So...it's a bug ?
# audioctl play.rate
play.rate=8000
# audioctl play.rate=44100
audioctl: set failed: Invalid argument
# audioctl play.rate
play.rate=44100
#
I made a little prog (a "DSP"), where (like in audioctl.c), this ioctl
ALWAYS returns -1:
if (ioctl(ES, AUDIO_SETINFO, &Inf) < 0) err(0, "AUDIO_SETINFO");
(audioctl.c)
if (writeinfo && ioctl(fd, AUDIO_SETINFO, &info) < 0)
err(1, "set failed");
I think it's related to some device-independent driver...I don't have the
skills and time to go ahead, sorry :(
Thanks.
--
Andre
(# dmesg)
OpenBSD 3.7-current (GENERIC) #252: Wed Jul 20 14:26:27 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 551 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
cpu0: disabling processor serial number
real mem = 132685824 (129576K)
avail mem = 114495488 (111812K)
using 1645 buffers containing 6737920 bytes (6580K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(a4) BIOS, date 09/20/99, BIOS32 rev. 0 @ 0xfb130
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb5b0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/96 (4 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11 12
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82810" rev 0x03: rng active, 10Kb/sec
vga1 at pci0 dev 1 function 0 "Intel 82810 Graphics" rev 0x03: aperture at
0xd8000000, size 0x2000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
ral0 at pci1 dev 4 function 0 "Ralink RT2560" rev 0x01: irq 10, address
00:50:18:2e:42:4a
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
re0 at pci1 dev 5 function 0 "Realtek 8169" rev 0x10: irq 11, address
00:02:44:81:ef:80
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
emu0 at pci1 dev 10 function 0 "Creative Labs SoundBlaster Live" rev 0x0a:
irq 12
ac97: codec id 0x83847608 (SigmaTel STAC9708/11)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at emu0
"Creative Labs PCI Gameport Joystick" rev 0x0a at pci1 dev 10 function 1 not
configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST3120022A>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd1 at pciide0 channel 1 drive 0: <ST340015A>
wd1: 16-sector PIO, LBA, 38166MB, 78165360 sectors
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LG, DVD-ROM DRD8160B, 1.03> SCSI0 5/cdrom
removable
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask e3e5 netmask efe5 ttymask efe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
#
----- Original Message -----
From: "Ramiro Aceves" <[EMAIL PROTECTED]>
To: "Lost Reality" <[EMAIL PROTECTED]>
Cc: <misc@openbsd.org>
Sent: Tuesday, August 16, 2005 11:34 AM
Subject: Re: eap driver audioctl issue
Lost Reality wrote:
Hello
I have the same issue with a SB Live 5.1.
This message appears, but the setting is changed anyways...
--
Andre
Oh, yes, You are right, I was confused. The audioctl message apears, but
the setting really works.
Thank you very much
Ramiro.
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.10.10/73 - Release Date: 15/8/2005
