I am having trouble mounting my cdrom drive. I have read man fstab and man
mount and tried,
mount -t cd9660 -r /dev/cd0a /mnt/cdrom and variations using cd0c and /cdrom
>I get an error message either saying device not configured or Invalid
argument
mkdir /cdrom
adding /dev/cd0c /cdrom cd 9660 ro, noauto 0 0 to fstab
mount /cdrom
>invalid argument
Here is dmesg,
Sep 24 23:00:01 puffy newsyslog[31515]: logfile turned over
Sep 24 23:00:01 puffy syslogd: restart
Sep 25 00:47:24 puffy /bsd: lpt0: out of paper
Sep 25 00:47:30 puffy /bsd: ulpt0 at uhub0 port 1 configuration 1 interface
0
Sep 25 00:47:30 puffy /bsd:
Sep 25 00:47:30 puffy /bsd: ulpt0: EPSON USB Printer, rev 1.10/1.00, addr 2,
iclass 7/1
Sep 25 00:47:30 puffy /bsd: ulpt0: using bi-directional mode
Sep 25 00:52:42 puffy syslogd: exiting on signal 15
Sep 25 11:47:36 puffy syslogd: restart
Sep 25 11:47:36 puffy /bsd: OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57
MST 2005
Sep 25 11:47:37 puffy /bsd: [EMAIL PROTECTED]
:/usr/src/sys/arch/i386/compile/GENERIC
Sep 25 11:47:37 puffy /bsd: cpu0: AMD Athlon(TM) XP 1600+ ("AuthenticAMD"
686-class) 1.40 GHz
Sep 25 11:47:37 puffy /bsd: cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,S
SE
Sep 25 11:47:37 puffy /bsd: real mem = 267935744 (261656K)
Sep 25 11:47:37 puffy /bsd: avail mem = 237584384 (232016K)
Sep 25 11:47:37 puffy /bsd: using 3296 buffers containing 13500416 bytes
(13184K) of memory
Sep 25 11:47:37 puffy /bsd: mainbus0 (root)
Sep 25 11:47:37 puffy /bsd: bios0 at mainbus0: AT/286+(ac) BIOS, date
04/29/02, BIOS32 rev. 0 @ 0xf0bc0
Sep 25 11:47:37 puffy /bsd: apm0 at bios0: Power Management spec V1.2
Sep 25 11:47:37 puffy /bsd: apm0: AC on, battery charge unknown
Sep 25 11:47:37 puffy /bsd: pcibios0 at bios0: rev 2.1 @ 0xf0000/0x1422
Sep 25 11:47:37 puffy /bsd: pcibios0: PCI IRQ Routing Table rev 1.0 @
0xf1370/176 (9 entries)
Sep 25 11:47:37 puffy /bsd: pcibios0: PCI Interrupt Router at 000:04:0 ("VIA
VT82C586 ISA" rev 0x00)
Sep 25 11:47:37 puffy /bsd: pcibios0: PCI bus #1 is the last bus
Sep 25 11:47:37 puffy /bsd: bios0: ROM list: 0xc0000/0xbc00 0xcc000/0x1000
Sep 25 11:47:37 puffy /bsd: cpu0 at mainbus0
Sep 25 11:47:37 puffy /bsd: pci0 at mainbus0 bus 0: configuration mode 1 (no
bios)
Sep 25 11:47:37 puffy /bsd: pchb0 at pci0 dev 0 function 0 "AMD 761 PCI" rev
0x13
Sep 25 11:47:37 puffy /bsd: ppb0 at pci0 dev 1 function 0 "AMD 761 PCI-PCI"
rev 0x00
Sep 25 11:47:37 puffy /bsd: pci1 at ppb0 bus 1
Sep 25 11:47:37 puffy /bsd: vga1 at pci1 dev 5 function 0 "Nvidia GeForce2
MX" rev 0xa1
Sep 25 11:47:37 puffy /bsd: wsdisplay0 at vga1: console (80x25, vt100
emulation)
Sep 25 11:47:37 puffy /bsd: wsdisplay0: screen 1-5 added (80x25, vt100
emulation)
Sep 25 11:47:37 puffy /bsd: pcib0 at pci0 dev 4 function 0 "VIA VT82C686
ISA" rev 0x40
Sep 25 11:47:37 puffy /bsd: pciide0 at pci0 dev 4 function 1 "VIA VT82C571
IDE" rev 0x06: ATA100, channel 0 configured to compatibility, channel 1
configured to compatibility
Sep 25 11:47:37 puffy /bsd: wd0 at pciide0 channel 0 drive 0:
<IBM-DPTA-372050>
Sep 25 11:47:37 puffy /bsd: wd0: 16-sector PIO, LBA, 19574MB, 40088160
sectors
Sep 25 11:47:37 puffy /bsd: wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA
mode 4
Sep 25 11:47:37 puffy /bsd: atapiscsi0 at pciide0 channel 1 drive 0
Sep 25 11:47:37 puffy /bsd: scsibus0 at atapiscsi0: 2 targets
Sep 25 11:47:37 puffy /bsd: cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD
GCC-4120B, 2.02> SCSI0 5/cdrom removable
Sep 25 11:47:37 puffy /bsd: cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
Sep 25 11:47:37 puffy /bsd: uhci0 at pci0 dev 4 function 2 "VIA VT83C572
USB" rev 0x16: irq 9
Sep 25 11:47:37 puffy /bsd: usb0 at uhci0: USB revision 1.0
Sep 25 11:47:37 puffy /bsd: uhub0 at usb0
Sep 25 11:47:37 puffy /bsd: uhub0: VIA UHCI root hub, class 9/0, rev
1.00/1.00,
addr 1
Sep 25 11:47:37 puffy /bsd: uhub0: 2 ports with 2 removable, self powered
Sep 25 11:47:37 puffy /bsd: uhci1 at pci0 dev 4 function 3 "VIA VT83C572
USB" rev 0x16: irq 9
Sep 25 11:47:37 puffy /bsd: usb1 at uhci1: USB revision 1.0
Sep 25 11:47:37 puffy /bsd: uhub1 at usb1
Sep 25 11:47:37 puffy /bsd: uhub1: VIA UHCI root hub, class 9/0, rev
1.00/1.00,
addr 1
Sep 25 11:47:37 puffy /bsd: uhub1: 2 ports with 2 removable, self powered
Sep 25 11:47:37 puffy /bsd: viaenv0 at pci0 dev 4 function 4 "VIA VT82C686
SMBus" rev 0x40: HWM disabled
Sep 25 11:47:37 puffy /bsd: cmpci0 at pci0 dev 5 function 0 "C-Media
Electronics CMI8738/C3DX Audio" rev 0x10: irq 10
Sep 25 11:47:37 puffy /bsd: audio0 at cmpci0
Sep 25 11:47:37 puffy /bsd: ral0 at pci0 dev 9 function 0 "Ralink RT2560"
rev 0x01: irq 9, address 00:0f:66:f4:10:8a
Sep 25 11:47:37 puffy /bsd: ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
Sep 25 11:47:37 puffy /bsd: fxp0 at pci0 dev 10 function 0 "Intel 82557" rev
0x08, i82559: irq 5, address 00:d0:b7:2c:41:54
Sep 25 11:47:37 puffy /bsd: inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
Sep 25 11:47:37 puffy /bsd: emu0 at pci0 dev 11 function 0 "Creative Labs
SoundBlaster Live" rev 0x08: irq 10
Sep 25 11:47:37 puffy /bsd: ac97: codec id 0x54524123 (TriTech
Microelectronics TR28602)
Sep 25 11:47:37 puffy /bsd: audio1 at emu0
Sep 25 11:47:37 puffy /bsd: "Creative Labs PCI Gameport Joystick" rev 0x08
at pci0 dev 11 function 1 not configured
Sep 25 11:47:37 puffy /bsd: "Intel V.92 Modem" rev 0x00 at pci0 dev 13
function 0 not configured
Sep 25 11:47:37 puffy /bsd: isa0 at pcib0
Sep 25 11:47:37 puffy /bsd: isadma0 at isa0
Sep 25 11:47:37 puffy /bsd: pckbc0 at isa0 port 0x60/5
Sep 25 11:47:37 puffy /bsd: pckbd0 at pckbc0 (kbd slot)
Sep 25 11:47:37 puffy /bsd: pckbc0: using irq 1 for kbd slot
Sep 25 11:47:37 puffy /bsd: wskbd0 at pckbd0 (mux 1 ignored for console):
console keyboard, using wsdisplay0
Sep 25 11:47:37 puffy /bsd: pmsi0 at pckbc0 (aux slot)
Sep 25 11:47:37 puffy /bsd: pckbc0: using irq 12 for aux slot
Sep 25 11:47:37 puffy /bsd: wsmouse0 at pmsi0 mux 0
Sep 25 11:47:37 puffy /bsd: pcppi0 at isa0 port 0x61
Sep 25 11:47:37 puffy /bsd: midi0 at pcppi0: <PC speaker>
Sep 25 11:47:37 puffy /bsd: sysbeep0 at pcppi0
Sep 25 11:47:37 puffy /bsd: lpt0 at isa0 port 0x378/4 irq 7
Sep 25 11:47:37 puffy /bsd: npx0 at isa0 port 0xf0/16: using exception 16
Sep 25 11:47:37 puffy /bsd: pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16
byte fifo
Sep 25 11:47:37 puffy /bsd: pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16
byte fifo
Sep 25 11:47:37 puffy /bsd: fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
Sep 25 11:47:37 puffy /bsd: fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18
sec
Sep 25 11:47:37 puffy /bsd: biomask eb45 netmask eb65 ttymask fbe7
Sep 25 11:47:37 puffy /bsd: pctr: user-level cycle counter enabled
Sep 25 11:47:37 puffy /bsd: mtrr: Pentium Pro MTRR support
Sep 25 11:47:37 puffy /bsd: ulpt0 at uhub0 port 1 configuration 1 interface
0
Sep 25 11:47:37 puffy /bsd: ulpt0: EPSON USB Printer, rev 1.10/1.00, addr 2,
iclass 7/1
Sep 25 11:47:37 puffy /bsd: ulpt0: using bi-directional mode
Sep 25 11:47:37 puffy /bsd: dkcsum: wd0 matched BIOS disk 80
Sep 25 11:47:37 puffy /bsd: root on wd0a
Sep 25 11:47:37 puffy /bsd: rootdev=0x0 rrootdev=0x300 rawdev=0x302
Sep 25 11:47:38 puffy savecore: no core dump
Sep 25 12:59:46 puffy /bsd: cd0(atapiscsi0:0:0): Check Condition (error
0x70) on opcode 0x28
Sep 25 12:59:46 puffy /bsd: SENSE KEY: Illegal Request
Sep 25 12:59:46 puffy /bsd: ASC/ASCQ: Illegal Mode For This Track
Is there any way to copy dmesg from the terminal and past it into an x
window? Or just to copy anything between a terminal and x?
I've checked the archives and come up empty.
