Hi all,
trying to configure a laserjet 1022 on 3.7 release so that win xp
clients can print to it.
the client machine is listed in hosts.lpd and has a valid hosts entry.
Starting with an empty queue I try and do a windows test page. The
errors are generated and a 0 byte job is in the queue.
Can someone point me in the right direction.
Steve
pixie# lpq
no entries
pixie# Aug 26 00:17:28 pixie lpd[15274]:
musashi.murdoch-technology.com.au
Aug 26 00:17:28 pixie lpd[15274]: musashi.murdoch-technology.com.au
Aug 26 00:17:28 pixie lpd[15274]: Lost connection
Aug 26 00:17:28 pixie lpd[15274]: Lost connection
pixie# lpq
Rank Owner Job
Files
Total Size
1st Steve 20 Test
Page
0 bytes
pixie#
# $OpenBSD: printcap,v 1.4 2003/03/28 21:32:30 jmc Exp $
#lp|local line printer:\
# :lp=/dev/lp:sd=/var/spool/output:lf=/var/log/lpd-errs:
#rp|remote line printer:\
#
:lp=:rm=printhost:rp=lp:sd=/var/spool/output:lf=/var/log/lpd-errs:
hp|lp|local line printer:\
:lp=/dev/ulpt0:sd=/var/spool/output/hp:sh:lf=/var/log/lpd-errs:
Copyright (c) 1995-2005 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 3.7 (GENERIC) #431: Sun Mar 20 14:10:02 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC
total memory = 1073741824
avail memory = 969678848
using 6553 buffers containing 53682176 bytes of memory
bootpath: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],0/[EMAIL PROTECTED],0
mainbus0 (root): Sun Netra X1 (UltraSPARC-IIe 500MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 500 MHz, version 0 FPU
cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 256K
external (64 b/l)
psycho0 at mainbus0
SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 0; PCI bus 0
DVMA map: 60000000 to 80000000
IOTDB: 4d0c000 to 4d8c000
pci0 at psycho0
ebus0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
dma at ebus0 addr 0-ffff ipl 42 not configured
rtc0 at ebus0 addr 70-71: m5819
power at ebus0 addr 2000-2007 ipl 35 not configured
SUNW,lomh at ebus0 addr 8010-8011 ipl 42 not configured
com0 at ebus0 addr 3f8-3ff ipl 43: ns16550a, 16 byte fifo
com0: console
com1 at ebus0 addr 2e8-2ef ipl 43: ns16550a, 16 byte fifo
flashprom at ebus0 addr 0-7ffff not configured
"Acer Labs M7101 Power Mgmt" rev 0x00 at pci0 dev 3 function 0 not
configured
"Acer Labs M7101 Power Mgmt" rev 0x00 at pci0 dev 3 function 0 not
configured
dc0 at pci0 dev 12 function 0 "Davicom DM9102" rev 0x31: ivec 3006,
address 00:03:ba:0f:d0:5d
amphy0 at dc0 phy 1: DM9102 10/100 PHY, rev. 0
dc1 at pci0 dev 5 function 0 "Davicom DM9102" rev 0x31: ivec 301c,
address 00:03:ba:0f:d0:5e
amphy1 at dc1 phy 1: DM9102 10/100 PHY, rev. 0
ohci0 at pci0 dev 10 function 0 "Acer Labs M5237 USB" rev 0x03: ivec
24, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc3:
DMA, channel 0 configured to native-PCI, channel 1 configured to
native-PCI
pciide0: using ivec 180c for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST340016A>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1 at pciide0 channel 1 drive 0: <ST340016A>
wd1: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
pcons at mainbus0 not configured
No counter-timer -- using %tick at 500MHz as system clock.
ulpt0 at uhub0 port 1 configuration 1 interface 0
ulpt0: Hewlett-Packard HP LaserJet 1022, rev 2.00/1.00, addr 2, iclass
7/1
ulpt0: using bi-directional mode
root on wd0a
rootdev=0xc00 rrootdev=0x1a00 rawdev=0x1a02
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
