Vinicius Pavanelli Vianna <[EMAIL PROTECTED]> writes:
> Hi,
>
> You need to boot bsd.rd to install, on the boot prompt type "bsd.rd" and not
>
> boot> boot cd0a:/3.7/i386/bsd -c
>
> HTH,
> Vinicius
>
> Frangois Chambaud wrote:
>
> >Hello misc,
> >
> >I'm trying to install OpenBSD 3.7 from original CD's, but without any
> >success. I'm googling for some time now, but I haven't find a solution
> >to this problem.
> >
> >panic: cannot open disk, 0xf0/0x3f0, error 6
> >
> >- Compaq Proliant 2500
> >- bi-processors motherboard, but only one installed (Pentium [EMAIL
> >PROTECTED])
> >- 256 MB RAM
> >- 3 x 4,3 GB Ultra-Wide SCSI hard drives
> >- Symbios Logic 53c875 SCSI Host Adapter
> >- Compaq SMART-2/P RAID controller
> >- Compaq Netelligent PCI Lan Adapter
> >
> >Somebody can help me for this one?
> >
> >Thanks in advance.
> >
> >Frangois
> >
> >
> >
> >>>OpenBSD/i386 CDBOOT 1.00
> >>>
> >>>
> >boot> machine mem [EMAIL PROTECTED]
> >Region 0: type 1 at 0x0 for 638KB
> >Region 1: type 1 at 0x100000 for 261120KB
> >Low ram: 638KB High ram: 15360KB
> >Total free memory: 261758KB
> >boot> boot cd0a:/3.7/i386/bsd -c
> >booting cd0a:/3.7/i386/bsd: 4686240+945680 [52+241328+223324]=0x5d0864
> >entry point at 0x100120
> >
> >[ using 465076 bytes of bsd ELF symbol table ]
> >Copyright (c) 1982, 1986, 1989, 1991, 1993
> > The Regents of the University of California. All rights reserved.
> >Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org
> >
> >OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
> > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> >cpu0: Intel Pentium Pro ("GenuineIntel" 686-class, 256KB L2 cache) 199 MHz
> >cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV
> >real mem = 268017664 (261736K)
> >avail mem = 237793280 (232220K)
> >using 3297 buffers containing 13504512 bytes (13188K) of memory
> >User Kernel Config
> >UKC> disable pcibios
> >254 pcibios0 disabled
> >UKC> disable eisa
> >232 eisa0 disabled
> >UKC> exit
> >Continuing...
> >mainbus0 (root)
> >bios0 at mainbus0: AT/286+(00) BIOS, date 12/30/98, BIOS32 rev. 0 @ 0xf0000
> >pcibios at bios0 function 0x1a not configured
> >bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xe8000/0x6000 0xee000/0x2000!
> >cpu0 at mainbus0
> >pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> >pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
> >ppb0 at pci0 dev 13 function 0 "IBM 82351 PCI-PCI" rev 0x01
> >pci1 at ppb0 bus 1
> >vga1 at pci1 dev 6 function 0 "Cirrus Logic CL-GD5430" rev 0x22
> >wsdisplay0 at vga1: console (80x25, vt100 emulation)
> >wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> >tl0 at pci1 dev 7 function 0 "Compaq ProLiant Netelligent 10/100 TX" rev
> >0x10: irq 5 address 00:80:5f:a6:ee:92
> >nsphy0 at tl0 phy 1: DP83840 10/100 PHY, rev. 0
> >ukphy0 at tl0 phy 31: Generic IEEE 802.3u media interface
> >ukphy0: OUI 0x100014, model 0x0001, rev. 4
> >siop0 at pci1 dev 9 function 0 "Symbios Logic 53c875" rev 0x03: irq 10,
> >using 4K of on-board RAM
> >scsibus0 at siop0: 16 targets
> >ppb1 at pci0 dev 15 function 0 "IBM 82351 PCI-PCI" rev 0x01
> >pci2 at ppb1 bus 2
> >cac0 at pci2 dev 0 function 0 "Compaq SMART2P RAID" rev 0x02: irq 9 Compaq
> >SMART-2/P
> >scsibus1 at cac0: 1 targets
> >sd0 at scsibus1 targ 0 lun 0: <Compaq, RAID5 volume #, > SCSI2 0/direct fixed
> >sd0: 8187MB, 2055 cyl, 255 head, 32 sec, 512 bytes/sec, 16768800 sec total
> >"Compaq EISA" rev 0x07 at pci0 dev 20 function 0 not configured
> >eisa at mainbus0 not configured
> >isa0 at mainbus0
> >isadma0 at isa0
> >pckbc0 at isa0 port 0x60/5
> >pckbd0 at pckbc0 (kbd slot)
> >pckbc0: using irq 1 for kbd slot
> >wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
> >wsdisplay0
> >wdc0 at isa0 port 0x1f0/8 irq 14
> >atapiscsi0 at wdc0 channel 0 drive 0
> >scsibus2 at atapiscsi0: 2 targets
> >cd0 at scsibus2 targ 0 lun 0: <HITACHI, CDR-7930, 1023> SCSI0 5/cdrom
> >removable
> >cd0(wdc0:0:0): using BIOS timings
> >pcppi0 at isa0 port 0x61
> >midi0 at pcppi0: <PC speaker>
> >sysbeep0 at pcppi0
> >lpt2 at isa0 port 0x3bc/4: polled
> >npx0 at isa0 port 0xf0/16: using exception 16
> >pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> >pccom0: console
> >pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> >fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> >fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> >biomask ffc5 netmask ffe5 ttymask ffe7
> >pctr: 686-class user-level performance counters enabled
> >mtrr: Pentium Pro MTRR support
> >dkcsum: sd0 matched BIOS disk 80
> >root on wd15a
> >rootdev=0xf0 rrootdev=0x3f0 rawdev=0x3f2
> >panic: cannot open disk, 0xf0/0x3f0, error 6
> >Stopped at Debugger+0x4: leave
> >RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
> >DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
> >ddb> trace
> >Debugger(3,3f2,d06d3f58,84,3f2) at Debugger+0x4
> >panic(d04dd860,f0,3f0,6,d06d3d8c) at panic+0x63
> >dk_mountroot(0,0,d06d3fa0,d01fde23,10000000) at dk_mountroot+0x177
> >vfs_mountroot(10000000,ef6007ff,d05c,0,0) at vfs_mountroot+0x51
> >main(0,0,0,0,0) at main+0x43b
> >ddb> ps
> > PID PPID PGRP UID S FLAGS WAIT COMMAND
> > 2 0 0 0 3 0x100204 kmalloc kmthread
> > 1 0 0 0 3 0x4 initexec swapper
> >* 0 -1 0 0 7 0x80204 swapper
> >ddb>
> >
> >
>
>
>
Thanks a lot Vinicius.
The good command at boot prompt is:
boot> boot cd0a:/3.7/i386/bsd.rd -c
The -c option is only for the machine memory.
Brad, I will try a snapshot as soon as possible.
Here is my dmesg after a successful install:
# dmesg
OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium Pro ("GenuineIntel" 686-class, 256KB L2 cache) 199 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV
real mem = 268017664 (261736K)
avail mem = 237793280 (232220K)
using 3297 buffers containing 13504512 bytes (13188K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/30/98, BIOS32 rev. 0 @ 0xf0000
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 8 Interrupt Routing table entries
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xe8000/0x6000 0xee000/0x2000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
ppb0 at pci0 dev 13 function 0 "IBM 82351 PCI-PCI" rev 0x01
pci1 at ppb0 bus 1
vga1 at pci1 dev 6 function 0 "Cirrus Logic CL-GD5430" rev 0x22
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
tl0 at pci1 dev 7 function 0 "Compaq ProLiant Netelligent 10/100 TX" rev 0x10:
irq 5 address 00:80:5f:a6:ee:92
nsphy0 at tl0 phy 1: DP83840 10/100 PHY, rev. 0
ukphy0 at tl0 phy 31: Generic IEEE 802.3u media interface
ukphy0: OUI 0x100014, model 0x0001, rev. 4
siop0 at pci1 dev 9 function 0 "Symbios Logic 53c875" rev 0x03: irq 10, using
4K of on-board RAM
scsibus0 at siop0: 16 targets
ppb1 at pci0 dev 15 function 0 "IBM 82351 PCI-PCI" rev 0x01
pci2 at ppb1 bus 2
cac0 at pci2 dev 0 function 0 "Compaq SMART2P RAID" rev 0x02: irq 9 Compaq
SMART-2/P
scsibus1 at cac0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <Compaq, RAID5 volume #, > SCSI2 0/direct fixed
sd0: 8187MB, 2055 cyl, 255 head, 32 sec, 512 bytes/sec, 16768800 sec total
"Compaq EISA" rev 0x07 at pci0 dev 20 function 0 not configured
eisa0 at mainbus0
eisa0: can't map I/O space for slot 6
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
wdc0 at isa0 port 0x1f0/8 irq 14
atapiscsi0 at wdc0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <HITACHI, CDR-7930, 1023> SCSI0 5/cdrom removable
cd0(wdc0:0:0): using BIOS timings
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ffc5 netmask ffe5 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: sd0 matched BIOS disk 80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
Francois
--
http://www.chambaud.org
