> dmesg?
OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile Intel(R) Pentium(R) 4 CPU 3.20GHz ("GenuineIntel"
686-class) 3.20 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 468688896 (457704K)
avail mem = 420716544 (410856K)
using 4278 buffers containing 23535616 bytes (22984K) of memory
User Kernel Config
UKC> disable pcibios
254 pcibios0 disabled
UKC> exit
Continuing...
mainbus0 (root)
bios0 at mainbus0: AT/286+(7f) BIOS, date 01/16/04, BIOS32 rev. 0 @ 0xfd700
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xf000 0xd0000/0x6000! 0xd6000/0x800! 0xd8000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "ATI", unknown product 0x5831 rev 0x02
ppb0 at pci0 dev 1 function 0 "ATI Radeon IGP 9100 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon Mobility IGP 9100" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ohci0 at pci0 dev 19 function 0 vendor "ATI", unknown product 0x4347
rev 0x01: irq 11, version 1.0, legacy support
ohci0: SMM does not respond, resetting
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 19 function 1 vendor "ATI", unknown product 0x4348
rev 0x01: irq 11, version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 19 function 2 vendor "ATI", unknown product 0x4345
rev 0x01: irq 11
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: single transaction translator
uhub2: 6 ports with 6 removable, self powered
vendor "ATI", unknown product 0x4353 (class serial bus subclass SMBus,
rev 0x17) at pci0 dev 20 function 0 not configured
pciide0 at pci0 dev 20 function 1 vendor "ATI", unknown product 0x4349
rev 0x00: DMA (unsupported), channel 0 configured to compatibility,
channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23FA-60>
wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-R6112, 1031> SCSI0
5/cdrom removable
pcib0 at pci0 dev 20 function 3 vendor "ATI", unknown product 0x434c rev 0x00
ppb1 at pci0 dev 20 function 4 vendor "ATI", unknown product 0x4342 rev 0x00
pci2 at ppb1 bus 2
"Texas Instruments TSB43AB21 FireWire" rev 0x00 at pci2 dev 0 function
0 not configured
ath0 at pci2 dev 2 function 0 "Atheros AR5212" rev 0x01: irq 11
ath0: mac 80.6 phy 4.1 radio 1.7 2.3, 802.11a/b/g, WOR4W, address
00:90:96:72:4d:f1
gpio at ath0 not configured
rl0 at pci2 dev 3 function 0 "Realtek 8139" rev 0x10: irq 11 address
00:02:3f:d3:3a:7b
rlphy0 at rl0 phy 0: RTL internal phy
cbb0 at pci2 dev 4 function 0 "ENE CB-1410 CardBus" rev
0x01pci_intr_map: no mapping for pin A
: couldn't map interrupt
vendor "ATI", unknown product 0x4341 (class multimedia subclass audio,
rev 0x00) at pci0 dev 20 function 5 not configured
vendor "ATI", unknown product 0x434d (class communications subclass
modem, rev 0x01) at pci0 dev 20 function 6 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask ef75 netmask ef75 ttymask fff7
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: vendor 0x062a product 0x0001, rev 1.10/0.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
-------
ifconfig -A
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33224
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
ath0: flags=8822<BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500
address: 00:90:96:72:4d:f1
ieee80211: nwid ""
media: IEEE802.11 autoselect
status: no network
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
address: 00:02:3f:d3:3a:7b
media: Ethernet autoselect (none)
status: no carrier
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::202:3fff:fed3:3a7b%rl0 prefixlen 64 scopeid 0x2
pflog0: flags=0<> mtu 33224
pfsync0: flags=0<> mtu 2020
enc0: flags=0<> mtu 1536
