Hello list,
Today I installed OpenBSD 4.9 onto my machine and I came into a strange
problem - when the network cable is plugged into 1 of network cards it boots
into ddb. When I switch cable to other card - it boots fine. I tried to
change the problematic card (tried out 3 different cards) and then boot with
cable plugged into the new one card - the problem still persist. But when
machine boots up (if cable is plugged out) and I plug the cable into the
problematic card, it works fine. I can ping, and reach any network machine,
but if I try to halt with the cable still plugged in I end up in ddb again.
I also tried to change irq in the bios, but nothing helped. I also tried to
boot into bsd, not bsd.mp, but it didn't help either. So I have no ideas
what can I do to make my machine work. Please help :)
Here is the info from the machine (trace, ps and dmesg).
Stopped at bus_space_write_2+0x28: popl %ebp
ddb{1}>trace
bus_space_write_2(0,1000,8,c04,d020343a) at bus_space_write_2+0x28
vr_stop(d1255000,d12d6700,d7a1bc9c,d0a33680,100) at vr_stop+0xc1
vr_init(d1255000,0,70,2,d052f53f) at vr_init+0x24
vr_ioctl(d1255034,8020690c,d12d6000,0,80) at vr_ioctl+0x123
in_ifinit(d1255034,d12d6000,d7a1be94,0,1) at in_ifinit+0x86
in_control(d5357000,8040691a,d7a1be84,d1255034,d1255034) at in_control+0x59a
ifioctl(d5357000,8040691a,d7a1be84,d539a76c,0) at ifioctl+0x216
sys_ioctl(d539a76c,d7a1bf64,d7a1bf84,d7a1bfa8,d539a76c) at sys_ioctl+0x1b8
syscall() at syscall+0x332
--- syscall (number 12) ---
0x2:
ddb{1}>ps
PID PPID PGRP UID S FLAGS WAIT
COMMAND
*15398 18148 18148 0 7 0x2004000
iconfig
18148 1 18148 0 3 0x2004080 pause
sh
16 0 0 0 3 0x2100200
aiodoned aiodoned
15 0 0 0 3 0x2100200
syncer update
14 0 0 0 3 0x2100200
cleaner cleaner
13 0 0 0 3 0x100200
reaper reaper
12 0 0 0 3 0x2100200
pgdaemon pagedaemon
11 0 0 0 3 0x2100200
bored crypto
10 0 0 0 3 0x2100200
pftm pfpurge
9 0 0 0 3 0x2100200
usbtsk usbtask
8 0 0 0 3 0x2100200
usbatsk usbatsk
7 0 0 0 3 0x2100200
bored intelrel
6 0 0 0 3 0x2100200
acpi0 acpi0
5 0 0 0 3 0x40100200
idle1
4 0 0 0 3 0x2100200
bored syswq
3 0 0 0 7 0x40100200
idle0
2 0 0 0 3 0x2100200
kmalloc kmthread
1 0 1 0 3 0x2004080
wait init
0 -1 0 0 3 0x2080200
scheduler swapper
#dmesg
OpenBSD 4.9 (GENERIC.MP) #794: Wed Mar 2 07:19:02 MST 2011
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
SH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF
,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
real mem = 259416064 (247MB)
avail mem = 245018624 (233MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/18/05, BIOS32 rev. 0 @ 0xeb660,
SMBIOS rev. 2.4 @ 0xeeb40 (57 entries)
bios0: vendor Hewlett-Packard version "786D1 v01.03" date 05/18/2005
bios0: Hewlett-Packard HP Compaq dc7600 Ultra-slim Desktop
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC ASF! MCFG
acpi0: wakeup devices PCI0(S4) PEG1(S4) PCX1(S4) PCX2(S4) PCX5(S4) PCX6(S4)
HUB_(S4) COM1(S4) COM2(S4) USB1(S1) USB2(S1) USB
3(S1) USB4(S1) EUSB(S1) PBTN(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
SH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF
,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-64
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus 32 (PCX1)
acpiprt3 at acpi0: bus 63 (PCX2)
acpiprt4 at acpi0: bus -1 (PCX5)
acpiprt5 at acpi0: bus -1 (PCX6)
acpiprt6 at acpi0: bus 5 (HUB_)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: PBTN
bios0: ROM list: 0xc0000/0xaa00! 0xcaa00/0x1000 0xcba00/0x1800
0xe8c00/0x7400!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 10)
drm0 at inteldrm0
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: apic 1
int 21 (irq 255)
azalia0: codecs: Realtek ALC260
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci1 at ppb0 bus 32
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 1 int 21
(irq 11)
pci2 at ppb1 bus 63
bge0 at pci2 dev 0 function 0 "Broadcom BCM5752" rev 0x01, BCM5752 A1
(0x6001): apic 1 int 17 (irq 11), address 00:16:35:5f:
bb:6c
brgphy0 at bge0 phy 1: BCM5752 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 1 int 20
(irq 255)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 1 int 18
(irq 255)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 1 int 21
(irq 255)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 1 int 22
(irq 255)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 1 int 20
(irq 255)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci3 at ppb2 bus 5
vr0 at pci3 dev 9 function 0 "VIA VT6105 RhineIII" rev 0x86: apic 1 int 18
(irq 10), address 00:e0:42:97:ff:fa
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 4: OUI
0x004063, model 0x0034
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel
0 configured to compatibility, channel 1 config
ured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configur
ed to native-PCI
pciide1: using apic 1 int 19 (irq 5) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST3500320AS>
wd0: 16-sector PIO, LBA48, 476938MB, 976771055 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
arp: attempt to add entry for 192.168.1.2 on vr0 by 00:27:0e:30:13:41 on
bge0
arp: attempt to add entry for 192.168.1.2 on vr0 by 00:27:0e:30:13:41 on
bge0
arp: attempt to add entry for 192.168.1.2 on vr0 by 00:27:0e:30:13:41 on
bge0
arp: attempt to add entry for 192.168.1.2 on vr0 by 00:27:0e:30:13:41 on
bge0
arp: attempt to add entry for 192.168.1.2 on vr0 by 00:27:0e:30:13:41 on
bge0
arp: attempt to add entry for 192.168.1.2 on vr0 by 00:27:0e:30:13:41 on
bge0
arp: attempt to add entry for 192.168.1.2 on vr0 by 00:27:0e:30:13:41 on
bge0
arp: attempt to add entry for 192.168.1.2 on vr0 by 00:27:0e:30:13:41 on
bge0
arp: attempt to add entry for 192.168.1.2 on vr0 by 00:27:0e:30:13:41 on
bge0
arp: attempt to add entry for 192.168.1.2 on vr0 by 00:27:0e:30:13:41 on
bge0
syncing disks... done
r
OpenBSD 4.9 (GENERIC.MP) #794: Wed Mar 2 07:19:02 MST 2011
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
SH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF
,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
real mem = 259416064 (247MB)
avail mem = 245018624 (233MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/18/05, BIOS32 rev. 0 @ 0xeb660,
SMBIOS rev. 2.4 @ 0xeeb40 (57 entries)
bios0: vendor Hewlett-Packard version "786D1 v01.03" date 05/18/2005
bios0: Hewlett-Packard HP Compaq dc7600 Ultra-slim Desktop
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC ASF! MCFG
acpi0: wakeup devices PCI0(S4) PEG1(S4) PCX1(S4) PCX2(S4) PCX5(S4) PCX6(S4)
HUB_(S4) COM1(S4) COM2(S4) USB1(S1) USB2(S1) USB
3(S1) USB4(S1) EUSB(S1) PBTN(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
SH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF
,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-64
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG1)
acpiprt2 at acpi0: bus 32 (PCX1)
acpiprt3 at acpi0: bus 63 (PCX2)
acpiprt4 at acpi0: bus -1 (PCX5)
acpiprt5 at acpi0: bus -1 (PCX6)
acpiprt6 at acpi0: bus 5 (HUB_)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: PBTN
bios0: ROM list: 0xc0000/0xaa00! 0xcaa00/0x1000 0xcba00/0x1800
0xe8c00/0x7400!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 10)
drm0 at inteldrm0
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: apic 1
int 21 (irq 255)
azalia0: codecs: Realtek ALC260
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci1 at ppb0 bus 32
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 1 int 21
(irq 11)
pci2 at ppb1 bus 63
bge0 at pci2 dev 0 function 0 "Broadcom BCM5752" rev 0x01, BCM5752 A1
(0x6001): apic 1 int 17 (irq 11), address 00:16:35:5f:
bb:6c
brgphy0 at bge0 phy 1: BCM5752 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 1 int 20
(irq 255)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 1 int 18
(irq 255)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 1 int 21
(irq 255)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 1 int 22
(irq 255)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 1 int 20
(irq 255)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci3 at ppb2 bus 5
vr0 at pci3 dev 9 function 0 "VIA VT6105 RhineIII" rev 0x86: apic 1 int 18
(irq 10), address 00:e0:42:97:ff:fa
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 4: OUI
0x004063, model 0x0034
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel
0 configured to compatibility, channel 1 config
ured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configur
ed to native-PCI
pciide1: using apic 1 int 19 (irq 5) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST3500320AS>
wd0: 16-sector PIO, LBA48, 476938MB, 976771055 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
