I'm using OpenBSD 3.7 on a Compaq Presario 900 laptop and the sound device
(ALi M5451) is recognized and configured using the autri(4) driver, but I
don't get any output from the speakers when I do something like:
$ cat /bsd > /dev/audio
or when I try to play an audio CD.
I checked all of the mixerctl settings and played with various combinations,
none of which worked. Here is the output of mixerctl -a:
$ mixerctl -a
outputs.master=255,255
outputs.master.mute=off
outputs.mono=255
outputs.mono.mute=off
outputs.mono.source=mixerout
outputs.headphones=255,255
outputs.headphones.mute=off
outputs.bass=15
outputs.treble=15
inputs.speaker=255
inputs.speaker.mute=off
inputs.phone=191
inputs.phone.mute=on
inputs.mic=191
inputs.mic.mute=on
inputs.mic.preamp=off
inputs.mic.source=mic0
inputs.line=191,191
inputs.line.mute=on
inputs.cd=191,191
inputs.cd.mute=off
inputs.video=191,191
inputs.video.mute=on
inputs.aux=191,191
inputs.aux.mute=on
inputs.dac=191,191
inputs.dac.mute=off
record.source=mic
record.volume=255,255
record.volume.mute=off
record.mic=0
record.mic.mute=on
outputs.loudness=on
outputs.spatial=off
outputs.spatial.center=0
outputs.spatial.depth=0
outputs.surround=255,255
outputs.surround.mute=off
outputs.center=255
outputs.center.mute=off
outputs.lfe=255
outputs.lfe.mute=off
I pressed the "increase volume" button on the laptop but I still could not
hear anything.
I know that the sound device is not defective because it works on GNU/Linux.
And there seem to be no irq conflicts with the device either. Here is the
full dmesg:
$ /sbin/dmesg
OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile AMD Athlon(tm) XP 1500+ ("AuthenticAMD" 686-class) 1.33 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,S
SE
real mem = 368611328 (359972K)
avail mem = 329007104 (321296K)
using 4278 buffers containing 18534400 bytes (18100K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(7c) BIOS, date 07/21/03, BIOS32 rev. 0 @ 0xfd760
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xfd760/0x8a0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf10/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Acer Labs M1533 ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xf000 0xdf000/0x1000! 0xe0000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ATI RS100 AGP" rev 0x13
ppb0 at pci0 dev 1 function 0 "ATI RS100 PCI" rev 0x01
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon IGP 320M" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ohci0 at pci0 dev 2 function 0 "Acer Labs M5237 USB" rev 0x03: irq 11,
version 1.0, legacy support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
autri0 at pci0 dev 8 function 0 "Acer Labs M5451 Audio" rev 0x02: irq 5
ac97: codec id 0x41445363 (Analog Devices AD1886A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at autri0
midi0 at autri0: <4DWAVE MIDI UART>
cbb0 at pci0 dev 10 function 0 "Texas Instruments PCI1410 CardBus" rev
0x02pci_intr_map: no mapping for pin A
: couldn't map interrupt
rl0 at pci0 dev 11 function 0 "Realtek 8139" rev 0x20: irq 11 address
00:08:02:f3:b9:33
rlphy0 at rl0 phy 0: RTL internal phy
"Conexant HSF 56k HSFi" rev 0x01 at pci0 dev 12 function 0 not configured
ohci1 at pci0 dev 15 function 0 "Acer Labs M5237 USB" rev 0x03: irq 11,
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pciide0 at pci0 dev 16 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23DA-20>
wd0: 16-sector PIO, LBA, 19077MB, 39070080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, DW-224E, A.0F> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
"Acer Labs M7101 Power Mgmt" rev 0x00 at pci0 dev 17 function 0 not
configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
ahc_isa_idstring: BIOS biffed it at 0x9c00
biomask ef5d netmask ef5d ttymask ffdf
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: KYE Genius USB Wheel Mouse, rev 1.00/0.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
uhidev0: at uhub0 port 2 (addr 2) disconnected
wsmouse1 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: KYE Genius USB Wheel Mouse, rev 1.00/0.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
Thank you for your time.
