-----BEGIN PGP SIGNED MESSAGE-----
Hash: RIPEMD160
Hi Gang,
probably a bit of a ridiculous question, but I ever noticed that one
of my machines I occasionally use for testing (Pentium MMX, 133 MHz)
is generally a bit slow and swaps out a lot. I didn't care, though,
until now.
I just looked at the dmesg today, and saw that only 900K are
recognized. No matter if I stuffed in a 16MB module or a 64MB one;
16MB are onboard additionally. As far as I can see, the kernel sees no
difference there.
OK, could be that this box is just crap, but I'd like to use it for a
dialin-server now. If its possible to get this thing right, it really
would do.. Somebody there who can point me to appropriate information?
Thanks for any help,
/Markus
dmesg:
* 16 MB external:
$ dmesg|head
OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 146 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
cpu0: F00F bug workaround installed
real mem = 16359424 (15976K)
avail mem = 6823936 (6664K)
using 225 buffers containing 921600 bytes (900K) of memory
mainbus0 (root)
...
* 64 MB external:
OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 146 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
cpu0: F00F bug workaround installed
real mem = 16359424 (15976K)
avail mem = 6823936 (6664K)
using 225 buffers containing 921600 bytes (900K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ff) BIOS, date 01/26/98, BIOS32 rev. 0 @
0xf7000
apm0 at bios0: Power Management spec V1.2 (BIOS managing devices)
apm0: battery life expectancy 99%
apm0: AC on, battery charge high, charging
pcibios0 at bios0: rev 2.1 @ 0xf7000/0xf80
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf52f0/128 (6 entries)
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf78d0/128 (6 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0xffff product 0xffff
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xa000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Opti 82C701" rev 0x20
pcib0 at pci0 dev 1 function 0 "Opti 82C700" rev 0x20
cbb0 at pci0 dev 17 function 0 "Texas Instruments PCI1131 CardBus" rev
0x01: irq 15
cbb1 at pci0 dev 17 function 1 "Texas Instruments PCI1131 CardBus" rev
0x01: irq 11
vga1 at pci0 dev 18 function 0 "Chips and Technologies 68554" rev 0xa2
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 20 function 0 "Opti 82D568 IDE" rev 0x12: DMA
(unsupported), channel 0 wired to compatibility, channel 1 wired to
compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DBCA-204860>
wd0: 16-sector PIO, LBA, 4645MB, 9514260 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA120, 1.01> SCSI0 5/cdrom
removable
pciide0: no compatibility interrupt for use by channel 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom2: irq 5 already in use
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 2 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
biomask ef4d netmask ef4d ttymask ffcf
pctr: 586-class performance counters and user-level cycle counter enabled
ne3 at pcmcia0 function 0 "Fast Ethernet, 16-bit PC Card, 3.0" port
0xa000/32
ne3: address 00:e0:98:39:04:c2
bmtphy0 at ne3 phy 1: BCM5201 10/100 PHY, rev. 2
ep1 at pcmcia1 function 0 "3Com, Megahertz 574B, B" port 0xa400/32:
address 00:04:75:80:ab:c6
tqphy0 at ep1 phy 0: 78Q2120 10/100 PHY, rev. 10
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
iD8DBQFDIqp/V/arRO6fNWsRA/caAKDSYno34gUcFB4PuMBJwkX91axCxQCfXpvK
mHc+kKDgyczffE12mYZkvHM=
=b+uJ
-----END PGP SIGNATURE-----
