Going back to your network layout, does your obsd-3.6 box know how to get your wireless clients?
If it's like this: internet <-> obsd-3.6 <-> rl0/obsd-3.8/wi0 <-> wireless clients then on the obsd-3.6 box you need to add a route to the 192.168.2.x network. Greg On 10/11/05, man Chan <[EMAIL PROTECTED]> wrote: > > Thanks. I find out that I have to setup a dns and pf > at the AP in order to allowed the clients (window, > obsd....) to access the internet. However, it is > plain text mode. Any idea (I am new to this sort of > thing wireless setup). here is my configuration: > > ifconfig out put > -------------------- > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu > 33224 > groups: lo > inet 127.0.0.1 <http://127.0.0.1> netmask 0xff000000 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 > rl0: > flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> > mtu 1500 > lladdr 00:e0:4c:3b:a9:ed > groups: egress > media: Ethernet autoselect (100baseTX > full-duplex) > status: active > inet 192.168.1.120 <http://192.168.1.120> netmask 0xffffff00 > broadcast 192.168.1.255 <http://192.168.1.255> > inet6 fe80::2e0:4cff:fe3b:a9ed%rl0 prefixlen > 64 scopeid 0x1 > pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33224 > pfsync0: flags=0<> mtu 1348 > enc0: flags=0<> mtu 1536 > wi0: > flags=8d43<UP,BROADCAST,RUNNING,PROMISC,OACTIVE,SIMPLEX,MULTICAST> > mtu 1500 > lladdr 00:05:5d:d9:84:6c > media: IEEE802.11 autoselect hostap (DS2) > status: active > ieee80211: nwid obsd-group 2dBm (auto) > inet 192.168.2.1 <http://192.168.2.1> netmask 0xffffff00 broadcast > 192.168.2.255 <http://192.168.2.255> > inet6 fe80::205:5dff:fed9:846c%wi0 prefixlen > 64 scopeid 0x6 > bridge0: flags=41<UP,RUNNING> mtu 1500 > groups: bridge > ---------------------------- > > wicontrol output > ================= > NIC serial number: [ 99SA01000000 > ] > Station name: [ air ] > SSID for IBSS creation: [ obsd-group ] > Current netname (SSID): [ obsd-group ] > Desired netname (SSID): [ obsd-group ] > Current BSSID: [ > 00:05:5d:d9:84:6c ] > Channel list: [ 2047 ] > IBSS channel: [ 6 ] > Current channel: [ 6 ] > Comms quality/signal/noise: [ 0 81 27 ] > Promiscuous mode: [ Off ] > Process 802.11b Frame: [ Off ] > Port type (1=BSS, 3=ad-hoc, 6=Host AP): [ 6 ] > MAC address: [ > 00:05:5d:d9:84:6c ] > TX rate (selection): [ 3 ] > TX rate (actual speed): [ 2 ] > Maximum data length: [ 2304 ] > RTS/CTS handshake threshold: [ 2347 ] > Create IBSS: [ On ] > Antenna diversity (0=auto,1=pri,2=aux): [ ] > Microwave oven robustness: [ On ] > Roaming mode(1=firm,3=disable): [ 1 ] > Access point density: [ 1 ] > Power Management: [ Off ] > Max sleep time: [ 100 ] > Enhanced Security mode: [ ] > Intersil Prism2-based card: [ 1 ] > Card info: [ PRISM2.5 > ISL3873, Firmware 1.3.4 ] > Encryption: [ Off ] > Encryption algorithm: [ Firmware WEP > ] > Authentication type > (1=OpenSys, 2=Shared Key): [ 1 ] > TX encryption key: [ 1 ] > Encryption keys: [ > abcdef1234567 ][ ][ ][ ] > air# cat /tmp/a > NIC serial number: [ 99SA01000000 > ] > Station name: [ air ] > SSID for IBSS creation: [ obsd-group ] > Current netname (SSID): [ obsd-group ] > Desired netname (SSID): [ obsd-group ] > Current BSSID: [ > 00:05:5d:d9:84:6c ] > Channel list: [ 2047 ] > IBSS channel: [ 6 ] > Current channel: [ 6 ] > Comms quality/signal/noise: [ 0 81 27 ] > Promiscuous mode: [ Off ] > Process 802.11b Frame: [ Off ] > Port type (1=BSS, 3=ad-hoc, 6=Host AP): [ 6 ] > MAC address: [ > 00:05:5d:d9:84:6c ] > TX rate (selection): [ 3 ] > TX rate (actual speed): [ 2 ] > Maximum data length: [ 2304 ] > RTS/CTS handshake threshold: [ 2347 ] > Create IBSS: [ On ] > Antenna diversity (0=auto,1=pri,2=aux): [ ] > Microwave oven robustness: [ On ] > Roaming mode(1=firm,3=disable): [ 1 ] > Access point density: [ 1 ] > Power Management: [ Off ] > Max sleep time: [ 100 ] > Enhanced Security mode: [ ] > Intersil Prism2-based card: [ 1 ] > Card info: [ PRISM2.5 > ISL3873, Firmware 1.3.4 ] > Encryption: [ Off ] > Encryption algorithm: [ Firmware WEP > ] > Authentication type > (1=OpenSys, 2=Shared Key): [ 1 ] > TX encryption key: [ 1 ] > Encryption keys: [ > abcdef1234567 ][ ][ ][ ] > ================================= > > sysctl.conf > ++++++++++++ > net.inet.ip.forwarding=1 > net.inet6.ip6.forwarding=1 > > > Thomas <[EMAIL PROTECTED]> ;!!G > > > On 10/11/05, man Chan <[EMAIL PROTECTED]> > > wrote: > > > > > > Hello, > > > > > > I recently tried to setup a wireless AP machine > > using > > > openbsd-3.8 (i386) without any luck. I tried to > > > search the google to find out the way to solve my > > > problem with no success. Can anyone show me the > > > direction to do it ? Thanks for your time . > > > > > > clarence > > > > > > ps. > > > > > > 1. the hardware is Dlink 802.11b prism2.5 > > > 2. I can use wicontrol -l to list the connected > > > machine. > > > 3. I can use ssh from the window-xp to the AP > > machine > > > 4. here is the diagram of my case > > > > > > internet <-- adsl -> obsd-3.6 <- switch -> wired > > > clients > > > | > > > ----> AP (obsd3.8) > > > | > > > ----> wireless > > > clients > > > > > > We need much much more info than that. IP configs, > > output of ifconfig and > > wicontrol from the AP, sysctl.conf from the AP, etc. > > > > Greg > > > > > _______________________________________ > 7Q'Y.I&,(l7s email 3q*>!H > $U8| Yahoo! Messenger http://messenger.yahoo.com.hk
