Hello misc, I have a network with wireless and bridge mode on AP's.
I put IP address on both sides and ping it normally. On left side have a notebook with windows vista and smb share and on right side have other notebook with same configuration. When I try copy the file on smb, the speed is 10MB/s, it is very fast, I copied files with 50mb size, 500 and 2gb . realy, it is very fast. this test I do on both sides But now, begin my problems. On both sides I have a OpenBSD 4.8 i386. If I set on both side ifconfig <iface> media 100baseTX mediaopt full-duplex , my speed down dramatical, +/- the download of same file is 25kb/s , but if set ifconfig <iface> media autoselect The speed is 1,8mb/s The problem is the speedy, I'm rebelled ! As the fu* of windows is 10x more fast that my OpenBSD box! I cannot believe in this ! what are occur ? I replaced my ethernet on both sides, but I cannot have the same speed as in test. I tried many configuration with IFCONFIG media .... , with and without pf enabled and the same thing. BOX 1 ; ( offboard ethernet ) # dmesg | grep ste0 ste0 at pci3 dev 1 function 0 "Sundance ST201" rev 0x31: apic 2 int 16 (irq 10), address aa:bb:cc:dd:ee:ff ukphy0 at ste0 phy 0: Generic IEEE 802.3u media interface, rev. 0: OUI 0x0090c3, model 0x0018 BOX 2 : ( offboard ethernet ) # dmesg | greo ste1 ste1 at pci0 dev 9 function 0 "Sundance ST201" rev 0x31: irq 11, address gg:hh:ii:jj:ll:kk ukphy1 at ste1 phy 0: Generic IEEE 802.3u media interface, rev. 0: OUI 0x0090c3, model 0x0018 The test that i do with OpenBSD was: Box 1: apachectl start Box 2: wget http://ip_address/instal48-i386.iso Tried too: scp ... on both sides, the speed is the same Please, someone can indicate the right direction to resove this ? Regards,, Guilherme Hakme