Hi Misc@,
Can't seem to forward any traffic via em0 and em1, an intel dual-port
gigabit adapter. Dmesg shows that its detected, tried to plug it to
another em's on another machines, no luck. The difference from GENERIC.MP
is that ipmi is enabled.
Thanks,
Insan Praja SW
DMESG;
OpenBSD 4.9-current (GENERIC.MP) #2: Thu May 26 01:51:38 WIT 2011
r...@core01.netaplus.net:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz ("GenuineIntel" 686-class) 2.40
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT
real mem = 2135588864 (2036MB)
avail mem = 2089828352 (1993MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/23/10, BIOS32 rev. 0 @ 0xfd7e1,
SMBIOS rev. 2.5 @ 0x7f6b9000 (55 entries)
bios0: vendor IBM Corp. version "-[GYE144AUS-1.09]-" date 12/16/2010
bios0: IBM 81Y6793
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S5
acpi0: tables DSDT FACP TCPA APIC MCFG SLIC HPET SSDT SSDT ERST DMAR
acpi0: wakeup devices PCIB(S4) POP3(S4) POP1(S4) POP6(S4) POP5(S4)
PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) EHI1(S3) EHI2(S3) PWRB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz ("GenuineIntel" 686-class) 2.40
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz ("GenuineIntel" 686-class) 2.40
GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz ("GenuineIntel" 686-class) 2.40
GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S
SE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0x80000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 36 (PCIB)
acpiprt2 at acpi0: bus 26 (POP3)
acpiprt3 at acpi0: bus -1 (POP1)
acpiprt4 at acpi0: bus -1 (POP6)
acpiprt5 at acpi0: bus 31 (POP5)
acpiprt6 at acpi0: bus 1 (PEX1)
acpiprt7 at acpi0: bus 6 (PEX2)
acpiprt8 at acpi0: bus 11 (PEX3)
acpiprt9 at acpi0: bus 16 (PEX4)
acpiprt10 at acpi0: bus 21 (PEX5)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpicpu2 at acpi0: PSS
acpicpu3 at acpi0: PSS
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x1000
0xca000/0x1000
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xc92/2 spacing 1
cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2394, 2261, 2128, 1995, 1862,
1729, 1596, 1463, 1330, 1197 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Core DMI" rev 0x11
ppb0 at pci0 dev 3 function 0 "Intel Core PCIE" rev 0x11: apic 8 int 16
pci1 at ppb0 bus 26
ppb1 at pci0 dev 5 function 0 "Intel Core PCIE" rev 0x11: apic 8 int 16
pci2 at ppb1 bus 31
em0 at pci2 dev 0 function 0 "Intel I340-T2 (82580)" rev 0x01: apic 8 int
16, address 00:1b:21:90:00:d0
em1 at pci2 dev 0 function 1 "Intel I340-T2 (82580)" rev 0x01: apic 8 int
17, address 00:1b:21:90:00:d1
"Intel Core Management" rev 0x11 at pci0 dev 8 function 0 not configured
"Intel Core Scratch" rev 0x11 at pci0 dev 8 function 1 not configured
"Intel Core Control" rev 0x11 at pci0 dev 8 function 2 not configured
"Intel Core Misc" rev 0x11 at pci0 dev 8 function 3 not configured
"Intel Core QPI Link" rev 0x11 at pci0 dev 16 function 0 not configured
"Intel Core QPI Routing" rev 0x11 at pci0 dev 16 function 1 not configured
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 8 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05: apic 8 int 17
pci3 at ppb2 bus 1
ppb3 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x05: apic 8 int 17
pci4 at ppb3 bus 6
ppb4 at pci4 dev 0 function 0 unknown vendor 0x101b product 0x0452 rev 0x01
pci5 at ppb4 bus 7
vga1 at pci5 dev 0 function 0 vendor "Matrox", unknown product 0x0530 rev
0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb5 at pci0 dev 28 function 5 "Intel 3400 PCIE" rev 0x05: apic 8 int 16
pci6 at ppb5 bus 11
em2 at pci6 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: apic 8
int 17, address 00:21:5e:6b:b7:42
ppb6 at pci0 dev 28 function 6 "Intel 3400 PCIE" rev 0x05: apic 8 int 18
pci7 at ppb6 bus 16
ppb7 at pci0 dev 28 function 7 "Intel 3400 PCIE" rev 0x05: apic 8 int 19
pci8 at ppb7 bus 21
em3 at pci8 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: apic 8
int 19, address 00:21:5e:6b:b7:43
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 8 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb8 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
pci9 at ppb8 bus 36
pcib0 at pci0 dev 31 function 0 "Intel 3420 LPC" rev 0x05
pciide0 at pci0 dev 31 function 2 "Intel 3400 SATA" rev 0x05: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 8 int 19 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WD2502ABYS-23B7A0 39M4511 42C0463IBM>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x05: apic 8 int
18
iic0 at ichiic0
iic0: skipping sensors to avoid ipmi0 interactions
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM registered ECC PC3-10600 with
thermal sensor
spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM registered ECC PC3-10600 with
thermal sensor
pciide1 at pci0 dev 31 function 5 "Intel 3400 SATA" rev 0x05: DMA, channel
0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 8 int 18 for native-PCI interrupt
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
cdce0 at uhub2 port 3 configuration 1 interface 0 "IBM RNDIS/CDC ETHER"
rev 2.00/2.15 addr 3
cdce0: address 02:21:5e:6b:b7:45
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
pf: state key linking mismatch! dir=OUT, if=vlan444, stored af=2, a0:
202.90.195.233:18947, a1: 172.16.3.0:15543, proto=1, found af=2, a0:
172.16.3.0:8, a1: 202.90.195.233:18947, proto=1
pf: state key linking mismatch! dir=OUT, if=vlan444, stored af=2, a0:
202.90.195.233:18947, a1: 172.16.3.0:15543, proto=1, found af=2, a0:
172.16.3.0:8, a1: 202.90.195.233:18947, proto=1
em1: watchdog timeout -- resetting
em0: watchdog timeout -- resetting
em1: watchdog timeout -- resetting
em0: watchdog timeout -- resetting
em0: watchdog timeout -- resetting
em0: watchdog timeout -- resetting
em0: watchdog timeout -- resetting
em0: watchdog timeout -- resetting
em0: watchdog timeout -- resetting
em0: watchdog timeout -- resetting
em0: watchdog timeout -- resetting
em0: watchdog timeout -- resetting
em0: watchdog timeout -- resetting
em0: watchdog timeout -- resetting
em0: watchdog timeout -- resetting
em0: watchdog timeout -- resetting
em0: watchdog timeout -- resetting
em0: watchdog timeout -- resetting
em0: watchdog timeout -- resetting
em0: watchdog timeout -- resetting
em0: watchdog timeout -- resetting
em0: watchdog timeout -- resetting
em0: watchdog timeout -- resetting
em1: watchdog timeout -- resetting
pf: state key linking mismatch! dir=OUT, if=vlan444, stored af=2, a0:
209.161.255.216:4626, a1: 172.16.3.0:15543, proto=1, found af=2, a0:
172.16.3.0:8, a1: 209.161.255.216:4626, proto=1
pf: state key linking mismatch! dir=OUT, if=vlan444, stored af=2, a0:
87.240.238.26:512, a1: 172.16.3.0:15543, proto=1, found af=2, a0:
172.16.3.0:8, a1: 87.240.238.26:512, proto=1
--
Using Opera's revolutionary email client: http://www.opera.com/mail/
