During system boot, I see this:
Jul 21 10:52:05 tekkaman /bsd: cd0(atapiscsi0:0:0): Check Condition
(error 0x70) on opcode 0x0
Jul 21 10:52:06 tekkaman /bsd: SENSE KEY: Not Ready
Jul 21 10:52:06 tekkaman /bsd: ASC/ASCQ: Medium Not Present
Is it normal? Why the kernel should complain about that during boot?
This machine has ONLY cdrom attached to the motherboard ide
controller, while the disks are attached to a pci ide controller;
another system with disk and cdrom on the same flat cable doesn't that
give that "Medium Not Present" warning.
Only an old mail found on google about this topic, with no response..
Kernel is GENERIC with RAIDframe enable.
Greetings
dk
OpenBSD 3.7-stable (SPATOF) #1: Tue Jul 19 22:24:24 CEST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/SPATOF
cpu0: AMD Athlon(tm) Processor ("AuthenticAMD" 686-class) 908 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 267931648 (261652K)
avail mem = 236773376 (231224K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(1a) BIOS, date 03/06/01, BIOS32 rev. 0 @ 0xf0f50
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x17d2
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf1720/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:04:0 ("VIA VT82C686 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xbc00 0xcc000/0x4600
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8363 Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "VIA VT8363 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia GeForce2 MX" rev 0xb2
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 4 function 0 "VIA VT82C686 ISA" rev 0x40
pciide0 at pci0 dev 4 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LG, DVD-ROM DRD8160B, 1.00> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 4 function 2 "VIA VT83C572 USB" rev 0x16: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 4 function 3 "VIA VT83C572 USB" rev 0x16: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
viaenv0 at pci0 dev 4 function 4 "VIA VT82C686 SMBus" rev 0x40: HWM disabled
eap0 at pci0 dev 10 function 0 "Ensoniq CT5880" rev 0x02: irq 12
eap0: eap1371_read_codec timeout 2
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at eap0
midi0 at eap0: <AudioPCI MIDI UART>
pciide1 at pci0 dev 11 function 0 "HighPoint HPT36x/37x IDE" rev 0x03: DMA
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <Maxtor 6B200P0>
wd0: 16-sector PIO, LBA48, 194481MB, 398297088 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide1 channel 1 drive 0: <Maxtor 6B200P0>
wd1: 16-sector PIO, LBA48, 194481MB, 398297088 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
rl0 at pci0 dev 12 function 0 "Realtek 8139" rev 0x10: irq 11 address
00:e0:7d:7f:47:dd
rlphy0 at rl0 phy 0: RTL internal phy
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask e765 netmask ef65 ttymask efe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
Kernelized RAIDframe activated
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
raid0 (root): (RAID Level 1) total number of sectors is 397624704
(194152 MB) as root
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
rootdev=0x1300 rrootdev=0x3600 rawdev=0x3602
--
Hi, I'm a .signature virus! Copy me to your .signature file and
help me propagate, thanks!
