On Wed, 16 Mar 2011 10:12:22 -0600 Theo de Raadt wrote:
> > I have exactly same motherboard with Phenom II X4. For me, it helps
> > when I disable acpi. ("boot -c" & "disable acpi" during the boot)
...
> > acpi at bios0 not configured
> > mpbios0 at bios0: Intel MP Specification 1.4
> > ...
>
> Trusting mpbios to be correct about your interrupt routing, on a
> machine built today?
>
> I doubt it.
Probably not, but it allows you to boot the system.
I updated BIOS to the latest available and booted the latest 4.9-current
bsd.mp kernel.
Booting with ACPI enabled still stops after acpihpet. I think I debugged
the problem at some point last year and found that acpi code went into
busyloop and never exited, but I already forgot the details.
acpidump and dmesg are here:
http://iki.fi/tero.koskinen/openbsd/acpi1/
Note: acpidump above is taken from system with 4.9-current kernel
and 4.9-beta userland. I haven't had time to upgrade to the latest
4.9-current yet.
dmesg (with acpi disabled) also below:
OpenBSD 4.9-current (GENERIC.MP) #835: Tue Mar 15 19:54:03 MDT 2011
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3487105024 (3325MB)
avail mem = 3380252672 (3223MB)
User Kernel Config
UKC> disable acpi
337 acpi0 disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x9f400 (68 entries)
bios0: vendor American Megatrends Inc. version "2105" date 07/23/2010
bios0: ASUSTeK Computer INC. M4A785TD-V EVO
acpi at bios0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Phenom(tm) II X4 965 Processor, 3415.75 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Phenom(tm) II X4 965 Processor, 3415.23 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu2 at mainbus0: apid 2 (application processor)
cpu2: AMD Phenom(tm) II X4 965 Processor, 3415.23 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu3 at mainbus0: apid 3 (application processor)
cpu3: AMD Phenom(tm) II X4 965 Processor, 3415.23 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line
16-way L2 cache
cpu3: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu3: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type PCI
mpbios0: bus 2 is type PCI
mpbios0: bus 3 is type PCI
mpbios0: bus 4 is type PCI
mpbios0: bus 5 is type ISA
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD RS780 Host" rev 0x00
ppb0 at pci0 dev 2 function 0 "AMD RS780 PCIE" rev 0x00: apic 4 int 18 (irq 10)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon HD 4890" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 4 int 18 (irq 10)
drm0 at radeondrm0
azalia0 at pci1 dev 0 function 1 "ATI Radeon HD 48xx HD Audio" rev 0x00: apic 4
int 19 (irq 10)
azalia0: no supported codecs
azalia0: initialization failure, detaching
ppb1 at pci0 dev 4 function 0 "AMD RS780 PCIE" rev 0x00: apic 4 int 16 (irq 11)
pci2 at ppb1 bus 2
vendor "Oxford", unknown product 0xc158 (class communications subclass serial,
rev 0x00) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 10 function 0 "AMD RS780 PCIE" rev 0x00: apic 4 int 18 (irq 10)
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800),
apic 4 int 18 (irq 10), address e0:cb:4e:ba:49:d2
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 22 (irq
10), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Kingston SSDNow, B090> SCSI3 0/direct fixed
sd0: 61057MB, 512 bytes/sec, 125045424 sec total
sd1 at scsibus0 targ 1 lun 0: <ATA, WDC WD1500HLFS-0, 04.0> SCSI3 0/direct fixed
sd1: 143089MB, 512 bytes/sec, 293046768 sec total
sd2 at scsibus0 targ 2 lun 0: <ATA, WDC WD1500HLFS-0, 04.0> SCSI3 0/direct fixed
sd2: 143089MB, 512 bytes/sec, 293046768 sec total
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 16 (irq
11), version 1.0, legacy support
ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 4 int 16 (irq
11), version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 (irq
11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18 (irq
10), version 1.0, legacy support
ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 4 int 18 (irq
10), version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 19 (irq
10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3c: SMI
iic0 at piixpm0
iic0: addr 0x20 01=19 02=24 03=2e 04=00 05=00 06=00 07=00 08=00 09=00 0a=10
0b=10 0c=10 0d=10 0e=29 0f=8c 10=3d 11=00 12=00 13=00 14=0a 15=0a 16=39 17=a4
18=e0 1a=ae 1b=a4 1c=b3 1d=00 1e=0c 1f=01 20=01 21=01 22=01 23=bb 3e=bb b2=09
b3=27 b5=09 words 00=ff19 01=1924 02=242e 03=2e00 04=0000 05=0000 06=0000
07=0000
spdmem0 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600
pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GH22LS50, TL02> ATAPI 5/cdrom
removable
wd0 at pciide0 channel 1 drive 1: <ST3500418AS>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
wd0(pciide0:1:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 4 int 16
(irq 11)
azalia1: codecs: VIA/0x0397
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci4 at ppb3 bus 4
em0 at pci4 dev 7 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: apic 4 int
22 (irq 10), address 00:1b:21:54:4b:8d
"VIA VT6306 FireWire" rev 0xc0 at pci4 dev 8 function 0 not configured
ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 4 int 18 (irq
10), version 1.0, legacy support
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8712F rev 8, EC port 0x290
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
rum0 at uhub0 port 1 "Ralink Technology RT2573" rev 2.00/0.01 addr 2
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:0e:2e:c4:a9:de
ulpt0 at uhub2 port 2 configuration 1 interface 0 "Brother HL-1450 series" rev
1.00/1.00 addr 2
ulpt0: using bi-directional mode
uhidev0 at uhub3 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/43.01 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub3 port 3 configuration 1 interface 0 "BTC USB Multimedia
Keyboard" rev 1.10/1.00 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub3 port 3 configuration 1 interface 1 "BTC USB Multimedia
Keyboard" rev 1.10/1.00 addr 3
uhidev2: iclass 3/0, 3 report ids
uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=3, output=0, feature=0
uhid2 at uhidev2 reportid 3: input=3, output=0, feature=8
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 1 targets
sd3 at scsibus3 targ 0 lun 0: <OPENBSD, SR RAID 0, 004> SCSI2 0/direct fixed
sd3: 286172MB, 512 bytes/sec, 586082048 sec total
root on sd0a swap on sd0b dump on sd0b
--
Tero Koskinen <tero.koski...@iki.fi>
