Hi, since I am probably the only one running OpenBSD on this machine I
am not expecting much. But here it goes.
The builtin wifi chipset is unsupported still. I've bought one of
those mini dlink wifi adapaters and its a great solution. Thanks for
that damien@! Having a big usb-dongle stickout out a netbook just
looks wrong :)
The headphones work fine, mic seems to be working although I am still
in the process of getting some sort of voip/video chat software
running.
The built-in bluetooth is not working, neither are the laptop speakers
or I am just not smart enough :)
$ mixerctl -v
outputs.hp_source=mix2 [ dac-0:1 dac-2:3 mix2 ]
outputs.hp_boost=off [ off on ]
outputs.mic_dir=none [ none input input-vr0 input-vr50 input-vr80 ]
outputs.mic2_dir=none [ none input input-vr0 input-vr50 input-vr80 ]
outputs.spkr_source=dac-2:3 [ dac-0:1 dac-2:3 mix2 ]
inputs.dac-0:1_mute=off [ off on ]
inputs.dac-0:1=126,126
inputs.dac-2:3_mute=off [ off on ]
inputs.dac-2:3=126,126
inputs.sel_source=mix2 [ dac-0:1 dac-2:3 mix2 ]
inputs.mix2_source=dac-0:1,dac-2:3,sel2,sel3 { dac-0:1 dac-2:3 sel2 sel3 }
inputs.mix2_dac-0:1=120,120
inputs.mix2_dac-2:3=120,120
inputs.mix2_sel2=120,120
inputs.mix2_sel3=120,120
inputs.sel2_source=mic2 [ mic mic2 ]
outputs.sel2=85,85
inputs.sel3_source=mic [ mic mic2 ]
outputs.sel3=85,85
record.adc-0:1_source=sel2 [ sel2 mix2 ]
record.adc-0:1_mute=off [ off on ]
record.adc-0:1=119,119
record.adc-2:3_source=sel3 [ sel3 mix2 ]
record.adc-2:3_mute=off [ off on ]
record.adc-2:3=119,119
inputs.sel6_source=adc-0:1 [ adc-0:1 adc-2:3 ]
inputs.sel7_source=adc-0:1 [ adc-0:1 adc-2:3 ]
inputs.beep_mute=off [ off on ]
inputs.beep=85
outputs.hp_sense=unplugged [ unplugged plugged ]
outputs.mic_sense=unplugged [ unplugged plugged ]
outputs.spkr_muters=hp { hp }
outputs.master=126,126
outputs.master.mute=off [ off on ]
outputs.master.slaves=dac-0:1,dac-2:3 { dac-0:1 dac-2:3 sel2 sel3 beep }
record.volume=119,119
record.volume.mute=off [ off on ]
record.volume.slaves=adc-0:1,adc-2:3 { adc-0:1 adc-2:3 }
$
$ usbdevs -vd
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub0
port 1 powered
port 2 powered
port 3 powered
port 4 addr 2: high speed, power 98 mA, config 1, CNF8243(0xb159),
Chicony Electronics Co., Ltd.(0x04f2), rev 85.39, iSerialNumber SN0001
uvideo0
port 5 powered
$ usbdevs -vd
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub0
port 1 powered
port 2 powered
port 3 powered
port 4 addr 2: high speed, power 98 mA, config 1, CNF8243(0xb159),
Chicony Electronics Co., Ltd.(0x04f2), rev 85.39, iSerialNumber SN0001
uvideo0
port 5 powered
port 6 powered
port 7 powered
port 8 addr 3: high speed, power 500 mA, config 1, 802.11n WLAN
Adapter(0x3308), Realtek(0x2001), rev 2.00, iSerialNumber 00e04c000001
urtwn0
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub1
port 1 powered
port 2 addr 2: full speed, self powered, config 1, HP Integrated
Module(0x231d), Broadcom Corp(0x03f0), rev 3.06
ugen0
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub2
port 1 powered
port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub3
port 1 powered
port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub4
port 1 powered
port 2 powered
$
$ dmesg
OpenBSD 4.9-current (GENERIC.MP) #97: Mon Jun 27 10:01:47 MDT 2011
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error
bf<clock_battery,config_unit,memory_size,fixed_disk,invalid_time>
cpu0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE
real mem = 2131890176 (2033MB)
avail mem = 2086793216 (1990MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/20/09, SMBIOS rev. 2.6 @
0x7e815000 (22 entries)
bios0: vendor Hewlett-Packard version "68PGU Ver. F.06" date 05/25/2010
bios0: Hewlett-Packard HP Mini 5102
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG ASF! SSDT SLIC SSDT
acpi0: wakeup devices HDEF(S3) RP01(S5) WNIC(S5) RP04(S0) NIC_(S0)
USB1(S0) USB2(S0) USB3(S0) USB4(S0) EHC1(S0) PCIB(S5) HST1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N450 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,M
WAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus -1 (PEGP)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP03)
acpiprt3 at acpi0: bus 67 (RP04)
acpiprt4 at acpi0: bus 68 (PCIB)
acpiprt5 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: APPR
acpipwrres1 at acpi0: COMP
acpipwrres2 at acpi0: LPP_
acpipwrres3 at acpi0: PFN0
acpipwrres4 at acpi0: PFN1
acpipwrres5 at acpi0: PFN2
acpipwrres6 at acpi0: PFN3
acpipwrres7 at acpi0: PFN4
acpitz0 at acpi0: critical temperature is 105 degC
acpitz1 at acpi0: critical temperature is 103 degC
acpitz2 at acpi0: critical temperature is 78 degC
acpitz3 at acpi0: critical temperature is 103 degC
acpitz4 at acpi0: critical temperature is 110 degC
acpibat0 at acpi0: BAT0 model "Primary" serial 10707 2010/07/21 type
LIon oem "Hewlett-Packard"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit offline
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: DGFX
acpivideo1 at acpi0: GFX0
acpivout0 at acpivideo1: DD02
bios0: ROM list: 0xc0000/0xda00!
cpu0: Enhanced SpeedStep 1663 MHz: speeds: 1666, 1333, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x00
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x80000000, size 0x10000000
inteldrm0 at vga1: msi
drm0 at inteldrm0
"Intel Pineview Video" rev 0x00 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: IDT 92HD75B1/2
audio0 at azalia0ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE"
rev 0x02: apic 1 int 16
pci1 at ppb0 bus 1
"Broadcom BCM43224" rev 0x01 at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 18
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1 int 19
pci3 at ppb2 bus 67
mskc0 at pci3 dev 0 function 0 "Marvell Yukon 88E8059" rev 0x11,
Yukon-2 Optima (0x1): apic 1 int 19
msk0 at mskc0 port A: address 1c:c1:de:9c:04:e2
eephy0 at msk0 phy 0: PHYG65G Gigabit PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 20
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 22
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 19
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 20
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 68
pcib0 at pci0 dev 31 function 0 "Intel Tigerpoint LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x02: msi, AHCI 1.1
ahci0: PHY offline on port 1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS72502, PC2O> SCSI3
0/direct fixed naa.5000cca5b8dd833c
sd0: 238475MB, 512 bytes/sec, 488397168 sec total
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 4 configuration 1 interface 0 "Chicony
Electronics Co., Ltd. CNF8243" rev 2.00/85.39 addr 2
video0 at uvideo0
urtwn0 at uhub0 port 8 "Realtek 802.11n WLAN Adapter" rev 2.00/2.00 addr 3
urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address 34:08:04:99:96:06
ugen0 at uhub1 port 2 "Broadcom Corp HP Integrated Module" rev 2.00/3.06 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a swap on sd0b dump on sd0b
acpitz4: FDTZ: failed to read _TMP
acpitz4: FDTZ: failed to read temp
acpitz4: FDTZ: failed to read _TMP
acpitz4: FDTZ: failed to read temp
Getting rid of those acpi failures would be nice too! Again, not expecting much.
Thanks for your time, the machine is running great, and in the process
of all this I learned how to upgrade without install media/kernel!
Have a great day,
Frans
