On Sun, May 01, 2011 at 05:57:47PM +0300, Ivo Chutkin wrote:
> Hi Chris,
> It solves the problem and system boots normally.
> Do I need to compile custom kernel and disable inteldrm there?
> Thanks for the help,
config -e /bsd
should allow you to make the disable permanent.
FWIW i just commited a fix to current that should stop the crash at
least.
-0-
> Ivo
> On 1.5.2011 P3. 17:10 Q., Chris Cappuccio wrote:
> >looks like a setup bug in the non-attachment of inteldrm?
> >
> >try disabling inteldrm in the UKC
> >
> >(boot -c
> >disable inteldrm
> >quit)
> >
> >Ivo Chutkin [open...@bgone.net] wrote:
> >>Hello sirs,
> >>I have problem to get this system running.
> >>It is Supermicro P8SCi, dmesg and panic messages are below.
> >>I have three identical systens, I tried 4.8 stable, 4.9 official and
> >>4.9 snapshot, all i386 GENERIC and 4.9 snapshot GENERIC.MP
> >>ACPI enabled and disabled.
> >>The result is the same. I am not skillful enough to diagnose the
> >>problem myself.
> >>
> >>I am glad to help you with any info or tests.
> >>
> >>Thank you for the help.
> >>
> >>Ivo
> >>
>
>>###########################################################################
#############################
> >>panic 4.8
> >>
> >>OpenBSD 4.8-stable (GENERIC) #11: Thu Apr 28 11:24:34 EEST 2011
> >> r...@old.my.domain:/usr/src/sys/arch/i386/compile/GENERIC
> >>cpu0: Intel(R) Pentium(R) 4 CPU 3.20GHz ("GenuineIntel" 686-class) 3.21
GHzI
> >>cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
> >>real mem = 2137550848 (2038MB) / CI Cntrlr
> >>avail mem = 2092621824 (1995MB)6 2659 0C03 USB 1.0/1.1 UHCI
> >>Cntrlr 10
> >>mainbus0 at root A 0C03 USB 1.0/1.1 UHCI
> >>Cntrlr 12
> >>bios0 at mainbus0: AT/286+ BIOS, date 04/07/05, BIOS32 rev. 0 @
> >>0xfa000, SMBIOS rev. 2.3 @ 0xf0800 (49 entries)rom CD
> >>bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 04/07/2005
> >>bios0: Supermicro P8SC8
> >>acpi at bios0 function 0x0 not configured
> >>mpbios0 at bios0: Intel MP Specification 1.4
> >>cpu0 at mainbus0: apid 0 (boot processor)
> >>cpu0: apic clock running at 200MHz
> >>mpbios0: bus 0 is type PCI
> >>mpbios0: bus 1 is type PCI
> >>mpbios0: bus 2 is type PCI
> >>mpbios0: bus 3 is type PCI
> >>mpbios0: bus 4 is type PCI
> >>mpbios0: bus 5 is type PCI
> >>mpbios0: bus 6 is type PCI
> >>mpbios0: bus 7 is type ISA
> >>ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
> >>ioapic0: misconfigured as apic 0, remapped to apid 4
> >>ioapic1 at mainbus0: apid 5 pa 0xfec84400, version 20, 24 pins
> >>pcibios0 at bios0: rev 3.0 @ 0xf0000/0xcb24
> >>pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc9f0/288 (16 entries)
> >>pcibios0: PCI Exclusive IRQs: 5 9 10 12
> >>pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
> >>pcibios0: PCI bus #6 is the last bus
> >>bios0: ROM list: 0xc0000/0x9400! 0xcc000/0x4000! 0xd0000/0x1800
> >>0xd2000/0x1800
> >>pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> >>pchb0 at pci0 dev 0 function 0 "Intel E7221 Host" rev 0x05
> >>ppb0 at pci0 dev 1 function 0 "Intel E7221 PCIE" rev 0x05: apic 4
> >>int 16 (irq 5)
> >>pci_intr_map: bus 0 dev 1 func 0 pin 2; line 5
> >>pci_intr_map: no MP mapping found
> >>pci_intr_map: bus 0 dev 1 func 0 pin 3; line 12
> >>pci_intr_map: no MP mapping found
> >>pci_intr_map: bus 0 dev 1 func 0 pin 4; line 10
> >>pci_intr_map: no MP mapping found
> >>pci1 at ppb0 bus 1
> >>ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
> >>pci2 at ppb1 bus 2
> >>"Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
> >>vga1 at pci0 dev 2 function 0 "Intel E7221 Video" rev 0x05
> >>wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> >>wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> >>intagp at vga1 not configured
> >>inteldrm0 at vga1: apic 4 int 16 (irq 5)
> >>drm0 at inteldrm0: couldn't find agp
> >>uvm_fault(0xd0a05960, 0x0, 0, 3) -> e
> >>kernel: page fault trap, code=0
> >>Stopped at rw_cas_486+0xf: cmpxchgl %ebx,0(%ecx)
> >>rw_cas_486(48,0,d0a05a64,0,0) at rw_cas_486+0xf
> >>rw_enter_write(48,0,d0b75b68,0,d2e14000) at rw_enter_write+0x29
> >>i915_gem_idle(d2e14000,d02094e0,0,d2e0f600,d0b75b74) at
i915_gem_idle+0x20
> >>inteldrm_lastclose(d2e0f600,0,8,0,d09967b8) at inteldrm_lastclose+0x1a
> >>drm_lastclose(d2e0f600,d2e0f600,d0b75bf8,d03e4aab,0) at
drm_lastclose+0x1b
>
>>config_attach(d2e14000,d09919cc,d0b75bf8,d0207cd0,0,2,0,d03eca77,d099b238,5
,d08
> >>24200,d2dfac80,d09acea0,1,14,1,d0b75c05) at config_attach+0x140
> >>drm_attach_pci(d0824200,d0b75d70,1,d2e14000,0) at drm_attach_pci+0xaa
> >>inteldrm_attach(d2d0f900,d2e14000,d0b75d70,d03e4aab,d059b940) at
> >>inteldrm_attac
> >>h+0x40e
> >>config_attach(d2d0f900,d09919f0,d0b75d70,0,258a,6280,628015d9) at
> >>config_attach
> >>+0x140
> >>vga_pci_attach(d2dfde00,d2d0f900,d0b75d70,d03e4aab,d0598b60) at
> >>vga_pci_attach+
> >>0x12b
> >>ddb>
> >>
>
>>###########################################################################
#####################################################
> >>panic 4.9
> >>
> >>OpenBSD 4.9 (GENERIC) #671: Wed Mar 2 07:09:00 MST 2011
> >> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> >>cpu0: Intel(R) Pentium(R) 4 CPU 3.20GHz ("GenuineIntel" 686-class) 3.21
GHz
> >>cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
> >>real mem = 2137550848 (2038MB)
> >>avail mem = 2092449792 (1995MB)
> >>mainbus0 at root
> >>bios0 at mainbus0: AT/286+ BIOS, date 04/07/05, BIOS32 rev. 0 @
> >>0xfa000, SMBIOS rev. 2.3 @ 0xf0800 (49 entries)
> >>bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 04/07/2005
> >>bios0: Supermicro P8SC8
> >>acpi at bios0 function 0x0 not configured
> >>mpbios0 at bios0: Intel MP Specification 1.1
> >>cpu0 at mainbus0: apid 0 (boot processor)
> >>cpu0: apic clock running at 200MHz
> >>mpbios0: bus 0 is type PCI
> >>mpbios0: bus 1 is type PCI
> >>mpbios0: bus 2 is type PCI
> >>mpbios0: bus 3 is type PCI
> >>mpbios0: bus 4 is type PCI
> >>mpbios0: bus 5 is type PCI
> >>mpbios0: bus 6 is type PCI
> >>mpbios0: bus 7 is type ISA
> >>ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
> >>ioapic0: misconfigured as apic 0, remapped to apid 4
> >>ioapic1 at mainbus0: apid 5 pa 0xfec84400, version 20, 24 pins
> >>pcibios0 at bios0: rev 3.0 @ 0xf0000/0xcb24
> >>pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc9f0/288 (16 entries)
> >>pcibios0: PCI Exclusive IRQs: 5 7 10 12
> >>pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
> >>pcibios0: PCI bus #6 is the last bus
> >>bios0: ROM list: 0xc0000/0x9400! 0xcc000/0x4000! 0xd0000/0x1800
> >>0xd2000/0x1800
> >>pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> >>pchb0 at pci0 dev 0 function 0 "Intel E7221 Host" rev 0x05
> >>ppb0 at pci0 dev 1 function 0 "Intel E7221 PCIE" rev 0x05: apic 4
> >>int 16 (irq 5)
> >>pci1 at ppb0 bus 1
> >>ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
> >>pci2 at ppb1 bus 2
> >>"Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
> >>vga1 at pci0 dev 2 function 0 "Intel E7221 Video" rev 0x05
> >>wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> >>wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> >>intagp at vga1 not configured
> >>inteldrm0 at vga1: apic 4 int 16 (irq 5)
> >>drm0 at inteldrm0: couldn't find agp
> >>uvm_fault(0xd0a2c8c0, 0x0, 0, 3) -> e
> >>kernel: page fault trap, code=0
> >>Stopped at rw_cas_486+0xf: cmpxchgl %ebx,0(%ecx)
> >>rw_cas_486(48,0,d0a2c9c4,0,0) at rw_cas_486+0xf
> >>rw_enter_write(48,0,d0ba0b58,0,d2e3f000) at rw_enter_write+0x29
> >>i915_gem_idle(d2e3f000,d0209460,0,d2e3a600,d0ba0b64) at
i915_gem_idle+0x20
> >>inteldrm_lastclose(d2e3a600,0,8,0,d09bb8d8) at inteldrm_lastclose+0x1a
> >>drm_lastclose(d2e3a600,d2e3a600,d0ba0be8,d03e49bb,0) at
drm_lastclose+0x1b
>
>>config_attach(d2e3f000,d09b69cc,d0ba0be8,d0207c50,0,2,0,d03ecb07,d09c0480,5
,d08
> >>42ca0,d2e24c80,d09d1e60,1,14,1,d0ba0c05) at config_attach+0x140
> >>drm_attach_pci(d0842ca0,d0ba0d70,1,d2e3f000,d2e24f40) at
drm_attach_pci+0xaa
> >>inteldrm_attach(d2d39900,d2e3f000,d0ba0d70,d03e49bb,d05a6d90) at
> >>inteldrm_attac
> >>h+0x417
> >>config_attach(d2d39900,d09b69f0,d0ba0d70,0,258a,6280,628015d9) at
> >>config_attach
> >>+0x140
> >>vga_pci_attach(d2e27e00,d2d39900,d0ba0d70,d03e49bb,d05a3bf0) at
> >>vga_pci_attach+
> >>0x12b
> >>ddb>
> >>
>
>>###########################################################################
##
> >>panic 4.9 snapshot
> >>
> >>OpenBSD 4.9-current (GENERIC) #64: Wed Apr 27 17:34:55 MDT 2011
> >> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> >>cpu0: Intel(R) Pentium(R) 4 CPU 3.20GHz ("GenuineIntel" 686-class) 3.21
GHz
> >>cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
> >>real mem = 2137550848 (2038MB)
> >>avail mem = 2092433408 (1995MB)
> >>mainbus0 at root
> >>bios0 at mainbus0: AT/286+ BIOS, date 04/07/05, BIOS32 rev. 0 @
> >>0xfa000, SMBIOS rev. 2.3 @ 0xf0800 (49 entries)
> >>bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 04/07/2005
> >>bios0: Supermicro P8SC8
> >>acpi at bios0 function 0x0 not configured
> >>mpbios0 at bios0: Intel MP Specification 1.1
> >>cpu0 at mainbus0: apid 0 (boot processor)
> >>cpu0: apic clock running at 200MHz
> >>mpbios0: bus 0 is type PCI
> >>mpbios0: bus 1 is type PCI
> >>mpbios0: bus 2 is type PCI
> >>mpbios0: bus 3 is type PCI
> >>mpbios0: bus 4 is type PCI
> >>mpbios0: bus 5 is type PCI
> >>mpbios0: bus 6 is type PCI
> >>mpbios0: bus 7 is type ISA
> >>ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
> >>ioapic0: misconfigured as apic 0, remapped to apid 4
> >>ioapic1 at mainbus0: apid 5 pa 0xfec84400, version 20, 24 pins
> >>pcibios0 at bios0: rev 3.0 @ 0xf0000/0xcb24
> >>pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc9f0/288 (16 entries)
> >>pcibios0: PCI Exclusive IRQs: 5 7 10 12
> >>pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
> >>pcibios0: PCI bus #6 is the last bus
> >>bios0: ROM list: 0xc0000/0x9400! 0xcc000/0x4000! 0xd0000/0x1800
> >>0xd2000/0x1800
> >>pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> >>pchb0 at pci0 dev 0 function 0 "Intel E7221 Host" rev 0x05
> >>ppb0 at pci0 dev 1 function 0 "Intel E7221 PCIE" rev 0x05: apic 4 int 16
> >>pci1 at ppb0 bus 1
> >>ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
> >>pci2 at ppb1 bus 2
> >>"Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
> >>vga1 at pci0 dev 2 function 0 "Intel E7221 Video" rev 0x05
> >>wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> >>wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> >>intagp at vga1 not configured
> >>inteldrm0 at vga1: apic 4 int 16
> >>drm0 at inteldrm0: couldn't find agp
> >>uvm_fault(0xd0a303e0, 0x0, 0, 3) -> e
> >>kernel: page fault trap, code=0
> >>Stopped at rw_cas_486+0xf: cmpxchgl %ebx,0(%ecx)
> >>rw_cas_486(48,0,d0a30504,0,0) at rw_cas_486+0xf
> >>rw_enter_write(48,0,d0ba4b58,0,d2e43000) at rw_enter_write+0x29
> >>i915_gem_idle(d2e43000,d02097a0,0,d2e3e600,d0ba4b64) at
i915_gem_idle+0x20
> >>inteldrm_lastclose(d2e3e600,0,8,0,d09c08f8) at inteldrm_lastclose+0x1a
> >>drm_lastclose(d2e3e600,d2e3e600,d0ba4be8,d03e4ebb,0) at
drm_lastclose+0x1b
>
>>config_attach(d2e43000,d09bb9cc,d0ba4be8,d0207f90,0,2,0,d03ed2c7,d09c5464,5
,d08
> >>44cc0,d2e28c80,d09d6e80,1,14,1,d0ba4c05) at config_attach+0x140
> >>drm_attach_pci(d0844cc0,d0ba4d70,1,d2e43000,d2e28f40) at
drm_attach_pci+0xaa
> >>inteldrm_attach(d2d3d900,d2e43000,d0ba4d70,d03e4ebb,d05a7fc0) at
> >>inteldrm_attac
> >>h+0x417
> >>config_attach(d2d3d900,d09bb9f0,d0ba4d70,0,258a,6280,628015d9) at
> >>config_attach
> >>+0x140
> >>vga_pci_attach(d2e2be00,d2d3d900,d0ba4d70,d03e4ebb,d05a4e00) at
> >>vga_pci_attach+
> >>0x12b
> >>ddb>
> >>
>
>>###########################################################################
########
> >>panic 4.9 snapshot GENERIC.MP
> >>
>
>>###########################################################################
####################################
> >>dmesg 4.9
> >>
> >>OpenBSD 4.9 (RAMDISK_CD) #329: Wed Mar 2 07:27:01 MST 2011
> >> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> >>cpu0: Intel(R) Pentium(R) 4 CPU 3.20GHz ("GenuineIntel" 686-class) 3.21
GHz
> >>cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
> >>real mem = 2137550848 (2038MB)
> >>avail mem = 2095611904 (1998MB)
> >>mainbus0 at root
> >>bios0 at mainbus0: AT/286+ BIOS, date 04/07/05, BIOS32 rev. 0 @
> >>0xfa000, SMBIOS rev. 2.3 @ 0xf0800 (49 entries)
> >>bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 04/07/2005
> >>bios0: Supermicro P8SC8
> >>acpi at bios0 function 0x0 not configured
> >>mpbios at bios0 function 0x0 not configured
> >>pcibios0 at bios0: rev 3.0 @ 0xf0000/0xcb24
> >>pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc9f0/288 (16 entries)
> >>pcibios0: PCI Exclusive IRQs: 5 7 10 12
> >>pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
> >>pcibios0: PCI bus #6 is the last bus
> >>bios0: ROM list: 0xc0000/0x9400! 0xcc000/0x4000! 0xd0000/0x1800
> >>0xd2000/0x1800
> >>cpu0 at mainbus0: (uniprocessor)
> >>pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> >>pchb0 at pci0 dev 0 function 0 "Intel E7221 Host" rev 0x05
> >>ppb0 at pci0 dev 1 function 0 "Intel E7221 PCIE" rev 0x05: irq 5
> >>pci1 at ppb0 bus 1
> >>ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
> >>pci2 at ppb1 bus 2
> >>"Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
> >>vga1 at pci0 dev 2 function 0 "Intel E7221 Video" rev 0x05
> >>wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> >>ppb2 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: irq 5
> >>pci3 at ppb2 bus 3
> >>ppb3 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x03: irq 12
> >>pci4 at ppb3 bus 4
> >>bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750
> >>B1 (0x4101): irq 12, address 00:30:48:84:51:74
> >>brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> >>ppb4 at pci0 dev 28 function 3 "Intel 82801FB PCIE" rev 0x03: irq 10
> >>pci5 at ppb4 bus 5
> >>bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750
> >>B1 (0x4101): irq 10, address 00:30:48:84:51:75
> >>brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> >>uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 7
> >>uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 10
> >>uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 12
> >>uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 5
> >>ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 7
> >>usb0 at ehci0: USB revision 2.0
> >>uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> >>ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd3
> >>pci6 at ppb5 bus 6
> >>pcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03
> >>pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
> >>channel 0 configured to compatibility, channel 1 configured to
> >>compatibility
> >>atapiscsi0 at pciide0 channel 0 drive 0
> >>scsibus0 at atapiscsi0: 2 targets
> >>cd0 at scsibus0 targ 0 lun 0:<TEAC, CD-224E, 1.9A> ATAPI 5/cdrom
removable
> >>cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> >>pciide0: channel 1 disabled (no drives)
> >>pciide1 at pci0 dev 31 function 2 "Intel 82801FR SATA" rev 0x03:
> >>DMA, channel 0 configured to native-PCI, channel 1 configured to
> >>native-PCI
> >>pciide1: using irq 10 for native-PCI interrupt
> >>wd0 at pciide1 channel 0 drive 0:<ST380817AS>
> >>wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
> >>wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
> >>"Intel 82801FB SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
> >>usb1 at uhci0: USB revision 1.0
> >>uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >>usb2 at uhci1: USB revision 1.0
> >>uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >>usb3 at uhci2: USB revision 1.0
> >>uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >>usb4 at uhci3: USB revision 1.0
> >>uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >>isa0 at pcib0
> >>isadma0 at isa0
> >>com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> >>com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> >>pckbc0 at isa0 port 0x60/5
> >>pckbd0 at pckbc0 (kbd slot)
> >>pckbc0: using irq 1 for kbd slot
> >>wskbd0 at pckbd0: console keyboard, using wsdisplay0
> >>npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> >>fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> >>fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> >>biomask ffe5 netmask ffe5 ttymask ffff
> >>rd0: fixed, 3872 blocks
> >>softraid0 at root
> >>root on rd0a swap on rd0b dump on rd0b
> >>
> >>###################################################################
> >>dmesg 4.9 snapshot
> >>
> >>OpenBSD 4.9-current (RAMDISK_CD) #55: Wed Apr 27 17:50:34 MDT 2011
> >> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> >>cpu0: Intel(R) Pentium(R) 4 CPU 3.20GHz ("GenuineIntel" 686-class) 3.21
GHz
> >>cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
> >>real mem = 2137550848 (2038MB)
> >>avail mem = 2095595520 (1998MB)
> >>mainbus0 at root
> >>bios0 at mainbus0: AT/286+ BIOS, date 04/07/05, BIOS32 rev. 0 @
> >>0xfa000, SMBIOS rev. 2.3 @ 0xf0800 (49 entries)
> >>bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 04/07/2005
> >>bios0: Supermicro P8SC8
> >>acpi at bios0 function 0x0 not configured
> >>mpbios at bios0 function 0x0 not configured
> >>pcibios0 at bios0: rev 3.0 @ 0xf0000/0xcb24
> >>pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc9f0/288 (16 entries)
> >>pcibios0: PCI Exclusive IRQs: 5 7 10 12
> >>pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
> >>pcibios0: PCI bus #6 is the last bus
> >>bios0: ROM list: 0xc0000/0x9400! 0xcc000/0x4000! 0xd0000/0x1800
> >>0xd2000/0x1800
> >>cpu0 at mainbus0: (uniprocessor)
> >>pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> >>pchb0 at pci0 dev 0 function 0 "Intel E7221 Host" rev 0x05
> >>ppb0 at pci0 dev 1 function 0 "Intel E7221 PCIE" rev 0x05: irq 5
> >>pci1 at ppb0 bus 1
> >>ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
> >>pci2 at ppb1 bus 2
> >>"Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured
> >>vga1 at pci0 dev 2 function 0 "Intel E7221 Video" rev 0x05
> >>wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> >>ppb2 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: irq 5
> >>pci3 at ppb2 bus 3
> >>ppb3 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x03: irq 12
> >>pci4 at ppb3 bus 4
> >>bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750
> >>B1 (0x4101): irq 12, address 00:30:48:84:51:74
> >>brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> >>ppb4 at pci0 dev 28 function 3 "Intel 82801FB PCIE" rev 0x03: irq 10
> >>pci5 at ppb4 bus 5
> >>bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750
> >>B1 (0x4101): irq 10, address 00:30:48:84:51:75
> >>brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> >>uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 7
> >>uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 10
> >>uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 12
> >>uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 5
> >>ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 7
> >>usb0 at ehci0: USB revision 2.0
> >>uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> >>ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd3
> >>pci6 at ppb5 bus 6
> >>pcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03
> >>pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
> >>channel 0 configured to compatibility, channel 1 configured to
> >>compatibility
> >>atapiscsi0 at pciide0 channel 0 drive 0
> >>scsibus0 at atapiscsi0: 2 targets
> >>cd0 at scsibus0 targ 0 lun 0:<TEAC, CD-224E, 1.9A> ATAPI 5/cdrom
removable
> >>cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> >>pciide0: channel 1 disabled (no drives)
> >>pciide1 at pci0 dev 31 function 2 "Intel 82801FR SATA" rev 0x03:
> >>DMA, channel 0 configured to native-PCI, channel 1 configured to
> >>native-PCI
> >>pciide1: using irq 10 for native-PCI interrupt
> >>wd0 at pciide1 channel 0 drive 0:<ST380817AS>
> >>wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
> >>wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
> >>"Intel 82801FB SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
> >>usb1 at uhci0: USB revision 1.0
> >>uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >>usb2 at uhci1: USB revision 1.0
> >>uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >>usb3 at uhci2: USB revision 1.0
> >>uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >>usb4 at uhci3: USB revision 1.0
> >>uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >>isa0 at pcib0
> >>isadma0 at isa0
> >>com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> >>com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> >>pckbc0 at isa0 port 0x60/5
> >>pckbd0 at pckbc0 (kbd slot)
> >>pckbc0: using irq 1 for kbd slot
> >>wskbd0 at pckbd0: console keyboard, using wsdisplay0
> >>npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> >>fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> >>fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> >>rd0: fixed, 3872 blocks
> >>softraid0 at root
> >>root on rd0a swap on rd0b dump on rd0b
>
--
The sooner all the animals are dead, the sooner we'll find their money.
-- Ed Bluestone, "The National Lampoon"
