nv will do 1600x1200 - I run a geforce 2 go (dell inspiron 8100) with
openbsd 3.7 generic at that resolution.
Need to see your xorg.conf and xorg log
Reading the nv man page I'm not sure it supports the Go5600..?
On 06/10/05, stefan hoffmann <[EMAIL PROTECTED]> wrote:
> hi,
>
> is there anybody out there who has a running setup of xorg for a Nvidia
> Go5600 with a screen resolution of 1600x1200x32 and can give me some hints?
>
> As far as i can see, the nv generic driver is not capable of this mode.
>
> btw, i'd like to get my Vaio PCG-GRT796SP to run X.
>
>
> --> ste5an <--
>
> --
> OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 2.50GHz ("GenuineIntel"
> 686-class) 2.51 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
> real mem = 1071161344 (1046056K)
> avail mem = 970919936 (948164K)
> using 4278 buffers containing 53661696 bytes (52404K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(db) BIOS, date 05/12/03, BIOS32 rev. 0 @ 0xfd811
> pcibios0 at bios0: rev 2.1 @ 0xfd810/0x7f0
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf20/192 (10 entries)
> pcibios0: PCI Interrupt Router at 000:02:0 ("SIS 85C503 System" rev 0x00)
> pcibios0: PCI bus #3 is the last bus
> bios0: ROM list: 0xc0000/0xfc00 0xdc000/0x4000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "SIS 648 PCI" rev 0x03
> ppb0 at pci0 dev 1 function 0 "SIS 86C202 VGA" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 vendor "Nvidia", unknown product 0x031a
> rev 0xa1
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pcib0 at pci0 dev 2 function 0 "SIS 85C503 System" rev 0x14
> vendor "SIS", unknown product 0x0016 (class serial bus subclass SMBus,
> rev 0x00) at pci0 dev 2 function 1 not configured
> pciide0 at pci0 dev 2 function 5 "SIS 5513 EIDE" rev 0x00: 648: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <IC25N080ATMR04-0>
> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <SONY, DVD RW DW-U50A, 1.5b> SCSI0 5/cdrom
> removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> "SIS 7013 Modem" rev 0xa0 at pci0 dev 2 function 6 not configured
> auich0 at pci0 dev 2 function 7 "SIS 7012 AC97" rev 0xa0: irq 9, SiS7012
> AC97
> ac97: codec id 0x83847650 (SigmaTel STAC9750/51)
> ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
> audio0 at auich0
> ohci0 at pci0 dev 3 function 0 "SIS 5597/5598 USB" rev 0x0f: irq 9,
> version 1.0, legacy support
> ohci0: SMM does not respond, resetting
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0
> uhub0: SIS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> ohci1 at pci0 dev 3 function 1 "SIS 5597/5598 USB" rev 0x0f: irq 11,
> version 1.0, legacy support
> ohci1: SMM does not respond, resetting
> usb1 at ohci1: USB revision 1.0
> uhub1 at usb1
> uhub1: SIS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> ohci2 at pci0 dev 3 function 2 "SIS 5597/5598 USB" rev 0x0fpci_intr_map:
> no mapping for pin C
> : couldn't map interrupt
> ehci0 at pci0 dev 3 function 3 "SIS 7002 USB" rev 0x00pci_intr_map: no
> mapping for pin D
> : couldn't map interrupt
> sis0 at pci0 dev 4 function 0 "SIS 900 10/100BaseTX" rev 0x90: irq 11,
> address 08:00:46:a9:3a:5c
> rlphy0 at sis0 phy 1: RTL8201L 10/100 PHY, rev. 1
> wi0 at pci0 dev 7 function 0 "Intersil PRISM3" rev 0x01: irq 10
> wi0: PRISM3 ISL37300P(PCI), Firmware 1.1.1 (primary), 1.5.6 (station),
> address 00:02:8a:94:23:98
> cbb0 at pci0 dev 10 function 0 "Ricoh 5C476 CardBus" rev
> 0xaapci_intr_map: bad interrupt line 128
> : couldn't map interrupt
> cbb1 at pci0 dev 10 function 1 "Ricoh 5C476 CardBus" rev
> 0xaapci_intr_map: bad interrupt line 128
> : couldn't map interrupt
> "Ricoh 5C552 Firewire" rev 0x02 at pci0 dev 10 function 2 not configured
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
> wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> biomask eb6d netmask ef6d ttymask ffef
> pctr: user-level cycle counter enabled
> uhidev0 at uhub0 port 2 configuration 1 interface 0
> uhidev0: Sony OPM-U01, rev 2.00/5.80, addr 2, iclass 3/1
> ums0 at uhidev0: 3 buttons and Z dir.
> wsmouse1 at ums0 mux 0
> dkcsum: wd0 matched BIOS disk 80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> umass0 at uhub1 port 2 configuration 1 interface 0
> umass0: Creative Labs product 0x4116, rev 2.00/0.01, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets
> sd0 at scsibus1 targ 1 lun 0: <CREATIVE, MuVo^2 (uHDD), 0001> SCSI4
> 0/direct removable
> sd0: 3885MB, 3885 cyl, 64 head, 32 sec, 512 bytes/sec, 7958527 sec total
> umass0: at uhub1 port 2 (addr 2) disconnected
> sd0 detached
> scsibus1 detached
> umass0 detached
> umass0 at uhub1 port 2 configuration 1 interface 0
> umass0: Creative Labs product 0x4116, rev 2.00/0.01, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets
> sd0 at scsibus1 targ 1 lun 0: <CREATIVE, MuVo^2 (uHDD), 0001> SCSI4
> 0/direct removable
> sd0: 3885MB, 3885 cyl, 64 head, 32 sec, 512 bytes/sec, 7958527 sec total
>
>
--
pirge :: vice is its own reward
