Maybe. The older cards have some issues that need to be worked around in the
driver. This is very tricky stuff though and takes a lot of time to get right.
On Thu, Aug 18, 2005 at 05:13:38PM +0200, Laurens Vets wrote:
> Thanks for the information. Will it ever be?
>
> Marco Peereboom wrote:
> >This controller is currently not supported.
> >
> >On Thu, Aug 18, 2005 at 01:14:01PM +0200, Laurens Vets wrote:
> >
> >>Hi all,
> >>
> >>I've just upgraded to -current (3.8-beta, snapshots op August 16th) to
> >>try out the bioctl utility on my raid controller. However, when I try
> >>to access it, I always get the error "bioctl: bioc_ioctl() call failed":
> >>
> >># bioctl -Dhiv ami0
> >>bioctl: cookie = 0xd0c56e80
> >>bio_inq
> >>bioctl: bioc_ioctl() call failed
> >>
> >># bioctl -Dhiv sd0
> >>bioctl: cookie = 0x0
> >>bio_inq
> >>bioctl: bioc_ioctl() call failed
> >>
> >># bioctl -Dhiv -a get ami0
> >>bioctl: cookie = 0xd0c56e80
> >>bio_inq
> >>bioctl: bioc_ioctl() call failed
> >>
> >>Any ideas to what I might be doing wrong? The controller is a Dell
> >>PERC2/SC in `Mass Storage' mode. Full dmesg:
> >>
> >>OpenBSD 3.8-beta (GENERIC.MP) #260: Tue Aug 16 07:20:51 MDT 2005
> >> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> >>cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 499 MHz
> >>cpu0:
> >>FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MM
> >>X,FXSR,SSE
> >>real mem = 268013568 (261732K)
> >>avail mem = 237621248 (232052K)
> >>using 3297 buffers containing 13504512 bytes (13188K) of memory
> >>mainbus0 (root)
> >>bios0 at mainbus0: AT/286+(00) BIOS, date 02/13/03, BIOS32 rev. 0 @
> >>0xffe90
> >>pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> >>pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc7c0/176 (9 entries)
> >>pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
> >>pcibios0: PCI bus #4 is the last bus
> >>bios0: ROM list: 0xc0000/0x8000 0xc8000/0xc00 0xc9000/0x800 0xc9800/0x800
> >>mainbus0: Intel MP Specification (Version 1.4) (DELL PowerEdge 81)
> >>cpu0 at mainbus0: apid 1 (boot processor)
> >>cpu0: apic clock running at 99 MHz
> >>cpu1 at mainbus0: apid 0 (application processor)
> >>cpu1: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 499 MHz
> >>cpu1:
> >>FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MM
> >>X,FXSR,SSE
> >>mainbus0: bus 0 is type PCI
> >>mainbus0: bus 1 is type PCI
> >>mainbus0: bus 2 is type PCI
> >>mainbus0: bus 3 is type PCI
> >>mainbus0: bus 4 is type PCI
> >>mainbus0: bus 5 is type ISA
> >>ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
> >>ioapic0: misconfigured as apic 0, remapped to apic 2
> >>pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> >>pchb0 at pci0 dev 0 function 0 "Intel 82440BX AGP" rev 0x00
> >>ppb0 at pci0 dev 1 function 0 "Intel 82440BX AGP" rev 0x00
> >>pci1 at ppb0 bus 1
> >>vga1 at pci1 dev 0 function 0 "ATI Mach64 GD" rev 0x5c
> >>wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> >>wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> >>ppb1 at pci0 dev 2 function 0 "DEC 21152 PCI-PCI" rev 0x03
> >>pci2 at ppb1 bus 2
> >>ahc1 at pci2 dev 4 function 0 "Adaptec AIC-7890/1 U2" rev 0x00: apic 2
> >>int 16 (i
> >>rq 11)
> >>scsibus0 at ahc1: 16 targets
> >>ahc2 at pci2 dev 6 function 0 "Adaptec AIC-7860" rev 0x03: apic 2 int 16
> >>(irq 11
> >>)
> >>scsibus1 at ahc2: 8 targets
> >>cd0 at scsibus1 targ 5 lun 0: <NEC, CD-ROM DRIVE:466, 1.06> SCSI2
> >>5/cdrom remova
> >>ble
> >>ppb2 at pci2 dev 10 function 0 "Intel i960 RP PCI-PCI" rev 0x05
> >>pci3 at ppb2 bus 3
> >>ami0 at pci2 dev 10 function 1 "Intel 80960RP ATU" rev 0x05: apic 2 int
> >>18 (irq
> >>10) Dell 466v2/32b
> >>ami0: FW 3.00, BIOS v1.36, 16MB RAM
> >>ami0: 1 channels, 16 targets, 1 logical drives
> >>scsibus2 at ami0: 1 targets
> >>sd0 at scsibus2 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
> >>sd0: 42840MB, 5461 cyl, 255 head, 63 sec, 512 bytes/sec, 87736320 sec
> >>total
> >>scsibus3 at ami0: 16 targets
> >>safte0 at scsibus3 targ 6 lun 0: <DELL, 1x6 U2W SCSI BP, 5.33> SCSI2
> >>3/processor
> >>fixed
> >>pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
> >>pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
> >>channel 0 wi
> >>red to compatibility, channel 1 wired to compatibility
> >>pciide0: channel 0 ignored (disabled)
> >>pciide0: channel 1 ignored (disabled)
> >>uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01pci_intr_map:
> >>bus 0 d
> >>ev 7 func 2 pin 4; line 5
> >>pci_intr_map: no MP mapping found
> >>isa_intr_establish: no MP mapping found
> >>: irq 5
> >>usb0 at uhci0: USB revision 1.0
> >>uhub0 at usb0
> >>uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> >>uhub0: 2 ports with 2 removable, self powered
> >>"Intel 82371AB Power" rev 0x02 at pci0 dev 7 function 3 not configured
> >>xl0 at pci0 dev 12 function 0 "3Com 3c905 100Base-TX" rev 0x00: apic 2
> >>int 22 (i
> >>rq 14), address 00:60:08:78:35:0c
> >>nsphy0 at xl0 phy 24: DP83840 10/100 PHY, rev. 1
> >>ppb3 at pci0 dev 14 function 0 "DEC 21152 PCI-PCI" rev 0x03
> >>pci4 at ppb3 bus 4
> >>"Sun PCIO Ebus2" rev 0x01 at pci4 dev 0 function 0 not configured
> >>hme0 at pci4 dev 0 function 1 "Sun HME" rev 0x01: address
> >>08:00:20:e4:22:53
> >>luphy0 at hme0 phy 1: LU6612 10/100 PHY, rev. 1
> >>hme0: using apic 2 int 22 (irq 14) for interrupt
> >>isp0 at pci4 dev 4 function 0 "QLogic ISP1020" rev 0x05: apic 2 int 17
> >>(irq 5)
> >>isp0: Polled Mailbox Command (0x2) Timeout
> >>isp0: Polled Mailbox Command (0x34) Timeout
> >>isp0: Polled Mailbox Command (0x8) Timeout
> >>isa0 at pcib0
> >>isadma0 at isa0
> >>pckbc0 at isa0 port 0x60/5
> >>pckbd0 at pckbc0 (kbd slot)
> >>pckbc0: using irq 1 for kbd slot
> >>wskbd0 at pckbd0: console keyboard, using wsdisplay0
> >>pcppi0 at isa0 port 0x61
> >>midi0 at pcppi0: <PC speaker>
> >>spkr0 at pcppi0
> >>sysbeep0 at pcppi0
> >>lpt0 at isa0 port 0x378/4 irq 7
> >>npx0 at isa0 port 0xf0/16: using exception 16
> >>pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> >>fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> >>fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> >>biomask ffff netmask ffff ttymask ffff
> >>pctr: 686-class user-level performance counters enabled
> >>mtrr: Pentium Pro MTRR support
> >>dkcsum: sd0 matches BIOS drive 0x80
> >>root on sd0a
> >>rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
> >>
> >>Thanks in advance!
