] (II) XINPUT: Adding extended input device "Stylus" (type: TABLET) >> [1512375.812] (**) Option "Device" "/dev/uhid0" >> [1512375.813] (EE) xf86OpenSerial: Cannot open device /dev/uhid0 >> Device not configured. >> [1512375.813] (EE) Error opening /dev/uhid0: Device not configured >> [1512375.813] (EE) Couldn't init device "w_stylus" >> [1512375.813] (II) UnloadModule: "usbtablet" >> [1512375.813] (**) Option "SendCoreEvents" >> [1512375.813] (**) Eraser: always reports core events >> [1512375.813] (**) Eraser device is /dev/uhid0 >> [1512375.813] (**) Eraser is in absolute mode >> [1512375.813] (==) Eraser: threshold = 5 >> [1512375.813] (==) Eraser: suppress = 2 >> [1512375.813] (II) XINPUT: Adding extended input device "Eraser" (type: TABLET) >> [1512375.813] (**) Option "Device" "/dev/uhid0" >> [1512375.813] (EE) xf86OpenSerial: Cannot open device /dev/uhid0 >> Device not configured. >> [1512375.813] (EE) Error opening /dev/uhid0: Device not configured >> [1512375.813] (EE) Couldn't init device "w_eraser" >> [1512375.813] (II) UnloadModule: "usbtablet" >> [1512375.813] (II) config/wscons: checking input device /dev/wskbd >> [1512375.813] (II) wskbd: using layout us >> [1512375.813] (II) wskbd: using option ctrl:swapcaps >> [1512375.813] (II) LoadModule: "kbd" >> [1512375.815] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so >> [1512375.891] (II) Module kbd: vendor="X.Org Foundation" >> [1512375.891] compiled for 1.9.5, module version = 1.6.0 >> [1512375.891] Module class: X.Org XInput Driver >> [1512375.891] ABI class: X.Org XInput driver, version 11.0 >> [1512375.891] (**) /dev/wskbd: always reports core events >> [1512375.891] (**) Option "Protocol" "standard" >> [1512375.891] (**) Option "XkbRules" "base" >> [1512375.891] (**) Option "XkbModel" "pc105" >> [1512375.892] (**) Option "XkbLayout" "us" >> [1512375.892] (**) Option "XkbOptions" "ctrl:swapcaps" >> [1512375.892] (II) XINPUT: Adding extended input device "/dev/wskbd" >> (type: KEYBOARD) >> [1512376.008] (II) config/wscons: checking input device /dev/wsmouse >> [1512376.008] (II) LoadModule: "mouse" >> [1512376.010] (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so >> [1512376.010] (II) Module mouse: vendor="X.Org Foundation" >> [1512376.010] compiled for 1.9.5, module version = 1.7.0 >> [1512376.010] Module class: X.Org XInput Driver >> [1512376.010] ABI class: X.Org XInput driver, version 11.0 >> [1512376.011] (**) Option "Device" "/dev/wsmouse" >> [1512376.011] (==) /dev/wsmouse: Protocol: "WSMouse" >> [1512376.011] (**) /dev/wsmouse: always reports core events >> [1512376.011] (**) Option "Device" "/dev/wsmouse" >> [1512376.037] (==) /dev/wsmouse: Emulate3Buttons, Emulate3Timeout: 50 >> [1512376.038] (**) /dev/wsmouse: ZAxisMapping: buttons 4 and 5 >> [1512376.038] (**) /dev/wsmouse: Buttons: 9 >> [1512376.038] (II) XINPUT: Adding extended input device "/dev/wsmouse" >> (type: MOUSE) >> [1512376.038] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1 >> [1512376.038] (**) /dev/wsmouse: (accel) acceleration profile 0 >> [1512376.038] (**) /dev/wsmouse: (accel) acceleration factor: 2.000 >> [1512376.038] (**) /dev/wsmouse: (accel) acceleration threshold: 4 >> [1512530.679] (II) 3rd Button detected: disabling emulate3Button >> [1512904.228] Output LCD1 disable success >> [1512904.243] Blank CRTC 0 success >> [1512904.243] Disable CRTC 0 success >> [1512904.243] Blank CRTC 1 success >> [1512904.243] Disable CRTC 1 success >> [1512904.243] (II) RADEON(0): RADEONRestoreMemMapRegisters() : >> [1512904.244] (II) RADEON(0): MC_FB_LOCATION : 0x7fff6800 0x7fff6800 >> [1512904.244] (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000 >> [1512904.244] (II) RADEON(0): avivo_restore ! >> [1512904.348] Enable CRTC 0 success >> [1512904.361] Unblank CRTC 0 success >> [1512904.361] (==) RADEON(0): Write-combining range (0xa0000,0x10000) >> was already clear >> [1512917.839] Output CRT1 disable success >> [1512918.138] Output LCD1 disable success >> [1512918.143] Blank CRTC 0 success >> [1512918.143] Disable CRTC 0 success >> [1512918.143] Blank CRTC 1 success >> [1512918.143] Disable CRTC 1 success >> [1512918.143] Output LCD1 disable success >> [1512918.143] (II) RADEON(0): mode_set: x 0 y 0 >> [1512918.144] Mode 1366x768 - 1494 803 0 >> [1512918.144] (II) RADEON(0): RADEONRestoreMemMapRegisters() : >> [1512918.144] (II) RADEON(0): MC_FB_LOCATION : 0x7fff6800 0x7fff6800 >> [1512918.144] (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000 >> [1512918.144] freq: 72000000 >> [1512918.146] best_freq: 72000559 >> [1512918.146] best_feedback_div: 719 >> [1512918.146] best_ref_div: 13 >> [1512918.146] best_post_div: 11 >> [1512918.146] (II) RADEON(0): crtc(0) Clock: mode 72000, PLL 72000 >> [1512918.146] (II) RADEON(0): crtc(0) PLL : refdiv 13, fbdiv >> 0x2CF(719), pdiv 11 >> [1512918.198] Set CRTC 0 PLL success >> [1512918.198] Set CRTC Timing success >> [1512918.198] Set CRTC 0 Overscan success >> [1512918.198] Not using RMX >> [1512918.198] scaler 0 setup success >> [1512918.198] Set CRTC 0 Source success >> [1512918.198] crtc 0 YUV disable setup success >> [1512918.298] Output digital setup success >> [1512918.298] Enable CRTC 0 success >> [1512918.298] Unblank CRTC 0 success >> [1512918.658] Output LCD1 enable success >> [1512918.658] Output CRT1 disable success >> [1512918.658] Blank CRTC 1 success >> [1512918.658] Disable CRTC 1 success >> [1512918.663] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0 >> [1512918.788] Dac detection success >> [1512918.793] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0 >> [1512918.793] (II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed >> [1512918.793] (II) RADEON(0): Added native panel mode: 1366x768 >> [1525244.032] (II) 3rd Button detected: disabling emulate3Button >> >> >> >> $ cat /etc/X11/xorg.conf >> Section "Files" >> FontPath "/usr/local/lib/X11/fonts/artwiz-aleczapka/" >> FontPath "/usr/local/lib/X11/fonts/terminus/" >> EndSection >> >> # Synaptic touchpad >> # source: Matthieu Herrb @tech >> # http://www.mail-archive.com/tech@openbsd.org/msg07094.html >> Section "InputDevice" >> Identifier "synapt" >> Driver "synaptics" >> Option "Device" "/dev/wsmouse0" >> Option "AutoServerLayout" "true" >> EndSection >> >> Section "InputDevice" >> Identifier "mouse0" >> Driver "mouse" >> Option "Device" "/dev/wsmouse" >> Option "AutoServerLayout" "true" >> EndSection >> >> # Wacom begin >> # http://comments.gmane.org/gmane.os.openbsd.misc/185287 >> # http://mongers.org/openbsd/graphire4 >> Section "InputDevice" >> Identifier "w_stylus" >> Driver "usbtablet" >> Option "Type" "stylus" >> Option "Device" "/dev/uhid0" >> Option "Mode" "Absolute" >> Option "Threshold" "10" >> EndSection >> >> Section "InputDevice" >> Identifier "w_eraser" >> Driver "usbtablet" >> Option "Type" "eraser" >> Option "Device" "/dev/uhid0" >> Option "Mode" "Absolute" >> EndSection >> # Wacom done >> >> Section "ServerFlags" >> Option "DontZap" "false" >> Option "AllowMouseOpenFail" "True" >> EndSection >> >> Section "ServerLayout" >> Identifier "Layout0" >> >> # Synaptic touchpad >> InputDevice "synapt" "CorePointer" >> InputDevice "mouse0" "SendCoreEvents" >> >> # Wacom >> InputDevice "w_stylus" "SendCoreEvents" >> InputDevice "w_eraser" "SendCoreEvents" >> EndSection >> >> >> >> a bit of side note, I don't know why the following entries in the >> Xorg.0.log have "**" markers as they are not found in the config file: >> >> [1512375.310] (**) synapt: (accel) MinSpeed is now constant deceleration 2.5 >> [1512375.310] (**) synapt: MaxSpeed is now 1.75 >> [1512375.310] (**) synapt: AccelFactor is now 0.035 >> [1512375.310] (**) synapt: (accel) keeping acceleration scheme 1 >> [1512375.310] (**) synapt: (accel) acceleration profile 1 >> [1512375.310] (**) synapt: (accel) acceleration factor: 2.000 >> [1512375.310] (**) synapt: (accel) acceleration threshold: 4 >> >> > > > > -- > Alexandr Shadchin
