On Sat, Apr 30, 2011 at 7:23 AM, Nico Kadel-Garcia <nka...@gmail.com> wrote: > Thanks for the thought. I was unclear: I wanted the model name, not > the manufacturer's name.
I've had good experience with the Dell R415s and their H700 RAID controllers. Everything seems well supported, and they're fast and cheap. dmesg below. Only caveat is that the RAID controller consumes the only PCIe slot. We've just purchased some R610s for use as OpenBSD routers (as they have two PCIe slots and four onboard NICs) and Dell will factory-install an (apparently) OpenBSD-compatible Intel X520 SFP+ dual-10GE card at a reasonable price, and supply appropriate SFP+ modules. Cheers, Patrick bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x2600 0xcb800/0x6000 0xec000/0x4000! ipmi at mainbus0 not configured pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "ATI RD890 PCIE" rev 0x02 ppb0 at pci0 dev 2 function 0 "ATI RD890 PCIE" rev 0x00: apic 7 int 28 (irq 255) pci1 at ppb0 bus 1 mfi0 at pci1 dev 0 function 0 "Symbios Logic MegaRAID SAS2108 GEN2" rev 0x05: apic 7 int 0 (irq 14), Dell PERC H700 Adapter mfi0: logical drives 1, version 12.10.0-0025, 1024MB RAM scsibus0 at mfi0: 1 targets sd0 at scsibus0 targ 0 lun 0: <DELL, PERC H700, 2.10> SCSI3 0/direct fixed sd0: 47104MB, 512 bytes/sec, 96468992 sec total ppb1 at pci0 dev 9 function 0 "ATI RD890 PCIE" rev 0x00: apic 7 int 29 (irq 255) pci2 at ppb1 bus 2 bnx0 at pci2 dev 0 function 0 "Broadcom BCM5716" rev 0x20: apic 7 int 24 (irq 14) bnx1 at pci2 dev 0 function 1 "Broadcom BCM5716" rev 0x20: apic 7 int 25 (irq 11) ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 6 int 22 (irq 15), AHCI 1.1 scsibus1 at ahci0: 32 targets ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 6 int 16 (irq 14), version 1.0, legacy support ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 6 int 16 (irq 14), version 1.0, legacy support ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 6 int 17 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 6 int 18 (irq 10), version 1.0, legacy support ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 6 int 18 (irq 10), version 1.0, legacy support ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 6 int 19 (irq 6) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3d: SMI iic0 at piixpm0 pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 6 int 16 (irq 14) for native-PCI interrupt atapiscsi0 at pciide0 channel 0 drive 0 scsibus2 at atapiscsi0: 2 targets cd0 at scsibus2 targ 0 lun 0: <TEAC, DVD-ROM DV-28SW, R.2A> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00 ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00 pci3 at ppb2 bus 3 vga1 at pci3 dev 4 function 0 "Matrox MGA G200eW" rev 0x0a wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00 pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00 pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00 km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00 pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00 usb2 at ohci0: USB revision 1.0 uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci1: USB revision 1.0 uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb4 at ohci2: USB revision 1.0 uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb5 at ohci3: USB revision 1.0 uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support uhub6 at uhub0 port 3 "Standard Microsystems product 0x2514" rev 2.00/0.00 addr 2 uhidev0 at uhub2 port 2 configuration 1 interface 0 "Avocent USB Composite Device-0" rev 1.10/0.00 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub2 port 2 configuration 1 interface 1 "Avocent USB Composite Device-0" rev 1.10/0.00 addr 2 uhidev1: iclass 3/1 ums0 at uhidev1 ums0: X report 0x0002 not supported softraid0 at root root on sd0a swap on sd0b dump on sd0b bnx0: address 60:eb:69:6f:0d:e5 brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 bnx1: address 60:eb:69:6f:0d:e6 brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 -- http://www.labyrinthdata.net.au - WA Backup, Web and VPS Hosting
