Hello,
Firstly, I've been an avid OpenBSD user and advocate for many years now
and I'm truely addidcted to this OS... I love it.
I had a Dell Latitude and it worked beautifully with OpenBSD but
unfortunately it died.
My wife kindly bought me a new $2,000 Toshiba SatelliteM60 by surprise
but unfortunately, it wasn't very OpenBSD compatible. The BIOS is
basically useless, The sound never worked (it does now under 3.8, thank
you - sound again after 8 months :) and the USB ports don't work. This
means I'm forced to use the crummy finger pad thingy that doesn't work
well anyway. I can't attach an external mouse via the USB ports and
someone somewhere along the way decided that laptops don't need serial
ports anymore.
ohci0 && ohci1 show up as 'ATI SB200 USB' no mapping for pin A
I've gone into UKC at boot time and tried several things to no avail - it's
a compatibility thing.
Is support being added for this USB to work.
I'd really like to be able to use an external mouse, both in Console and X.
I've included my dmesg below:
/*--------------------------------------8<------------------------------------------
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz ("GenuineIntel"
686-class) 3.07 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,TM2,CNXT-ID
cpu0: Enhanced SpeedStep 2300 MHz (1356 mV): unknown EST cpu, no changes
possible
real mem = 200843264 (196136K)
avail mem = 176390144 (172256K)
using 2477 buffers containing 10145792 bytes (9908K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(22) BIOS, date 02/16/04, BIOS32 rev. 0 @ 0xe99b0
apm0 at bios0: Power Management spec V1.1
apm0: battery life expectancy 98%
apm0: AC on, battery charge unknown, estimated 4:12 hours
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xe7000/0x680
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfe840/176 (9 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1002 product 0x4353
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xf000 0xe0000/0x2000! 0xe6000/0x1000!
0xeb000/0x5000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ATI RS300 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "ATI Radeon IGP 9100 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon Mobility IGP 9100" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ohci0 at pci0 dev 19 function 0 "ATI SB200 USB" rev 0x01pci_intr_map: no
mapping for pin A
: couldn't map interrupt
ohci1 at pci0 dev 19 function 1 "ATI SB200 USB" rev 0x01pci_intr_map: no
mapping for pin A
: couldn't map interrupt
ehci0 at pci0 dev 19 function 2 "ATI SB200 USB2" rev 0x01pci_intr_map:
no mapping for pin A
: couldn't map interrupt
"ATI SB200 SMBus" rev 0x1a at pci0 dev 20 function 0 not configured
pciide0 at pci0 dev 20 function 1 "ATI IXP200 IDE" rev 0x00: DMA
(unsupported), channel 0 configured to compatibility, channel 1
configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS424030M9AT00>
wd0: 16-sector PIO, LBA48, 28615MB, 58605120 sectors
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA760 DVD/CDRW, 1.50> SCSI0
5/cdrom removable
pcib0 at pci0 dev 20 function 3 "ATI SB200 PCI-ISA" rev 0x00
ppb1 at pci0 dev 20 function 4 "ATI SB200 PCI-PCI" rev 0x00
pci2 at ppb1 bus 2
cbb0 at pci2 dev 6 function 0 vendor "ENE", unknown product 0x1411 rev
0x00pci_intr_map: no mapping for pin A
: couldn't map interrupt
vendor "ENE", unknown product 0x0530 (class memory subclass flash, rev
0x00) at pci2 dev 6 function 1 not configured
vendor "ENE", unknown product 0x0550 (class system unknown subclass
0x05, rev 0x00) at pci2 dev 6 function 2 not configured
rl0 at pci2 dev 7 function 0 "Realtek 8139" rev 0x10: irq 11 address
00:a0:d1:b7:0e:f0
rlphy0 at rl0 phy 0: RTL internal phy
"Texas Instruments TSB43AB21 FireWire" rev 0x00 at pci2 dev 10 function
0 not configured
auixp0 at pci0 dev 20 function 5 "ATI IXP200 AC97" rev 0x01: irq 10
auixp0: soft resetting aclink
auixp0: not up; resetting aclink hardware
auixp0: not up; resetting aclink hardware
auixp0: aclink hardware reset successful
vendor "ATI", unknown product 0x434d (class communications subclass
modem, rev 0x01) at pci0 dev 20 function 6 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Intel 82365SL rev 2> has socket A only
pcmcia0 at pcic0 controller 0 socket 0
pcic0: irq 3, polling enabled
biomask e355 netmask eb55 ttymask fbdf
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ac97: codec id 0x414c4752 (Avance Logic ALC250A?)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auixp0
----------------------------------------8<----------------------------------------*/
Any assistance is appreciated.
Regards
Steve L
