On Thursday 20 October 2005 19:01, you wrote:
>Currently tracking 30+ pieces of hardware. However, I need help: I
>need people to email me supported hardware, or use the "Submit New
> Kit" link on the page to do it. It's pretty easy, and the only
> requirement is that you need to have personally witnessed its
> (correct) operation with some version of OpenBSD, and that it is
> possible to buy it new. Speaking of which: Which driver supports the
> Adaptec 1205SA? Anybody? Bueller? Manpages are not forthcoming.
I submitted the Adaptec 1205 SA to your list. I put it in my OpenBSD 3.7
machine and it just worked.
The drive plugged into the 1205 is wd1. I believe these are the relevant
dmesg lines:
pciide1 at pci0 dev 16 function 0 "CMD Technology SiI3112 SATA" rev
0x02: DMA
pciide1: using irq 10 for native-PCI interrupt
pciide1: port 0: device present, speed: 1.5Gb/s
wd1 at pciide1 channel 0 drive 0: <ST3400832AS>
wd1: 16-sector PIO, LBA48, 381554MB, 781422768 sectors
wd1(pciide1:0:0): using BIOS timings, Ultra-DMA mode 6
The full dmesg follows, in case what i quoted above isn't sufficient:
OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 451
MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MM
X,FXSR
real mem = 536453120 (523880K)
avail mem = 482713600 (471400K)
using 4278 buffers containing 26927104 bytes (26296K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 01/15/99, BIOS32 rev. 0 @
0xfdb60
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI BIOS has 10 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA"
rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4800 0xcc800/0x2800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wi
red to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 5T010H1>
wd0: 16-sector PIO, LBA, 9536MB, 19531250 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, CD-ROM CDU55E, 1.0u> SCSI0 5/cdrom
removabl
e
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:0:1): using PIO mode 0
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 7 function 3 not
configured
fxp0 at pci0 dev 15 function 0 "Intel 82557" rev 0x02: irq 9, address
00:a0:c9:7
4:9a:a9
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0
pciide1 at pci0 dev 16 function 0 "CMD Technology SiI3112 SATA" rev
0x02: DMA
pciide1: using irq 10 for native-PCI interrupt
pciide1: port 0: device present, speed: 1.5Gb/s
wd1 at pciide1 channel 0 drive 0: <ST3400832AS>
wd1: 16-sector PIO, LBA48, 381554MB, 781422768 sectors
wd1(pciide1:0:0): using BIOS timings, Ultra-DMA mode 6
pciide2 at pci0 dev 18 function 0 "Promise PDC20269" rev 0x02: DMA,
channel 0 co
nfigured to native-PCI, channel 1 configured to native-PCI
pciide2: using irq 5 for native-PCI interrupt
wd2 at pciide2 channel 0 drive 0: <Maxtor 6Y250P0>
wd2: 16-sector PIO, LBA48, 239372MB, 490234752 sectors
wd2(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 6
vga1 at pci0 dev 20 function 0 "S3 Trio32/64" rev 0x54
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83781D
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ed65 netmask ef65 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
dkcsum: wd2 matched BIOS disk 82
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
--
------------------------------------------------------------------------
Dan Ramaley
Network Programmer/Analyst
(515) 271-4540
Dial Center 118, Drake University
