> > I have a little problem with hw.setperf. I installed OpenBSD 3.7 on my
> > Thinkpad x21. Everything works fine.
> > Except sysctl -w hw.setperf=*. I always get this message that
> > "sysctl: hw.setperf: value is not available" and I have no clue what
> > to do. Google doesn't help.
> >
> > Some information could be usefull:
> > hw.model=Intel Pentium 3 ("GenuineIntel" 686-class)
> > hw.machine=i386
>
> Some information could be useful, such as a dmesg. Please send to the
> list.
No problem! The dmesg output is in the attachment
thx.
bossk
OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 697 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 402169856 (392744K)
avail mem = 359841792 (351408K)
using 4278 buffers containing 20209664 bytes (19736K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(6e) BIOS, date 06/19/01, BIOS32 rev. 0 @ 0xfd820
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 13%
apm0: AC on, battery charge low, charging
pcibios0 at bios0: rev 2.1 @ 0xfd7b0/0x850
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdee0/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xd000! 0xcd000/0x1800 0xd8000/0x4000! 0xdc000/0x1000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mobility 1" rev 0x64
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS424040M9AT00>
wd0: 16-sector PIO, LBA48, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x03 at pci0 dev 7 function 3 not configured
cbb0 at pci0 dev 8 function 0 "Ricoh 5C476 CardBus" rev 0x80: irq 11
cbb1 at pci0 dev 8 function 1 "Ricoh 5C476 CardBus" rev 0x80: irq 11
fxp0 at pci0 dev 10 function 0 "Intel 82557" rev 0x0c, i82550: irq 11, address
00:03:47:8e:52:66
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
"AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 10 function 1 not configured
clct0 at pci0 dev 11 function 0 "Cirrus Logic CS4281 CrystalClear Audio" rev
0x01 irq 11
ac97: codec id 0x43525914 (Cirrus Logic CS4297A rev 4)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
audio0 at clct0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x0, lattimer 0xb0
pcmcia1 at cardslot1
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
