I am using the latest build of OpenBSD/amd64 (dated Aug 30).
I have been using Chrome recently, as it appeared to be a little more
stable (the 12.x was anyway). The only annoying issue is that often,
I will try to surf to a page, and the browser just sits there, and
spins and spins and spins. The site isn't down, it just acts like it
doesn't know what to do 'sending request' is all I get, if that.
Tonight, I built 13.0.782.215, but as pkg_tools is trying to create
the package, I receive the following error:
Error: Libraries in packing-lists in the ports tree
and libraries from installed packages don't match.
And it appeared that 'nss' and 'nspr' were not checked to see if they
are updated. So I built them manually. No problem. Now, when I
start chrome, my homepage comes up, but I can't do anything else. No
other sites will load, not yahoo.com, fark.com, gmail, etc. These
sites are not down, and I can't tell why chrome just refuses to
function. Sometimes, I can fix it by hitting "refresh" a few times on
the current page.
building xxxterm, first gnutls received the above error, looking for
an updated 'hogweed' and 'nettle', I did a bit of hunting, and found
libnettle, and built it. Then I built gnutls, and then xxxterm.
I got them built, but shouldn't the build look for these issues, and
'update' to the later version? My mk.conf isn't pulling packages, and
I'm using a -current from less than two hours ago...
If there is any other info I can provide, please ask. my current
ulimit values, and dmesg are below.
Bryan
P.S. Wouldn't you know, after I installed chrome, and rebooted, the
above issue has gone away... for now... well, it's better than
Firefox...
ulimit -a
# ulimit -a
time(cpu-seconds) unlimited
file(blocks) unlimited
coredump(blocks) unlimited
data(kbytes) 8388608
stack(kbytes) 8192
lockedmem(kbytes) 2700382
memory(kbytes) 8089788
nofiles(descriptors) 128
processes 1310
root@laptop-openbsd /usr/ports/www/xxxterm
# exit
brakeb@laptop-openbsd ~
$ ulimit -a
time(cpu-seconds) unlimited
file(blocks) unlimited
coredump(blocks) unlimited
data(kbytes) 2097152
stack(kbytes) 4096
lockedmem(kbytes) 2700382
memory(kbytes) 8089788
nofiles(descriptors) 256
processes 256
dmesg:
OpenBSD 5.0-current (GENERIC.MP) #78: Tue Aug 30 22:00:22 CDT 2011
root@laptop-openbsd:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8538869760 (8143MB)
avail mem = 8297443328 (7913MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf6530 (57 entries)
bios0: vendor Dell Inc. version "A24" date 08/19/2010
bios0: Dell Inc. Latitude E6500
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET DMAR APIC ASF! MCFG SLIC SSDT
acpi0: wakeup devices PCI0(S4) PCIE(S4) USB1(S0) USB2(S0) USB3(S0)
USB4(S0) USB5(S0) USB6(S0) EHC2(S0) EHCI(S0) AZ
AL(S3) RP01(S4) RP02(S4) RP03(S4) RP04(S3) RP05(S3) RP06(S5) LID_(S3) PBTN(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU P8800 @ 2.66GHz, 2660.36 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,
HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU P8800 @ 2.66GHz, 2660.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,
HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG
cpu1: 3MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 3 (PCIE)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 11 (RP01)
acpiprt3 at acpi0: bus 12 (RP02)
acpiprt4 at acpi0: bus 13 (RP03)
acpiprt5 at acpi0: bus 14 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 107 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT0 model "DELL KY26603" serial 5171 type LION oem "Sanyo"
acpibat1 at acpi0: BAT1 not present
acpivideo0 at acpi0: VID_
acpivideo1 at acpi0: VID_
acpivout0 at acpivideo1: LCD_
acpivideo2 at acpi0: VID2
cpu0: Enhanced SpeedStep 2660 MHz: speeds: 2668, 2667, 2134, 1600, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16
drm0 at inteldrm0
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi,
address 00:ff:aa:c7:4b:48
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 22
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: IDT 92HD71B7, Intel/0x2802, using IDT 92HD71B7
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
pci1 at ppb0 bus 11
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
pci2 at ppb1 bus 12
ral0 at pci2 dev 0 function 0 "Ralink RT3090" rev 0x00: apic 2 int 17,
address 00:ff:aa:34:99:77
ral0: MAC/BBP RT3090 (rev 0x3213), RF RT3020 (MIMO 1T1R)
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi
pci3 at ppb2 bus 13
ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi
pci4 at ppb3 bus 14
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 20
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 22
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 20
usb1 at ehci1: USB revision 2.0
u5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 22
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 20
usb1 at ehci1: USB revision 2.0uhub1 at usb1 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci5 at ppb4 bus 3
cbb0 at pci5 dev 1 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 2 int 19
"Ricoh 5C832 Firewire" rev 0x04 at pci5 dev 1 function 1 not configured
sdhc0 at pci5 dev 1 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 2 int 18
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x11 at pci5 dev 1 function 3 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD2500BEVS-2, 01.0> SCSI3
0/direct fixed naa.50014ee2ab9a23b8
sd0: 238475MB, 512 bytes/sector, 488397168 sectors
cd0 at scsibus0 targ 1 lun 0: <TSSTcorp, DVD+-RW TS-U633A, DW10> ATAPI
5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 17
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
ugen0 at uhub4 port 1 "Broadcom Corp 5880" rev 1.10/1.01 addr 2
uhub8 at uhub6 port 2 "Broadcom BCM2046B1" rev 2.00/1.00 addr 2
uhidev0 at uhub8 port 1 configuration 1 interface 0 "Broadcom product
0x4502" rev 2.00/1.00 addr 3
uhidev0: iclass 3/1, 1 report id
ukbd0 at uhidev0 reportid 1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub8 port 2 configuration 1 interface 0 "Broadcom product
0x4503" rev 2.00/1.00 addr 4
uhidev1: iclass 3/1, 125 report ids
ums0 at uhidev1 reportid 2: 3 buttons
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 125: input=2, output=0, feature=0
ugen1 at uhub8 port 3 "Broadcom Corp BCM92046DG-CL1ROM" rev 2.00/8.18 addr 5
ugen2 at uhub7 port 1 "AsureWave product 0x3314" rev 2.00/52.76 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a swap on sd0b dump on sd0b
