I (think I) found the problem... I will be posting a patch shortly if I
confirm my suspicions.
Thanks.
Tony Lambiris wrote:
We have some motherboards with (what we think) are the same chips and
revisions with the same hard drives, but some drives are being detected
as DMA and others as ATA133. Here is an example:
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD800BB-75JHC0>
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0 at pci0 dev 15 function 0 "VIA VT82C571 IDE" rev 0x06: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD800BB-75JHC0>
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
As you can see it's the same IDE chipset, same revision, same drives..
the only thing I can think of is it's an IDE ribbon issue, but the
ribbons we used (which were mixed from the cases and the motherboard
boxes), were brand new.
Any suggestions?
TIA.
--
Tony Lambiris [ [EMAIL PROTECTED] ]
"so if it is really hard for you then perhaps you are just
retarded and need treatment w/ electricity and if that does
not help then perhaps should not use computers..."
