Just to share; Damien Bergamini helped me with the 855wrap for the crappy
DELL-BIOS (see other thread).
Now, this is phantastic:
Installed 3.7 onto my DELL notebook Latitude D400. Just install, nothing
configured, with USB-keyboard (sg), USB-mouse, Broadcom integrated NIC.
Added some apps, and rebooted.
(Plus added the 855wrap by Damien).
startxfce and the screen comes up, 1024x768, without me doing anything; no
X-config. Keyboard fully functional (alas, as 'us'), mouse fully
functional. I repeat, *nothing* configured. Tried to trick it more:
rebooted, but now with an IBM P260 attached. Also here: works out of the
box and - still without *any* X-config ! - shows 1600x1200 pixels !! And -
still without any config; not touching any mixer or else - plays Steve
Ballmer monkeying around on mplayer; pictures and sound.
I have - cough, cough - XP and Debian on the same box; and neither would
do any of this without me clicking my way through. None would play a .mpeg
on a secondary screen without *any* setting.
(Sorry for my enthusiasm; but this is what I call 'Plug&Play' !! - No,
Knoppix would *not* give the 1600x1200 display, btw.
Here's the dmesg:
OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1400MHz ("GenuineIntel" 686-class) 1.40
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2
cpu0: Enhanced SpeedStep 1400 MHz (1484 mV): speeds: 1400, 1200, 1000, 800, 600
MHz
real mem = 266600448 (260352K)
avail mem = 236498944 (230956K)
using 3280 buffers containing 13434880 bytes (13120K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 06/28/05, BIOS32 rev. 0 @ 0xffe90
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc590/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xd800! 0xcd800/0x800! 0xce000/0x800 0xce800/0x800
0xcf000/0x800 0xcf800/0x800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82852GM Hub-PCI" rev 0x02
"Intel 82852GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82852GM Configuration" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82852GM AGP" rev 0x02: aperture at
0xf0000000, size 0x8000000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82852GM AGP" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci1 at ppb0 bus 1
bge0 at pci1 dev 0 function 0 "Broadcom BCM5705M" rev 0x01, BCM5705 A1
(0x3001): irq 11 address 00:0f:1f:ab:01:9c
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 1
cbb0 at pci1 dev 1 function 0 "Texas Instruments PCI7510 CardBus" rev 0x01: irq
11
cbb1 at pci1 dev 1 function 1 "Texas Instruments PCI7610 CardBus (Smart Card
mode)" rev 0x01: irq 11
"Texas Instruments PCI7(4-6)10 FireWire" rev 0x00 at pci1 dev 1 function 2 not
configured
vendor "Texas Instruments", unknown product 0x8204 (class system subclass
miscellaneous, rev 0x00) at pci1 dev 1 function 3 not configured
ipw0 at pci1 dev 3 function 0 "Intel PRO/2100 3B" rev 0x04: irq 11, address
00:0c:f1:31:6c:66
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS548040M9AT00>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 ignored (disabled)
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4
AC97
ac97: codec id 0x83847650 (SigmaTel STAC9750/51)
ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask efed netmask efed ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhub4 at uhub3 port 5
uhub4: NEC product 0x0059, class 9/0, rev 2.00/1.00, addr 2
uhub4: single transaction translator
uhub4: 4 ports with 4 removable, self powered
uhidev0 at uhub4 port 1 configuration 1 interface 0
uhidev0: Logitech Logitech USB Keyboard, rev 1.10/12.10, addr 3, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1
uhidev1: Logitech Logitech USB Keyboard, rev 1.10/12.10, addr 3, iclass 3/0
uhidev1: no report descriptor
uhidev2 at uhub4 port 3 configuration 1 interface 0
uhidev2: Dell product 0x3010, rev 2.00/2.20, addr 4, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
auich0: measured ac97 link rate at 48009 Hz, will use 48000 Hz
Thanks & Hurray !
Uwe
It would be too much to ask Xorg to inherit the keymap from console ? -
Now I have to setup a config for just this one item !
