jakemsr sent this which fixed the problem on "6SERIES" and is documented on
datasheets of these other chipsets as well:
Index: azalia.c
===================================================================
RCS file: /cvs/src/sys/dev/pci/azalia.c,v
retrieving revision 1.198
diff -u -r1.198 azalia.c
--- azalia.c 3 Jul 2011 15:47:16 -0000 1.198
+++ azalia.c 7 Aug 2011 16:46:21 -0000
@@ -448,6 +448,17 @@
}
break;
+
+ case PCI_PRODUCT_INTEL_6SERIES_HDA:
+ case PCI_PRODUCT_INTEL_3400_HDA:
+ case PCI_PRODUCT_INTEL_QS57_HDA:
+ reg = azalia_pci_read(az->pc, az->tag, 0x79);
+ azalia_pci_write(az->pc, az->tag, 0x79, reg & ~0x08);
+ reg = azalia_pci_read(az->pc, az->tag, 0x79);
+ if (reg & 0x08)
+ printf(": could not enable PCIe cache snooping\n");
+ break;
+
}
}
Jairo Souto [jairo.so...@holdinggem.com.br] wrote:
> I can get only noise from the audio of the Acer Aspire 5820T-6825 azalia.
>
> The kernel is OpenBSD uranio.dlg 4.9 GENERIC.MP#2 amd64
> only modified for the alc0 driver to operate. As I have a
> compatible wireless usb there is no problem with the Broadcom not
> configured. But the sound is required and I can not get it to
> run.
>
> Do you have any help?
>
> dmesg, audio -a, mixerctl -av follow
>
> dmesg:
> -----
> OpenBSD 4.9 (GENERIC.MP) #2: Sun Jul 17 09:40:29 BRT 2011
> jso...@uranio.dlg:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> RTC BIOS diagnostic error 80<clock_battery>
> real mem = 3008843776 (2869MB)
> avail mem = 2914725888 (2779MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe9460 (51 entries)
> bios0: vendor INSYDE version "V1.23" date 12/21/2010
> bios0: Acer Aspire 5820T
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC BOOT ASPT WDAT SSDT
> acpi0: wakeup devices EHC1(S3) EHC2(S3) PXSX(S4) RP01(S4) PXSX(S4) PXSX(S4)
> PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, 2660.88 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: apic clock running at 133MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, 2660.46 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu2 at mainbus0: apid 4 (application processor)
> cpu2: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, 2660.46 MHz
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu3 at mainbus0: apid 5 (application processor)
> cpu3: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, 2660.46 MHz
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
> cpu3: 256KB 64b/line 8-way L2 cache
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 2
> acpimcfg0 at acpi0 addr 0xf0000000, bus 0-127
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P2)
> acpiprt2 at acpi0: bus 3 (P0P1)
> acpiprt3 at acpi0: bus 1 (RP01)
> acpiprt4 at acpi0: bus -1 (RP02)
> acpiprt5 at acpi0: bus -1 (RP03)
> acpiprt6 at acpi0: bus -1 (RP04)
> acpiprt7 at acpi0: bus -1 (RP05)
> acpiprt8 at acpi0: bus -1 (RP07)
> acpiprt9 at acpi0: bus -1 (RP08)
> acpiprt10 at acpi0: bus -1 (PEG3)
> acpiprt11 at acpi0: bus -1 (PEG5)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3, C1, PSS
> acpicpu1 at acpi0: C3, C1, PSS
> acpicpu2 at acpi0: C3, C1, PSS
> acpicpu3 at acpi0: C3, C1, PSS
> acpitz0 at acpi0: critical temperature 105 degC
> acpibat0 at acpi0: BAT1 model "AS10B3E" serial 7F5A type LION oem "SANYO"
> acpiac0 at acpi0: AC unit online
> acpibtn0 at acpi0: PWRB
> acpibtn1 at acpi0: LID0
> acpibtn2 at acpi0: SLPB
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: LCD_
> acpivideo1 at acpi0: VGA_
> cpu0: Enhanced SpeedStep 2660 MHz: speeds: 2667, 2666, 2533, 2399, 2266,
> 2133, 1999, 1866, 1733, 1599, 1466, 1333, 1199 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x18
> vga1 at pci0 dev 2 function 0 "Intel Mobile HD graphics" rev 0x18
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
> inteldrm0 at vga1: apic 2 int 16 (irq 7)
> drm0 at inteldrm0
> "Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured
> ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 2 int 16 (irq
> 7)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x05: apic 2 int
> 22 (irq 11)
> azalia0: codecs: Realtek ALC269, Intel/0x2804, using Realtek ALC269
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05: apic 2 int 17 (irq
> 255)
> pci1 at ppb0 bus 1
> alc0 at pci1 dev 0 function 0 "Attansic Technology L1D" rev 0xc0: apic 2 int
> 16 (irq 7), address 60:eb:69:d8:e3:e3
> atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 15
> ppb1 at pci0 dev 28 function 5 "Intel 3400 PCIE" rev 0x05: apic 2 int 16 (irq
> 255)
> pci2 at ppb1 bus 2
> "Broadcom BCM43225" rev 0x01 at pci2 dev 0 function 0 not configured
> ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 2 int 23 (irq
> 11)
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa5
> pci3 at ppb2 bus 3
> pcib0 at pci0 dev 31 function 0 "Intel HM55 LPC" rev 0x05
> ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x05: apic 2 int 19
> (irq 10), AHCI 1.3
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD5000BEVT-2, 01.0> SCSI3 0/direct
> fixed
> sd0: 476940MB, 512 bytes/sec, 976773168 sec total
> cd0 at scsibus0 targ 1 lun 0: <MATSHITA, DVD-RAM UJ892AS, 1.00> ATAPI 5/cdrom
> removable
> ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x05: apic 2 int 19
> (irq 10)
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
> spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
> itherm0 at pci0 dev 31 function 6 "Intel 3400 Thermal" rev 0x05
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> mtrr: Pentium Pro MTRR support
> uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
> uvideo0 at uhub2 port 1 configuration 1 interface 0 "Suyin 1.3M WebCam" rev
> 2.00/2.15 addr 3
> video0 at uvideo0
> uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
> uhidev0 at uhub3 port 2 configuration 1 interface 0 "vendor 0x15d9 USB
> OPTICAL MOUSE" rev 1.10/1.00 addr 3
> uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons, Z dir
> wsmouse1 at ums0 mux 0
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> root on sd0a swap on sd0b dump on sd0b
>
>
> audio -a:
> --------
> name=HD-Audio
> version=1.0
> config=azalia0
> encodings=slinear_le:16:2:1,slinear_le:20:4:1,slinear_le:24:4:1
> properties=full_duplex,independent
> full_duplex=0
> fullduplex=0
> blocksize=9600
> hiwat=6
> lowat=4
> output_muted=0
> monitor_gain=0
> mode=
> play.rate=48000
> play.sample_rate=48000
> play.channels=2
> play.precision=16
> play.bps=2
> play.msb=1
> play.encoding=slinear_le
> play.gain=126
> play.balance=32
> play.port=0x0
> play.avail_ports=0x0
> play.seek=0
> play.samples=0
> play.eof=0
> play.pause=0
> play.error=0
> play.waiting=0
> play.open=0
> play.active=0
> play.buffer_size=65536
> play.block_size=9600
> play.errors=0
> record.rate=48000
> record.sample_rate=48000
> record.channels=2
> record.precision=16
> record.bps=2
> record.msb=1
> record.encoding=slinear_le
> record.gain=120
> record.balance=32
> record.port=0x0
> record.avail_ports=0x0
> record.seek=0
> record.samples=0
> record.eof=0
> record.pause=0
> record.error=0
> record.waiting=0
> record.open=0
> record.active=0
> record.buffer_size=65536
> record.block_size=9600
> record.errors=0
>
>
> mixerctl -av:
> ------------
> inputs.dac-0:1=126,126
> inputs.dac-2:3=126,126
> record.adc-2:3_mute=off [ off on ]
> record.adc-2:3=120,120
> record.adc-0:1_mute=off [ off on ]
> record.adc-0:1=120,120
> inputs.mix_source=mic2 { mic2 }
> inputs.mix_mic2=120,120
> inputs.mix2_source=dac-0:1,mix { dac-0:1 mix }
> inputs.mix3_source=dac-2:3,mix { dac-2:3 mix }
> inputs.mic=85,85
> outputs.spkr_source=mix3 [ mix2 mix3 ]
> outputs.spkr_mute=on [ off on ]
> outputs.spkr_eapd=on [ off on ]
> outputs.mic2_source=mix3 [ mix3 ]
> outputs.mic2_mute=off [ off on ]
> inputs.mic2=85,85
> outputs.mic2_dir=input-vr80 [ none output input input-vr0 input-vr50
> input-vr80 ]
> outputs.SPDIF_source=dig-dac-0:1 [ dig-dac-0:1 ]
> outputs.hp_source=mix2 [ mix2 mix3 ]
> outputs.hp_mute=off [ off on ]
> outputs.hp_boost=off [ off on ]
> record.adc-0:1_source=mic [ mic2 mix mic ]
> record.adc-2:3_source=mic2,mix { mic2 mix }
> outputs.mic2_sense=plugged [ unplugged plugged ]
> outputs.hp_sense=plugged [ unplugged plugged ]
> outputs.spkr_muters=mic2,hp { mic2 hp }
> outputs.master=126,126
> outputs.master.mute=off [ off on ]
> outputs.master.slaves=dac-0:1,dac-2:3,spkr,hp { dac-0:1 dac-2:3 spkr mic2 hp
> }
> record.volume=120,120
> record.volume.mute=off [ off on ]
> record.volume.slaves=adc-2:3,adc-0:1 { adc-2:3 adc-0:1 mic mic2 }
> outputs.mode=analog [ analog digital ]
>
>
> vmstat -i:
> ---------
> interrupt total rate
> irq0/clock 130406 401
> irq0/ipi 34961 107
> irq144/acpi0 4 0
> irq146/inteldrm0 438 1
> irq146/ehci0 46 0
> irq146/alc0 221 0
> irq96/ehci1 1352 4
> irq97/ahci0 4654 14
> irq147/pckbc0 1013 3
> irq148/pckbc0 137 0
> Total 173232 533
>
> --Jairo Souto (38)8816-1254
--
the preceding comment is my own and in no way reflects the opinion of the Joint
Chiefs of Staff
