On 9/13/05, Reyk Floeter <[EMAIL PROTECTED]> wrote: > On Mon, Sep 12, 2005 at 09:12:35PM +0100, Eric Dillenseger wrote: > > Hello, > > > > I've been using a DWL-G520 as an access point with OpenBSD 3.7. Apart > > from not allowing higher modes than 11b, it ran fine. > > > > Today I upgraded to 3.8 form a snapshot I downloaded Friday. The > > upgrade went smooth as usual. I went to modify > > /usr/src/sys/dev/ic/ar5xxx.c so the country code is set: > > > > /* > > * Enable to overwrite the country code (use "00" for debug) > > */ > > #if 0 > > #define COUNTRYCODE "fr" > > #endif > > > > #if 1 > #define COUNTRYCODE "fr" > #endif > > reyk >
BTW, I've found out the default channel settings do not work with my card. If I do not specify a channel, the card logs device timeouts and the card is unreachable over de wlan, but if I specify chan 11, then it's ok, but only in 11b mode. If I try to force the 11g mode, the whole system freeze and, again, the card is unreachable. Is there some limitations in the driver? or the card? I'm configuring the card through hostname.ath0: inet 10.0.0.254 255.0.0.0 NONE nwid <ssid> nwkey <wep> media autoselect mediaopt hostap chan 11 Thanks.
