I thought I would give the latest Beta a try on a 4WAY PIII. The USB
is supposed to be disabled in the BIOS as there are no physical USB
connectors even on this box. Its a Dell 6350
---Mike
>> OpenBSD/i386 BOOT 2.10
boot>
booting hd0a:/bsd: 4846336+944176 [52+249696+230995]=0x5fb28c
entry point at 0x100120
[ using 481116 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.8-beta (GENERIC.MP) #277: Mon Aug 22 23:04:26 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium III Xeon ("GenuineIntel" 686-class, 1024KB L2
cache) 500 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 2147061760 (2096740K)
avail mem = 1953095680 (1907320K)
using 4278 buffers containing 107454464 bytes (104936K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 02/12/03, BIOS32 rev. 0 @ 0xffe90
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc7a0/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x6600 0xd0000/0x1000
0xd4000/0x800 0xd8000/0x800 0xdc000/0x800
mainbus0: Intel MP Specification (Version 1.4) (DELL PowerEdge 83)
cpu0 at mainbus0: apid 3 (boot processor)
cpu0: apic clock running at 100 MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel Pentium III Xeon ("GenuineIntel" 686-class, 1024KB L2
cache) 500 MHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel Pentium III Xeon ("GenuineIntel" 686-class, 1024KB L2
cache) 500 MHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
cpu3 at mainbus0: apid 2 (application processor)
cpu3: Intel Pentium III Xeon ("GenuineIntel" 686-class, 1024KB L2
cache) 500 MHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type ISA
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apic 4
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pcib0 at pci0 dev 2 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 2 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 ignored (disabled)
pciide0: channel 1 ignored (disabled)
uhci0 at pci0 dev 2 function 2 "Intel 82371AB USB" rev
0x01pci_intr_map: bus 0 dev 2 func 2 pin 4; line 5
pci_intr_map: no MP mapping found
isa_intr_establish: no MP mapping found
: irq 5
usb0 at uhci0uhci0: host controller process error
uhci0: host controller halted
: USB revision 1.0
uhci_freex: xfer=0xd2863a00 not busy, 0x4f4e5155
panic: usbd_transfer: not done
Stopped at Debugger+0x4: leave
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb{0}> trace
Debugger(d2863900,65,1,0,d2863900) at Debugger+0x4
panic(d056fb6a,d2863940,8,d289cd80,d2863900) at panic+0x63
usbd_sync_transfer(d2863900,d059fb60,d06fea68,d0310125,d059fb60) at usbd_sync_t
ransfer
usbd_do_request_flags_pipe(d289cd80,d289cd00,d06feae0,d289cdb8,0) at usbd_do_re
quest_flags_pipe+0x72
usbd_do_request_flags(d289cd80,d06feae0,d289cdb8,0,0) at usbd_do_request_flags+
0x23
usbd_do_request(d289cd80,d06feae0,d289cdb8,d04a1eb4,1000680) at usbd_do_request
+0x1d
usbd_get_desc(d289cd80,1,0,8,d289cdb8,c8,1,0) at usbd_get_desc+0x3d
usbd_new_device(d289ce00,d28a1000,0,2,0,d289ce34,d06fed08,d049eceb) at usbd_new
_device+0x152
usb_attach(d28a1000,d289ce00,d28a1000,0,d28a1000) at usb_attach+0xf1
config_attach(d28a1000,d0585614,d28a1000,d049f0ac,1) at config_attach+0xef
uhci_pci_attach(d289bf40,d28a1000,d06fedf0,0,d289f000) at uhci_pci_attach+0x21d
config_attach(d289bf40,d0583f04,d06fedf0,d0364f7c) at config_attach+0xef
pciattach(d289bfc0,d289bf40,d06feeb0,0,d0593058) at pciattach+0x1c8
config_attach(d289bfc0,d05833e8,d06feeb0,d0364b48) at config_attach+0xef
mainbus_attach(0,d289bfc0,0,0,d06fef10) at mainbus_attach+0x134
config_attach(0,d05833c4,0,0,d05d7100) at config_attach+0xef
config_rootfound(d051ba1c,0,d06fef58,d033a530) at config_rootfound+0x27
cpu_configure(0,1,3,0,7fffe000) at cpu_configure+0x1f
main(0,0,0,0,0) at main+0x359
ddb{0}> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
* 0 -1 0 0 7 0x80204 swapper
ddb{0}>
If I take out the Sangoma DSL modem, the boot looks like
ddb{0}> >> OpenBSD/i386 BOOT 2.10
boot>
booting hd0a:/bsd: 4846336+944176 [52+249696+230995]=0x5fb28c
entry point at 0x100120
[ using 481116 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.8-beta (GENERIC.MP) #277: Mon Aug 22 23:04:26 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium III Xeon ("GenuineIntel" 686-class, 1024KB L2
cache) 500 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 2147061760 (2096740K)
avail mem = 1953095680 (1907320K)
using 4278 buffers containing 107454464 bytes (104936K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 02/12/03, BIOS32 rev. 0 @ 0xffe90
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc7a0/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x6600 0xd0000/0x1000
0xd4000/0x800 0xd8000/0x800 0xdc000/0x800
mainbus0: Intel MP Specification (Version 1.4) (DELL PowerEdge 83)
cpu0 at mainbus0: apid 3 (boot processor)
cpu0: apic clock running at 100 MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel Pentium III Xeon ("GenuineIntel" 686-class, 1024KB L2
cache) 500 MHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel Pentium III Xeon ("GenuineIntel" 686-class, 1024KB L2
cache) 500 MHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
cpu3 at mainbus0: apid 1 (application processor)
cpu3: Intel Pentium III Xeon ("GenuineIntel" 686-class, 1024KB L2
cache) 500 MHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type ISA
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apic 4
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pcib0 at pci0 dev 2 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 2 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 ignored (disabled)
pciide0: channel 1 ignored (disabled)
uhci0 at pci0 dev 2 function 2 "Intel 82371AB USB" rev
0x01pci_intr_map: no mapping for pin D
: couldn't map interrupt
"Intel 82371AB Power" rev 0x02 at pci0 dev 2 function 3 not configured
vga1 at pci0 dev 4 function 0 "ATI Mach64 GI" rev 0x5c
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ahc1 at pci0 dev 6 function 0 "Adaptec AHA-2940U2 U2" rev 0x00: apic
4 int 14 (irq 14)
scsibus0 at ahc1: 16 targets
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST318203LC, 0001> SCSI2 0/direct fixed
sd0: 17366MB, 9772 cyl, 12 head, 303 sec, 512 bytes/sec, 35566480 sec total
sd1 at scsibus0 targ 1 lun 0: <SEAGATE, ST318203LC, 0001> SCSI2 0/direct fixed
sd1: 17366MB, 9772 cyl, 12 head, 303 sec, 512 bytes/sec, 35566480 sec total
sd2 at scsibus0 targ 2 lun 0: <SEAGATE, ST318203LC, 0001> SCSI2 0/direct fixed
sd2: 17366MB, 9772 cyl, 12 head, 303 sec, 512 bytes/sec, 35566480 sec total
safte0 at scsibus0 targ 6 lun 0: <DELL, 1x3 U2W SCSI BP, 5.39> SCSI2
3/processor fixed
hifn0 at pci0 dev 8 function 0 "Hifn 7955/7954" rev 0x00: LZS 3DES
ARC4 MD5 SHA1 RNG AES PK, 32KB dram, apic 4 int 11 (irq 11)
em0 at pci0 dev 10 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05:
apic 4 int 10 (irq 10), address: 00:0e:0c:63:ea:cf
pchb0 at pci0 dev 16 function 0 "Intel 82451NX Mem & IO" rev 0x03
pchb1 at pci0 dev 18 function 0 "Intel 82454NX PXB" rev 0x02
pchb2 at pci0 dev 19 function 0 "Intel 82454NX PXB" rev 0x02
pci1 at pchb2 bus 1
ahc2 at pci1 dev 4 function 0 "Adaptec AIC-7890/1 U2" rev 0x00: apic
4 int 21 (irq 5)
scsibus1 at ahc2: 16 targets
ahc3 at pci1 dev 6 function 0 "Adaptec AIC-7890/1 U2" rev 0x00: apic
4 int 22 (irq 14)
scsibus2 at ahc3: 16 targets
ahc4 at pci1 dev 8 function 0 "Adaptec AIC-7860" rev 0x03: apic 4 int
20 (irq 14)
scsibus3 at ahc4: 8 targets
cd0 at scsibus3 targ 5 lun 0: <NEC, CD-ROM DRIVE:465, 1.25> SCSI2
5/cdrom removable
pchb3 at pci0 dev 20 function 0 "Intel 82454NX PXB" rev 0x02
pci2 at pchb3 bus 2
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 0 netmask 0 ttymask 0
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
ahc1: target 0 using 16bit transfers
ahc1: target 0 synchronous at 40.0MHz, offset = 0xf
dkcsum: sd0 matches BIOS drive 0x80
ahc1: target 1 using 16bit transfers
ahc1: target 1 synchronous at 40.0MHz, offset = 0xf
dkcsum: sd1 matches BIOS drive 0x81
ahc1: target 2 using 16bit transfers
ahc1: target 2 synchronous at 40.0MHz, offset = 0xf
dkcsum: sd2 matches BIOS drive 0x82
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
WARNING: / was not properly unmounted
Automatic boot in progress: starting file system checks.
/dev/rsd0a: 3714 files, 21594 used, 2559264 free (232 frags, 319879
blocks, 0.0% fragmentation)
/dev/rsd0a: MARKING FILE SYSTEM CLEAN
/dev/rsd0e: 89739 files, 476021 used, 4400478 free (5214 frags,
549408 blocks, 0.1% fragmentation)
/dev/rsd0e: MARKING FILE SYSTEM CLEAN
setting tty flags
machdep.allowaperture: 0 -> 1
starting network
starting system logger
starting rpc daemons:.
savecore: no core dump
checking quotas: done.
building ps databases: kvm dev.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files
starting network daemons: sendmail inetd sshd.
starting local daemons:.
standard daemons: cron.
Tue Sep 6 07:46:45 EDT 2005
OpenBSD/i386 (hippo.sentex.ca) (tty00)
Not sure if its the DSL modem or perhaps its IRQ conflicting with the
bogus USB ?
---Mike
--------------------------------------------------------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, [EMAIL PROTECTED]
Providing Internet since 1994 www.sentex.net
Cambridge, Ontario Canada www.sentex.net/mike
